Hi Russel,
----- Ursprüngliche Mail ----- > Von: "russell" <[email protected]> > An: "stephan budach" <[email protected]> > Gesendet: Samstag, 13. Januar 2018 22:55:14 > Betreff: [OpenIndiana-discuss] OI_Hipster doesn't register, > AOC-STG-I4S/BCM57840S 10GbE SFP adaptor > > Hi Stephan, > > On your system run "prtconf -pv" and search though the listing to > find > the Broadcom 57840S information that will provide you with the Node > information. > > Node 0x00002b > assigned-addresses: > 82850010.00000000.bffe0000.00000000.00020000.82850014.00000000.bffc0000.00000000.00020000.81850018.00000000.0000ec00.00000000.00000020 > reg: > 00850000.00000000.00000000.00000000.00000000.02850010.00000000.00000000.00000000.00020000.02850014.00000000.00000000.00000000.00020000.01850018.00000000.00000000.00000000.00000020 > compatible: 'pciex8086,105e.8086.115e.6' + > 'pciex8086,105e.8086.115e' + 'pciex8086,105e.6' + 'pciex8086,105e' + > 'pciexclass,020000' + 'pciexclass,0200' + 'pci8086,105e.8086.115e.6' > + > 'pci8086,105e.8086.115e' + 'pci8086,115e' + 'pci8086,105e.6' + > 'pci8086,105e' + 'pciclass,020000' + 'pciclass,0200' > model: 'Ethernet controller' > power-consumption: 00000001.00000001 > devsel-speed: 00000000 > interrupts: 00000001 > subsystem-vendor-id: 00008086 > subsystem-id: 0000115e > unit-address: '0' > class-code: 00020000 > revision-id: 00000006 > vendor-id: 00008086 > device-id: 0000105e > name: 'pci8086,115e' > > When you find the device, make a note of the name. In the example > above > the Intel Ethernet adapter it is pci8086,115e > > You then need to edit the /etc/driver_aliases, search through until > you > find the entries for the Broadcom driver bnxe > > bnxe "pci14e4,164e" > bnxe "pci14e4,164f" > bnxe "pci14e4,1650" > bnxe "pciex14e4,164e" > bnxe "pciex14e4,164f" > bnxe "pciex14e4,1650" > bnxe "pciex14e4,16a1" > bnxe "pciex14e4,16a5" > bnxe "pciex14e4,16a4" > bnxe "pciex14e4,168a" > bnxe "pciex14e4,168d" > bnxe "pciex14e4,168e" > bnxe "pciex14e4,16ab" > bnxe "pciex14e4,16ae" > bnxe "pciex14e4,1662" > bnxe "pciex14e4,1663" > > Duplicate the last entry, and replace the vendor-id,device-id > information you found when performing the prtconf -pv > > This will only work if the current Broadcom driver is compatible with > your chipset but has not been updated to reflect support. > If you find it works, create a support ticket to get the change > included > in OpenIndiana/IllumOS. > > Hope that helps > > Russell > > thanks - I knew, I missed something, when I tried to query the installed PCI devices. Firts off, I'll have to correct myself. The NIC installed is actually an Intel 710 one, as prtconf -pv has revealed: Node 0x0000b2 acpi-namespace: '\_SB_.PCI1.QR1A.D084' assigned-addresses: c3820010.00000000.f9800000.00000000.00800000.c382001c.00000000.fa018000.00000000.00008000 reg: 00820000.00000000.00000000.00000000.00000000.43820010.00000000.00000000.00000000.00800000.4382001c.00000000.00000000.00000000.00008000 compatible: 'pciex8086,1572.15d9.87e.2' + 'pciex8086,1572.15d9.87e' + 'pciex8086,1572.2' + 'pciex8086,1572' + 'pciexclass,020000' + 'pciexclass,0200' + 'pci8086,1572.15d9.87e.2' + 'pci8086,1572.15d9.87e' + 'pci15d9,87e' + 'pci8086,1572.2' + 'pci8086,1572' + 'pciclass,020000' + 'pciclass,0200' model: 'Ethernet controller' power-consumption: 00000001.00000001 devsel-speed: 00000000 interrupts: 00000001 subsystem-vendor-id: 000015d9 subsystem-id: 0000087e unit-address: '0' class-code: 00020000 revision-id: 00000002 vendor-id: 00008086 device-id: 00001572 name: 'pci15d9,87e' 8086:1572, that resolves to an Intel x710, actually the card I ordered. This card needs the i40e driver, which hadn't been installed and I wonder why that was. After installing the i40e driver manually, the card got initialized. Thank you, Stephan _______________________________________________ openindiana-discuss mailing list [email protected] https://openindiana.org/mailman/listinfo/openindiana-discuss
