On 5/8/09, Alan Carvalho de Assis <acas...@gmail.com> wrote: > Hi list, > > I am trying to get an Amontec JTAGkey working with OpenOCD on Ubuntu > 8.10, but I have no success. > > I tried too old revision as 516 with no success, I followed this tutorial: > http://docs.tinyos.net/index.php/OpenOCD_for_IMote2 > > I used libftd2xx0.4.16.tar.gz, but tested also 0.4.15 and 0.4.13, the > the error is the same: > > Error: jtag.c:1291 jtag_examine_chain(): JTAG communication failure, > check connection, JTAG interface, target power etc. > > I was thinking JTAGkey had better support than J-Link, but J-Link at > least can to detect my board. > > The Linux host appear to detect the interface correctly (see below), > but OpenOCD can't to communicate with it. > > Any comments or suggestion will be appreciated. >
I figured out the issue was in the JTAG interface, it is not working. In order to test I used CrossWorks on Windows. > Best Regards, > > Alan Regards, Alan _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
