On Windows, I use Xming (it's worked prior to the upgrade) and Ubuntu. I've also just ssh'd from the OpenIndiana host back into itself to try, I remember this worked in the past to test.
The error when launching something like gedit is always: Gtk-WARNING **: cannot open display: localhost:x.0 Where x is the Offset for the session. Echo $DISPLAY returns back the correct information (as far as I know). Sorry for the newb questions, I'm sure this is really easy. Attached are the configs (still unclear what the difference is for ssh_config and sshd_config..) Between changes I've restarted network/ssh and I've also rebooted. I got tired of rebooting and decided to ask for help :) On Sun, Aug 21, 2011 at 10:12 AM, Sriram Narayanan <sri...@belenix.org>wrote: > Sorry, I just realized that you're performing an SSH X11 forwarding, > so xhost+ won't apply. > > -- Sriram > > On Sun, Aug 21, 2011 at 10:41 PM, Sriram Narayanan <sri...@belenix.org> > wrote: > > Some things to check: > > 1. Did you reload sshd after you changed the config file ? > > 2. Did you perform an xhost + ? > > > > -- Sriram > > > > On Sun, Aug 21, 2011 at 10:35 PM, Serge Fonville > > <serge.fonvi...@gmail.com> wrote: > >> Hi, > >> > >> A few questions: > >> Have you looked at the settings in sshd_config. > >> What error do you get > >> What software did you use. > >> > >> Kind regards/met vriendelijke groet, > >> > >> Serge Fonville > >> > >> http://www.sergefonville.nl > >> > >> Convince Google!! > >> They need to add GAL support on Android (star to agree) > >> http://code.google.com/p/android/issues/detail?id=4602 > >> > >> > >> 2011/8/21 Jonathan Leafty <jleafty+openindianadisc...@gmail.com> > >> > >>> I recently upgraded my OpenSolaris b134 install to OI 148 and then 151a > >>> > >>> I can't seem to get X11 Forwarding to work, every attempt ends in: > >>> cannot open display: localhost:10.0 > >>> > >>> It looks like it wasn't enabled after the upgrade in > /etc/ssh/ssh_config so > >>> I enabled it there (plus ForwardX11Trusted). sshd_config has it > enabled. > >>> > >>> I've tried this from a Windows and Ubuntu box, same result > >>> > >>> ssh -v doesn't show anything wrong and I show the OI box listening on > 6010 > >>> (or whatever display offset) > >>> > >>> I'm honestly not sure what to do next. > >>> > >>> -- > >>> Jonathan > >>> _______________________________________________ > >>> OpenIndiana-discuss mailing list > >>> OpenIndiana-discuss@openindiana.org > >>> http://openindiana.org/mailman/listinfo/openindiana-discuss > >>> > >> _______________________________________________ > >> OpenIndiana-discuss mailing list > >> OpenIndiana-discuss@openindiana.org > >> http://openindiana.org/mailman/listinfo/openindiana-discuss > >> > > > > > > > > -- > > Belenix: www.belenix.org > > > > > > -- > Belenix: www.belenix.org > > _______________________________________________ > OpenIndiana-discuss mailing list > OpenIndiana-discuss@openindiana.org > http://openindiana.org/mailman/listinfo/openindiana-discuss >
# Copyright (c) 2001 by Sun Microsystems, Inc. # All rights reserved. # # ident "%Z%%M% %I% %E% SMI" # # This file provides defaults for ssh(1). # The values can be changed in per-user configuration files $HOME/.ssh/config # or on the command line of ssh(1). # Configuration data is parsed as follows: # 1. command line options # 2. user-specific file # 3. system-wide file /etc/ssh/ssh_config # # Any configuration value is only changed the first time it is set. # host-specific definitions should be at the beginning of the # configuration file, and defaults at the end. # Example (matches compiled in defaults): # Host * # ForwardAgent no ForwardX11 yes ForwardX11Trusted yes # PubkeyAuthentication yes # PasswordAuthentication yes # FallBackToRsh no # UseRsh no # BatchMode no # CheckHostIP yes # StrictHostKeyChecking ask # EscapeChar ~
# # Copyright (c) 2001, 2010, Oracle and/or its affiliates. All rights reserved. # # Configuration file for sshd(1m) (see also sshd_config(4)) # # Protocol versions supported # # The sshd shipped in this release of Solaris has support for major versions # 1 and 2. It is recommended due to security weaknesses in the v1 protocol # that sites run only v2 