How did you recreate the LU's? It's been a bit since I was doing anything with LUN's (I can't recall if I tested volume migration/rollback w/vmware); but my personal documentation has a note for recreating volumes using stmfadm instead of sbdadm; specifically :
stmfadm create-lu -p guid=*LUN GUID* /dev/rdsk/*pathtozvol* for re-creating an LU; and only use sbdadm for creating new lu's. -Lucas Van Tol > Date: Fri, 5 Apr 2013 10:23:52 -0500 > From: cooper...@gmail.com > To: openindiana-discuss@openindiana.org > Subject: [OpenIndiana-discuss] FC LUN to ESXi 5.1 Not Recognized After > Migration > > Hello, > > I recently migrated two COMSTAR LUs with zvol backs across pools on the > same OI host with 'zfs send -R snap | zfs recv -d pool'. On the new pool, > I re-created the SBD LUs with the appropriate zvols and added views with > the pre-existing host groups and target group. ESXi sees both FC devices > and recognizes them as containing VMFS5 filesystems, but the datastores are > nowhere to be found. Digging into the syslog on the ESXi host, the > following lines are repeated each time ESXi rescans its storage adapters > for new devices or filesystems: > > 2013-04-05T14:49:09.930Z cpu10:9018)VC: 1547: Device rescan time 22 msec > (total number of devices 5) > 2013-04-05T14:49:09.930Z cpu10:9018)VC: 1550: Filesystem probe time 65 msec > (devices probed 4 of 5) > 2013-04-05T14:49:10.108Z cpu8:9001)LVM: 8315: Device > naa.600144f0c7de06000000515ee22f0004:1 detected to be a snapshot: > 2013-04-05T14:49:10.108Z cpu8:9001)LVM: 8322: queried disk ID: <type 2, > len 22, lun 1, devType 0, scsi 0, h(id) 11042151283195656460> > 2013-04-05T14:49:10.108Z cpu8:9001)LVM: 8329: on-disk disk ID: <type 2, > len 22, lun 5, devType 0, scsi 0, h(id) 7503996913499860076> > 2013-04-05T14:49:10.118Z cpu8:9001)LVM: 8315: Device > naa.600144f0c7de06000000515ee22c0003:1 detected to be a snapshot: > 2013-04-05T14:49:10.118Z cpu8:9001)LVM: 8322: queried disk ID: <type 2, > len 22, lun 0, devType 0, scsi 0, h(id) 6697595845557691291> > 2013-04-05T14:49:10.118Z cpu8:9001)LVM: 8329: on-disk disk ID: <type 2, > len 22, lun 4, devType 0, scsi 0, h(id) 16952771820309103938> > 2013-04-05T14:49:10.146Z cpu8:9001)Vol3: 692: Couldn't read volume header > from control: Not supported > 2013-04-05T14:49:10.146Z cpu8:9001)Vol3: 692: Couldn't read volume header > from control: Not supported > 2013-04-05T14:49:10.146Z cpu8:9001)FSS: 4972: No FS driver claimed device > 'control': Not supported > > The SBD LUs were not created with a snapshot, so I'm not sure what to make > of the 3rd and 6th lines. I did notice the LUN ID varies from the returned > query and expected or on-disk ID in lines 4-5 and 7-8. I tried using views > LUN 4 and 5 as well as 0 and 1 reflect the on-disk/queried ID, but the > issue persists. Both the OI and ESXi hosts have been rebooted as well. > > Hopefully someone has some advice for me to get these mounted properly! > > Thanks, > > Cooper > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
