It's astounding how many ways you can find to misspell ixp42x.
Fix various ixp42x typos in config files. Also, rename an incorrectly
named 'pxi42x.cfg' file.
Untested, but should work. I doubt the current svn files work.
Uwe.
--
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
Index: src/target/target/nslu2.cfg
===================================================================
--- src/target/target/nslu2.cfg (Revision 1427)
+++ src/target/target/nslu2.cfg (Arbeitskopie)
@@ -1,7 +1,7 @@
-# This is for the LinkSys (CYSCO) LSLU2 board
-# It is an Intel XSCALE IPX420 CPU.
+# This is for the LinkSys (CISCO) NSLU2 board
+# It is an Intel XSCALE IXP420 CPU.
-source [find target/ipx42x.cfg]
+source [find target/ixp42x.cfg]
# The _TARGETNAME is set by the above.
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x10000 -work-area-backup 0
Index: src/target/target/pxi42x.cfg
===================================================================
--- src/target/target/pxi42x.cfg (Revision 1427)
+++ src/target/target/pxi42x.cfg (Arbeitskopie)
@@ -1,32 +0,0 @@
-#xscale ixp42x CPU
-
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME ipx42x
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- # this defaults to a bigendian
- set _ENDIAN big
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # force an error till we get a good number
- set _CPUTAPID 0xffffffff
-}
-
-#use combined on interfaces or targets that can?t set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-#jtag scan chain
-
-jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ipxP42x
-
Index: src/target/target/ixp42x.cfg
===================================================================
--- src/target/target/ixp42x.cfg (Revision 0)
+++ src/target/target/ixp42x.cfg (Revision 0)
@@ -0,0 +1,32 @@
+#xscale ixp42x CPU
+
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME ixp42x
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ # this defaults to a bigendian
+ set _ENDIAN big
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # force an error till we get a good number
+ set _CPUTAPID 0xffffffff
+}
+
+#use combined on interfaces or targets that can?t set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+#jtag scan chain
+
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant ixp42x
+
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