if possible. Support for v1 is provided to help sites # with existing ssh v1 clients/servers to transition. # Support for v1 may not be available in a future release of Solaris. # # To enable support for v1 an RSA1 key must be created with ssh-keygen(1). # RSA and DSA keys for protocol v2 are created by /etc/init.d/sshd if they # do not already exist, RSA1 keys for protocol v1 are not automatically created. # Uncomment ONLY ONE of the following Protocol statements. # Only v2 (recommended) Protocol 2 # Both v1 and v2 (not recommended) #Protocol 2,1 # Only v1 (not recommended) #Protocol 1 # Listen port (the IANA registered port number for ssh is 22) Port 22 # The default listen address is all interfaces, this may need to be changed # if you wish to restrict the interfaces sshd listens on for a multi homed host. # Multiple ListenAddress entries are allowed. # IPv4 only ListenAddress 0.0.0.0 # IPv4 & IPv6 #ListenAddress :: # If port forwarding is enabled (default), specify if the server can bind to # INADDR_ANY. # This allows the local port forwarding to work when connections are received # from any remote host. GatewayPorts no # X11 tunneling options X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost yes # The maximum number of concurrent unauthenticated connections to sshd. # start:rate:full see sshd(1) for more information. # The default is 10 unauthenticated clients. #MaxStartups 10:30:60 # Banner to be printed before authentication starts. #Banner /etc/issue # Should sshd print the /etc/motd file and check for mail. # On Solaris it is assumed that the login shell will do these (eg /etc/profile). PrintMotd no # KeepAlive specifies whether keep alive messages are sent to the client. # See sshd(1) for detailed description of what this means. # Note that the client may also be sending keep alive messages to the server. KeepAlive yes # Syslog facility and level SyslogFacility auth LogLevel info # # Authentication configuration # # Host private key files # Must be on a local disk and readable only by the root user (root:sys 600). HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key # Length of the server key # Default 768, Minimum 512 ServerKeyBits 768 # sshd regenerates the key every KeyRegenerationInterval seconds. # The key is never stored anywhere except the memory of sshd. # The default is 1 hour (3600 seconds). KeyRegenerationInterval 3600 # Ensure secure permissions on users .ssh directory. StrictModes yes # Length of time in seconds before a client that hasn't completed # authentication is disconnected. # Default is 600 seconds. 0 means no time limit. LoginGraceTime 600 # Maximum number of retries for authentication # Default is 6. Default (if unset) for MaxAuthTriesLog is MaxAuthTries / 2 MaxAuthTries 6 MaxAuthTriesLog 3 # Are logins to accounts with empty passwords allowed. # If PermitEmptyPasswords is no, pass PAM_DISALLOW_NULL_AUTHTOK # to pam_authenticate(3PAM). PermitEmptyPasswords no # To disable tunneled clear text passwords, change PasswordAuthentication to no. PasswordAuthentication yes # Are root logins permitted using sshd. # Note that sshd uses pam_authenticate(3PAM) so the root (or any other) user # maybe denied access by a PAM module regardless of this setting. # Valid options are yes, without-password, no. PermitRootLogin no # sftp subsystem Subsystem sftp internal-sftp # SSH protocol v1 specific options # # The following options only apply to the v1 protocol and provide # some form of backwards compatibility with the very weak security # of /usr/bin/rsh. Their use is not recommended and the functionality # will be removed when support for v1 protocol is removed. # Should sshd use .rhosts and .shosts for password less authentication. IgnoreRhosts yes RhostsAuthentication no # Rhosts RSA Authentication # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts. # If the user on the client side is not root then this won't work on # Solaris since /usr/bin/ssh is not installed setuid. RhostsRSAAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication. #IgnoreUserKnownHosts yes # Is pure RSA authentication allowed. # Default is yes RSAAuthentication yes
_______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
