Nick Foster wrote:
[help me - openocd is crashing, and gave a very good state of the problem]
The problem does not occur w/ my arm7tdmi target.
I can confirm I have the same type (not exactly same) of problem with my
stm32 board.
You are running Linux, I am running under cygwin.
That is good news - You are not alone.
Now the bad news ;-(
Part 1 of the problem -
Was caused by Oyvinds recent changes dealing with "keep_alive".
This has introduced a problem, keep_alive() needs a recursion block.
[Perhaps there is more to it, see below]
Your back trace shows the proof.
@ backtrace stack positions #4, #9, and #14 - show "keep_alive()"
has gone recursive.
#4 0x080995a3 in keep_alive () at log.c:37
#9 0x080995ad in keep_alive () at log.c:383
#14 0x080995ad in keep_alive () at log.c:383
That is *not* good.
That needs a fix.
Part 2 - Sadly there is a part 2.
I put a recursion block in - keep_alive (located in 'log.c' of all
places)
I still get an error :-( - it dies in another place.
I'm not as familiar with that section.
Perhaps - something needs to be done "higher up".
I'm not familiar with how Oyvind made that change.
FYI - it crashes does *WITH* and *WITHOUT* my new patch
(I just submitted)
In my case (part 2) it is crashing deep inside the jtag code.
I can't do much else tonight.
-Duane.
_______________________________________________
Openocd-development mailing list
Openocd-development@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/openocd-development
