I applied this remedy without change in outcome.
Thanks!
David
da...@kosmosisland.com
On 11/01/2017 11:05 AM, Grüninger, Andreas (LGL Extern) wrote:
Maybe the system did not detect that the fault is already cleared.
If you look in /var/adm/messages you will find the entries from fmadm with the
ID.
If
fmadm faulty
spits out messages concerning this device, you can clear the state with
fmadm acquit
or
fmadm repaired.
-----Ursprüngliche Nachricht-----
Von: David Koski [mailto:da...@kosmosisland.com]
Gesendet: Mittwoch, 1. November 2017 15:49
An: openindiana-discuss@openindiana.org
Betreff: Re: [OpenIndiana-discuss] Duplicate devices in zpool, degraded
Thank you, Andreas. I tried:
zpool clear syspool
zpool status -x
..but nothing changed. I also scrubbed it without effect.
Regards,
David
On 11/01/2017 02:59 AM, Grüninger, Andreas (LGL Extern) wrote:
Use
zpool clear syspool
zpool status -x
Andreas
-----Ursprüngliche Nachricht-----
Von: David Koski [mailto:da...@kosmosisland.com]
Gesendet: Mittwoch, 1. November 2017 07:28
An: openindiana-discuss@openindiana.org
Betreff: [OpenIndiana-discuss] Duplicate devices in zpool, degraded
The boot drive had uncorrectable errors but still not faulted. I put the
mirrored drive into the boot drive position (c2t1d0s0 into slot of
c2t0d0s0) and put a new drive in place of the drive that was moved into the
boot position, then booted the machine and resilvered. However, the boot drive
has a strange status where it appears twice in the zpool status, once faulted
and once not:
# zpool status -x
pool: syspool
state: DEGRADED
status: One or more devices could not be used because the label is missing or
invalid. Sufficient replicas exist for the pool to continue
functioning in a degraded state.
action: Replace the device using 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-4J
scan: scrub repaired 0 in 0h3m with 0 errors on Tue Oct 31 21:59:25 2017
config:
NAME STATE READ WRITE CKSUM
syspool DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
c2t0d0s0 FAULTED 0 0 0 corrupted data
c2t0d0s0 ONLINE 0 0 0
c2t1d0s0 ONLINE 0 0 0
errors: No known data errors
Any ideas how to correct this and is it of concern?
Regards,
David Koski
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
https://openindiana.org/mailman/listinfo/openindiana-discuss
