On Fri, Jan 9, 2009 at 1:12 PM, Alan Carvalho de Assis <acas...@gmail.com> wrote: > Hi Øyvind, > > On Fri, Jan 9, 2009 at 7:52 AM, Øyvind Harboe <oyvind.har...@zylin.com> wrote: >> Do we have any arm11 testers/users on this list? >> >> I'm poking around the arm11 code and wondering if I should pull down i.MX31 >> from the shelf to take it for a spin... >> > > I can help you testing it! > > Please let send me instructions in order to test it.
I need a working configuration file. Hopefully Kees will provide it :-) For now I've committed a new imx31.cfg file. It has a couple of syntax errors weeded out, but it needs work still. If you are comfortable reading the datasheets I'm sure you can figure out what's missing :-) 1. rebuild latest openocd 2. Run: openocd -f interface/myinterface.cfg -f target/imx31.cfg > reset init JTAG tap: imx31.sjc tap/device found: 0x2b900f0f (Manufacturer: 0x787, Part: 0xb900, Version: 0x2) JTAG Tap/device matched JTAG tap: imx31.cpu tap/device found: 0x07b3601d (Manufacturer: 0x00e, Part: 0x7b36, Version: 0x0) JTAG Tap/device matched Tap/Device does not have IDCODE JTAG Tap/device matched JTAG tap: imx31.smda tap/device found: 0x2190101d (Manufacturer: 0x00e, Part: 0x1901, Version: 0x2) JTAG Tap/device matched Error validating JTAG scan chain, IR mismatch, scan returned 0x042011 Could not validate JTAG chain, continuing anyway... .... -- Øyvind Harboe http://www.zylin.com/zy1000.html ARM7 ARM9 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
