Thank you for you answer. So I was hoping that it'll work.
I intend to use a cache/log device. That's why I'll use the speediest
sata port. The cheap SSD didn't work my old PC.
Under 2 weeks I had an error on it. The "scrub" showed me. I don't want
to deal with any disk error.
Intel 3500/3700 SSD is too expensive for me. Anyway thanks again.
BR
Brogyi
2014.11.04. 7:41 keltezéssel, Nikola M. írta:
On 11/ 3/14 07:55 PM, Brogyányi József wrote:
Hi
I'd like to add a SSD to my pool but I need to move the rpool mirror.
I have sata2 and sata3 ports. Of course rpool mirror occupied the
sata3 ports.
Do I need to issue any command before I move the rpool mirror?
I'll try to start only one rpool drive on the new port then switch it
off when it's working. Add the second drive to rpool and I'll waiting
for the miracle when it boot again.
Is it working for me or I have to build up again the mirror?
BR
Brogyi
ZFS does not care at what port disks are pugged in and in what order.
If multiple pools are using more disks they would all be found and
working on any ooperating system with ZFS support (definition is on
disks themselves and not in the OS)
Only thing is to choose on motherboard where to boot from.
When one adds second disk/partition to rpool, it is added as mirror
and that's it.
As I understand you wanted to migrate rpool to SSD and then when it is
done, to switch off HD and continue using SSD as rpool. Don't see why
not it would work just like that.
One can also use SSDs as caching device for larger pools, but that's
another topic.
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
