https://openindiana.org/pipermail/openindiana-discuss/2016-September/019602.html
AS wrote: > ntfs /dev/rdsk/c4t0d0p0 /mtn Well, that's clear that you could not mount p0. In Solaris x86 p0 represents the entire disk (similar to s2 on SPARC-Solaris). rmformat lists devices by their all-at-once pseudo-partition p0. Clearly you have to adapt that path before mounting. You were on the right way: Fdisk shows the following: Partition Status Type Start End Length % ========= ====== ============ ===== === ====== === 1 Active IFS: NTFS 1 3890 3890 100 But although FDISK correctly showed that the ntfs is on partition p1, you despite this wanted to mount p0. BTW the next error you might have received with this command (if specifying a valid partition) would probably be mount: /mtn: No such file or directory Independently of that all the exFAT stuff I wrote generally applies to Hipster versus modern SDHX cards formatted in modern DSLR cameras, like this Sandisk Extreme Pro 128GB when formatted in a FullFrame Nikon: https://www.bueromarkt-ag.de/sd-karte_sandisk_128_gb_extreme_pro,p-sd-128sdep,l-google-prd,pd-b2c.html >Понедельник, 26 сентября 2016, 13:25 UTC от Apostolos Syropoulos via >openindiana-discuss <openindiana-discuss@openindiana.org>: > >> >> I feel this way of identifying a partition as rather dangerous. >> > > > >After your suggestions, I have used the following command: > ># ntfs-3g /dev/dsk/c4t0d0p1 /mnt > >The command worked! Thank you. > > >A.S. >---------------------- >Apostolos Syropoulos >Xanthi, Greece > >_______________________________________________ >openindiana-discuss mailing list >openindiana-discuss@openindiana.org >https://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ openindiana-discuss mailing list openindiana-discuss@openindiana.org https://openindiana.org/mailman/listinfo/openindiana-discuss
