hey guys, looks like the point of failure is svn revision 826 where the gdb keep alive messages are added to avoid "cryptic error messages" (from the change log).
This is the error from 826 826 failure on load: Open On-Chip Debugger 1.0 (2008-11-04-18:19) svn:826 $URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $ Info: jtag.c:1392 jtag_examine_chain(): JTAG device found: 0x79265013 (Manufacturer: 0x009, Part: 0x9265, Version: 0x7) Warning: telnet_server.c:624 telnet_init(): no telnet port specified, using default port 4444 Warning: gdb_server.c:2009 gdb_init(): no gdb port specified, using default port 3333 Warning: tcl_server.c:179 tcl_init(): no tcl port specified, using default port 6666 Info: jtag.c:1392 jtag_examine_chain(): JTAG device found: 0x79265013 (Manufacturer: 0x009, Part: 0x9265, Version: 0x7) Warning: log.c:359 keep_alive(): keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (3104) Open On-Chip Debugger 1.0 (2008-11-04-18:19) svn:826 $URL: http://svn.berlios.de/svnroot/repos/openocd/trunk/src/openocd.c $ Info: jtag.c:1392 jtag_examine_chain(): JTAG device found: 0x79265013 (Manufacturer: 0x009, Part: 0x9265, Version: 0x7) Warning: telnet_server.c:624 telnet_init(): no telnet port specified, using default port 4444 Warning: gdb_server.c:2009 gdb_init(): no gdb port specified, using default port 3333 Warning: tcl_server.c:179 tcl_init(): no tcl port specified, using default port 6666 Info: jtag.c:1392 jtag_examine_chain(): JTAG device found: 0x79265013 (Manufacturer: 0x009, Part: 0x9265, Version: 0x7) Warning: log.c:359 keep_alive(): keep_alive() was not invoked in the 1000ms timelimit. GDB alive packet not sent! (31 Let me know if this was of any help. I haven't tried the patch you sent quite yet (to clean up the code) but i'll get to it tomm.. peace, federico "Anyone who has never made a mistake has never tried anything new." - Albert Einstein On Fri, Oct 31, 2008 at 1:55 PM, Øyvind Harboe <[EMAIL PROTECTED]> wrote: > On Fri, Oct 31, 2008 at 1:53 PM, Federico Spadini <[EMAIL PROTECTED]> wrote: >> Hi Oyvind, >> Quick question, when running through versions, any tips on the >> configure/compile/install process or just proceed as usual? AKA, do >> you have a better methodology than what I'm currently doing to do the >> testing? > > Not really, except keep in mind that you can have many source and build > directories. Each source/build directory can be for a seperate svn number. > > Be sure to try the patch I included! I'd like to delete that code from XScale! > >> >> Thanks a bunch, >> Federico >> >> "Anyone who has never made a mistake has never tried anything new." >> - Albert Einstein >> >> >> >> On Fri, Oct 31, 2008 at 1:51 PM, Øyvind Harboe <[EMAIL PROTECTED]> wrote: >>> On Fri, Oct 31, 2008 at 1:50 PM, Federico Spadini <[EMAIL PROTECTED]> wrote: >>>> Ahoy, >>>> I agree with you whole heartedly, there shouldn't be any difference >>>> between 1109 and 1112, but for some reason the slow down was notable, >>>> also, sorry if I was a little unclear, the flashing does NOT work on >>>> any of the latest versions, the same bug/error always comes out. The >>>> latest known working version is 516 as this is what the rest of the >>>> tinyos community is using. >>>> >>>> I can give you a config for the iMote2 on monday as today I don't >>>> have much time to play with the recompile. I'll do a revert to >>>> 1036/build/install and let you know if there is a noticeable >>>> difference. Thank you for the patch, i'll post details on Monday! >>> >>> 1036 was just a guess. The problem may be further back. Do a binary search >>> if you can. >>> >>>> >>>> Thanks, >>>> Federico >>>> >>>> PS: Thanks for the quick reply! >>> >>> Thanks for testing XSCale. We need more testing on it! >>> >>>> >>>> >>>> "Anyone who has never made a mistake has never tried anything new." >>>> - Albert Einstein >>>> >>>> >>>> >>>> On Fri, Oct 31, 2008 at 1:24 PM, Øyvind Harboe <[EMAIL PROTECTED]> wrote: >>>>> On Fri, Oct 31, 2008 at 1:06 PM, Federico Spadini <[EMAIL PROTECTED]> >>>>> wrote: >>>>>> Hi Guys, >>>>>> >>>>>> <sorry i zipped the log, it was too big to go on the list otherwise> >>>>>> >>>>>> I've recently built OpenOCD SVN version 1112 under Ubuntu Linux 8.04 >>>>>> on AMD64 with the proper FTDI libraries. The target board is an iMote2 >>>>> >>>>> I'd like the imote2.cfg added to the target library. How is the attached >>>>> patch? >>>>> >>>>>> which consists of a PXA271 and an Intel Strataflash of 32 Megabytes >>>>>> (p30). I noticed a massive slow down between svn version 1109 and 1112 >>>>>> using the same configurations, as well as an error (which does not >>>>>> occur in version 516 (in reality, this is the version which other >>>>>> users are currently using: I decided to try the bleeding edge and see >>>>>> if I could rig up a patch to release to the community)). >>>>> >>>>> Are you saying that 1109 works? >>>>> >>>>> If not, what is the last version of OpenOCD SVN that works? >>>>> >>>>> Does 1036 work...? It messed around with the run_algorithm stuff.... >>>>> >>>>> Could you double check that there is a difference between 1109 and >>>>> 1112 for your case. It doesn't make any sense based upon the changelog... >>>>> >>>>> Also, I discovered some obsolete code for forcing breakpoints in xscale.c >>>>> that >>>>> I've deleted in the attached patch. >>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Øyvind Harboe >>>>> http://www.zylin.com/zy1000.html >>>>> ARM7 ARM9 XScale Cortex >>>>> JTAG debugger and flash programmer >>>>> >>>> >>> >>> >>> >>> -- >>> Øyvind Harboe >>> http://www.zylin.com/zy1000.html >>> ARM7 ARM9 XScale Cortex >>> JTAG debugger and flash programmer >>> >> > > > > -- > Øyvind Harboe > http://www.zylin.com/zy1000.html > ARM7 ARM9 XScale Cortex > JTAG debugger and flash programmer > _______________________________________________ Openocd-development mailing list Openocd-development@lists.berlios.de https://lists.berlios.de/mailman/listinfo/openocd-development
