On Fri, May 01, 2009 at 12:56:43AM +0200, Uwe Hermann wrote:
> Add Hitex STR9-comStick config file. Support both the -A1 and -A2
> revisions using the same config file.
Forgot the patch.
Uwe.
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Index: src/target/target/str9comstick.cfg
===================================================================
--- src/target/target/str9comstick.cfg (Revision 1583)
+++ src/target/target/str9comstick.cfg (Arbeitskopie)
@@ -39,9 +39,12 @@
if { [info exists BSTAPID ] } {
set _BSTAPID $BSTAPID
} else {
- set _BSTAPID 0x1457f041
+ # Found on STR9-comStick, revision STR912CS-A1
+ set _BSTAPID1 0x1457f041
+ # Found on STR9-comStick, revision STR912CS-A2
+ set _BSTAPID2 0x2457f041
}
-jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
+jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
Index: src/target/board/hitex_str9_comstick.cfg
===================================================================
--- src/target/board/hitex_str9_comstick.cfg (Revision 0)
+++ src/target/board/hitex_str9_comstick.cfg (Revision 0)
@@ -0,0 +1,11 @@
+#
+# Hitex STR9-comStick
+#
+# http://www.hitex.com/index.php?id=383
+#
+
+# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
+
+source [find interface/str9-comstick.cfg]
+source [find target/str9comstick.cfg]
+
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
