Kees >> (earlier a patch for a samsung part)
Kees >> [a new email with more ID codes]
Thanks - committed.
I also found 2 other CFG files with the same "variant" typo :-(
I guess I am very good at typos!
--Duane
===
bash-3.2$ svn diff
Index: imote2.cfg
===================================================================
--- imote2.cfg (revision 1222)
+++ imote2.cfg (working copy)
@@ -35,7 +35,7 @@
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f
-expected-id $_CPUTAPID
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position
$_TARGETNAME -varient pxa27x
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position
$_TARGETNAME -variant pxa27x
$_TARGETNAME configure -work-area-virt 0x0x5c000000 -work-area-phys
0x0x5c000000 -work-area-size 0x10000 -work-area-backup 1
# maps to PXA internal RAM. If you are using a PXA255
# you must initialize SDRAM or leave this option off
Index: is5114.cfg
===================================================================
--- is5114.cfg (revision 1222)
+++ is5114.cfg (working copy)
@@ -39,7 +39,7 @@
#arm946e-s and
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position
$_TARGETNAME -varient arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position
$_TARGETNAME -variant arm966e
$_TARGETNAME configure -event reset-start { jtag_rclk 16 }
$_TARGETNAME configure -event reset-init {
Index: samsung_s3c6410.cfg
===================================================================
--- samsung_s3c6410.cfg (revision 1222)
+++ samsung_s3c6410.cfg (working copy)
@@ -23,14 +23,14 @@
set _BSTAPID $BSTAPID
} else {
# force an error till we get a good number
- set _BSTAPID 0xffffffff
+ set _BSTAPID 0x2b900f0f
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
- set _CPUTAPID 0xffffffff
+ set _CPUTAPID 0x07b76f0f
}
#jtag scan chain
@@ -40,7 +40,7 @@
jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f
-expected-id $_CPUTAPID
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position
$_TARGETNAME -varient arm1176
+target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position
$_TARGETNAME -variant arm1176
jtag_nsrst_delay 500
jtag_ntrst_delay 500
bash-3.2$
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
