Hi Michelle, please have a look at the bug id and the thread. Seems not to be supported.
On the other hand it may be possible that there is a proprietary driver for SOL 10x86 out there. Additionally go into your the BIOS options and set the SATA controller mode to AHCI, hopefullly the device will be detected properly. But now clue if it works, regardingt the driver issue. :-( devfsadm -Cv or reconfigure reboot reboot -- -r ----------------- cfgadm -al enable them the targets and device names will be different... cfgadm -xsata_port_activate sata1/2 Activate the port: /devices/pci@0,0/pci1025,183@1f,2:2 This operation will enable activity on the SATA port Continue (yes/no)? y cfgadm -c configure sata1/2 cfgadm -al sata1/2::dsk/c9t2d0 disk connected configured ok Am 20.01.11 17:07, schrieb Michelle Knight: > Hi Folks, > > In my effort to save money, I bought a PCIe card that gave me two reasonably > fast e-sata ports. > > I've got a feeling that OI can't see the card and therefore won't use it. Am > I > right? Is there anything I can do about this? > > The chipset is Marvell 9128 > http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6967157 http://opensolaris.org/jive/thread.jspa?messageID=491082 Good luck and fingers crossed. _.-|-/\-._ \-' '-. / /\ /\ \/ \/ < . > ./. \/ _ / < > /___\ |. .< \ / < /\ > ( #) |#) | | < /\ -. __\ \ < < V > )./_._(\ .)/\ < < .- / \_'_) )-.. \ < ./ / > > /._./ /\ < '-' > > / '-._ < v > _.-' / '-.______.ยท' \ \/ *********************************************************** *This message has been scanned by DrWeb AV and Spamassassin _______________________________________________ OpenIndiana-discuss mailing list OpenIndiana-discuss@openindiana.org http://openindiana.org/mailman/listinfo/openindiana-discuss
