Hi, On čt, 2012-10-25 at 05:05 -0700, John Doe wrote: > Hi, > [...] > Then, for testing, I needed to put some data from an ext3 usb drive on > the raidz2... So I had to first install ext2 support: > pfexec pkgadd -d SFEe2fsprogs.pkg SFElibiconv SFEe2fsprogs > pfexec pkgadd -d SUNWext2fs.pkg SUNWext2fs
from where did you download these packages? > It worked, but the file transfer (rsync -avH) was VERY slow (only 179G in 15 > hours)... It could be. Either USB support or ext2(3)fs is slow in your case. > From the logs: > Oct 24 12:05:49 clust-2 usba: [ID 912658 kern.info] USB 2.0 device > (usb4fc,c15) operating at hi speed (USB 2.x) on USB 2.0 external hub: > storage@1, scsa2usb0 at bus address 5 > Oct 24 12:05:49 clust-2 usba: [ID 349649 kern.info] Sunplus Technology > Inc. USB to Serial-ATA bridge ST2000DL00S2H7J90C602099 > Oct 24 12:05:49 clust-2 genunix: [ID 936769 kern.info] scsa2usb0 is > /pci@0,0/pci15d9,62f@1d/hub@1/storage@1 > Oct 24 12:05:49 clust-2 genunix: [ID 408114 kern.info] > /pci@0,0/pci15d9,62f@1d/hub@1/storage@1 (scsa2usb0) online > Oct 24 12:05:49 clust-2 scsi: [ID 583861 kern.info] sd0 at scsa2usb0: target > 0 lun 0 > Oct 24 12:05:49 clust-2 genunix: [ID 936769 kern.info] sd0 is > /pci@0,0/pci15d9,62f@1d/hub@1/storage@1/disk@0,0 > Oct 24 12:05:49 clust-2 genunix: [ID 408114 kern.info] > /pci@0,0/pci15d9,62f@1d/hub@1/storage@1/disk@0,0 (sd0) online > Oct 24 12:09:58 clust-2 ufs: [ID 717476 kern.notice] NOTICE: mount: not a UFS > magic number (0x0) > Oct 24 12:22:07 clust-2 ext2fs: [ID 800345 kern.notice] NOTICE: info: > mount_count=0 > Oct 24 12:22:07 clust-2 ext2fs: [ID 854744 kern.notice] NOTICE: Setting ops, > name=ext2fs > Oct 24 12:22:07 clust-2 ext2fs: [ID 302322 kern.notice] NOTICE: ext2init end > Oct 24 12:22:07 clust-2 ext2fs: [ID 850434 kern.notice] NOTICE: DATAs_033: > 13472722/244203520 files, 487818616/488378000 blocks > Oct 24 12:55:50 clust-2 ext2fs: [ID 118274 kern.notice] NOTICE: ext2_iupdat 2 > Oct 24 12:57:00 clust-2 last message repeated 190 times > Oct 24 12:57:24 clust-2 ext2fs: [ID 118274 kern.notice] NOTICE: ext2_iupdat 2 > Oct 24 13:03:30 clust-2 last message repeated 940 times > Oct 24 13:04:15 clust-2 ext2fs: [ID 118274 kern.notice] NOTICE: ext2_iupdat 2 > Oct 24 13:10:23 clust-2 last message repeated 955 times > Oct 24 13:10:24 clust-2 ext2fs: [ID 118274 kern.notice] NOTICE: ext2_iupdat 2 > Oct 24 13:16:25 clust-2 last message repeated 592 times > ... > Oct 25 03:03:41 clust-2 ext2fs: [ID 118274 kern.notice] NOTICE: ext2_iupdat 2 > Oct 25 03:10:01 clust-2 last message repeated 94 times > > And that stops there at 3am because this morning I had been disconnected > and when I went to the server, there was some kind of "kernel" panic (I > think related to ext2fs) and it said something about dumping zfs stuff and > rebooting... but it got stuck there and never rebooted. > I cannot find the panic message... is it written somewhere or only on the > screen? As root you should write "savecore" and if crashdump was created and is still on the disk, it will be exported to /var/crash/ > Is the ext2fs module stable? > I was using it several times a year ago and it was good enough for me but mostly for ext2 data transfer. Please, contact me off the list and we can look at it. > Thx, > JD > Best regards, Milan _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
