Hi,
I believe there is a bug where "Full-Fit" is only applied to the first
whiteboard.
Any new whiteboard/s do not load presentations as "Full-Fit" unless the
person firsts (that is if they have the rights to be able to set
Full-Fit) selects "Full-Fit" before the presentation is loaded to the
whiteboard.
Basically, the first whiteboard is loaded with "Full-Fit" selected and a
zoom value of 100. Any new Whiteboards are opened with Full-Fit not
selected, and a zoom value of 50 (regardless of loading any
presentations or not loading any presentations).
This is not good as it means that presentations loaded to second and
subsequent whiteboards do not show as Full-Fit in the Whiteboards of any
guests, and guests by default cannot select Full-Fit unless they are
given the write to draw on the screen.
Steps to reproduce the issue.
1) Person A logs into conference room (and becomes moderator by
entering the room)
2) Person B logs into the conference room (and therefore is a
guest)
3) Person A loads large sized presentation to the Whiteboard
4) Person A and B see the presentation resized to "Full-Fit" their
own individual screens (all looks good)
5) Person A selects a new whiteboard and then loads a large sized
presentation
6) Person A and B see the presentation shown to 100 (i.e. 100 %
size of document), but not as Full-Fit. If Person A gives person B the
right to draw on the Whiteboard, then Person B sees the "Full-Fit" as
being not being selected (and in my test the size was shown as 50), but
the document on the whiteboard was display as though it was set to 100.
Person A sees their "Full-Fit" as not being selected and a zoom setting
of 50, but it is showing as a zoom of 100.
7) When Person B clicks the zoom slider, it changes to 100 without
them moving the slider, that is though it does not show 100, the
internal value is 100, and the zoom number changes to the 100 value as
soon as they select the slider.
8) If Person A creates a third or more Whiteboards, then these
whiteboard are opened with the "Full-Fit" setting unselected (i.e not
selected), and set to 50. If Person A changes their "Full-Fit" setting
before or after loading a presentation to the Whiteboard, these changes
do not affect Person B who will see the presentation displayed at 100,
despite their screen showing a zoom of 50.
Thanks,
George Kirkham
