here is the windows installer - anyone with Windows - test it please (;
http://chopin.elektroda.eu/OpenOCD_0.1.0_installer.zip
any suggestions? are there any more drivers which should be supplied? I
attached rlink (as this one is special for openocd), turtelizer2 (as it
cannot be found anywhere but in openocd releases [; ) and giveio for
parallel port dongles. any more?
should anything more be added? maybe something should be removed?
now the release looks like this
installer name: OpenOCD 0.1.0 installer.msi
default install dir: Program Files/OpenOCD/0.1.0/
inside the main dir:
bin\
board\
drivers\
interface\
source\
target\
build_info.txt
license.txt
openocd manual.pdf
bin\ subdir holds just the compiled executable
biard\, interface\ and target\ - obvious [;
drivers\ :
giveio.zip
rlink.zip
turtelizer2.zip
source\ - the tarball from the openocd site
the build_info.txt was added by me - i attach it to the message - it
holds the date of build and installer creation, info on the build
command, machine, system and installer type.
the license.txt - that's the COPYING file...
the installer adds the install dir (the bin\ subdir actually) to the
system and user PATH variable. the license displayed is the GPL from the
COPYING file.
any suggestions for changes?
4\/3!!
OpenOCD 0.1.0
build date: 21.01.2008
installer date: 25.01.2008
OpenOCD executable was build by Freddie Chopin on Windows 2003 Server SP2 @
Intel Core2Duo. The build process was performed on MinGW 5.1.4 with MSYS 1.0.10
(+ lots of additional modules). The following build config was used:
--enable-parport --enable-parport_giveio --enable-ft2232_ftd2xx --enable-ep93xx
--enable-at91rm9200 --enable-usbprog --enable-presto_ftd2xx --enable-jlink
--enable-vsllink --enable-rlink --enable-dummy -enable-gw16012
--enable-amtjtagaccel
The installer was created using Wix 3.
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
