Hello mgross. I've put this option in my config file, but the I've notice that the device didn't start until I umplug the USB cable.
Spin 2009/1/9 mark gross <mark97...@gmail.com> > I've had a similar issue with being able to flash the device but not start > the code. > > I found the root cause to be /usr/local/lib/openocd/target/lpc2148.cfg. > > It has the flash bank config line missing the calc_checksum option. > > I don't know how that relates to the 2378 but I'd check your flash bank > command. > > --mgross > > On Fri, Jan 9, 2009 at 4:46 AM, Alexandre Umino (Spin) < > alexandre.s...@gmail.com> wrote: > >> Hello >> >> I'm working with the OpenOCD. I read the documentation and write myself >> the config files to program my device. I'm using the LPC2378. >> >> The parport inteface works fine, but the Olimex Arm-USB-OCD doen't. My >> device don't start after I wrote my program in the device flash. >> >> Could anybody send me any examples of this configuration? I saw in the >> documentation that the good idea is to separate the files, but I didn't see >> any that works fine. >> >> Thanks >> >> Alexandre >> >> >> >> >> >> _______________________________________________ >> Openocd-development mailing list >> Openocd-development@lists.berlios.de >> https://lists.berlios.de/mailman/listinfo/openocd-development >> >> >
_______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
