Tested on Fedora 10 using the following commands:
libftdi:
./configure --enable-parport --enable-parport_ppdev
--enable-ft2232_libftdi --enable-ep93xx --enable-at91rm9200
--enable-usbprog --enable-presto_libftdi --enable-jlink --enable-vsllink
--enable-rlink --enable-dummy --enable-gw16012 --enable-amtjtagaccel
--prefix=$HOME/tools/openocd-0.1.0/
make all install
Everything compiles and appears to run fine.
libftd2xx:
./configure --enable-parport --enable-parport_ppdev
--enable-ft2232_ftd2xx --enable-ep93xx --enable-at91rm9200
--enable-usbprog --enable-presto_libftdi --enable-jlink --enable-vsllink
--enable-rlink --enable-dummy --enable-gw16012 --enable-amtjtagaccel
--prefix=$HOME/tools/openocd-0.1.0/
make all install
Everything compiles and runs fine.
It's looking good. Thanks for going through all the trouble of bringing
everything together for a release, Rick.
// Dean
Rick Altherr wrote:
Due to the fixes for 'make maintainer-clean' and handling release
versioning better, I've spun yet another 0.1.0 source distribution.
I've placed it at http://www.kc8apf.net/files/openocd-0.1.0.tar.gz per
usual. 'make distcheck' passes on OS X 10.5. Same request applies:
try to compile on various OSes and report results.
Thanks for everyone's patience as we get this first release worked
out. Your help testing and fixing has been very welcome.
Rick
--
Rick Altherr
kc8...@kc8apf.net
"He said he hadn't had a byte in three days. I had a short, so I split
it with him."
-- Unsigned
------------------------------------------------------------------------
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
