I attach a config file for LPC2103 - hope that I've done that right (;
4\/3!!
Index: src/target/target/lpc2103.cfg
===================================================================
--- src/target/target/lpc2103.cfg (revision 0)
+++ src/target/target/lpc2103.cfg (revision 0)
@@ -0,0 +1,35 @@
+# NXP LPC2103 ARM7TDMI-S with 32kB Flash and 8kB SRAM, clocked with 12MHz
crystal
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME lpc2103
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ set _CPUTAPID 0x4f1f0f0f
+}
+
+# LPC2000 -> SRST causes TRST
+reset_config trst_and_srst srst_pulls_trst
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id
$_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position
$_TARGETNAME -variant arm7tdmi-s_r4
+
+# 8kB of internal SRAM
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000
-work-area-size 0x2000 -work-area-backup 0
+
+# 32kB of internal Flash, core clocked with 12MHz crystal
+# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock>
[calc_checksum]
+flash bank lpc2000 0x0 0x8000 0 0 0 lpc2000_v2 12000 calc_checksum
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
