I have a Dell PowerVault TL2000 tape library which I'd like to connect directly
to our OpenIndiana server. The drives on the TL2000 are connected via SAS and
show show up under /dev/rmt/, but I'm not sure how to add the Tape changer.
# mt -f /dev/rmt/0 status
IBM ULT3580-HH4 tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
# mt -f /dev/rmt/0 config
"IBM ULT3580-HH4", "IBM ULT3580-HH4 ", "CFGIBMULT3580HH4";
CFGIBMULT3580HH4 =
2,0x3B,0,0x1018619,4,0x44,0x44,0x46,0x46,3,60,1920,780,19980,1020,1020,19200;
Do I need to modify /kernel/drv/sgen.conf and add a changer? I tried to use
add_drv as the sgen.conf file suggests, but sgen was already in use (even
though everything is commented out in the sgen.conf file).
# add_drv -i "'IBM ULT3580-HH4' 'IBM ULT3580-HH4 '
'CFGIBMULT3580HH4'" sgen
("sgen") already in use as a driver or alias.
Is there something I'm missing? Thank you for your help,
-Kurt
________________________________
This message contains information that may be confidential, privileged or
otherwise protected by law from disclosure. It is intended for the exclusive
use of the Addressee(s). Unless you are the addressee or authorized agent of
the addressee, you may not review, copy, distribute or disclose to anyone the
message or any information contained within. If you have received this message
in error, please contact the sender by electronic reply to
em...@environcorp.com and immediately delete all copies of the message.
_______________________________________________
openindiana-discuss mailing list
openindiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss
