On 22/11/10 01:44 PM, Harry Putnam wrote:
Is there some way to determine the size of disks discovered with
`format'

An attempt to create a 2 disk mirror failed with the message that the
disks were different sizes, but I thought they were the same size... I
must have used the wrong identifier for one of the disks... so to find
the matching disk how can I tell what size the discs turned up by
format are?



$ pfexec format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c3t4d0 <ATA    -ST3320620AS    -D    cyl 38910 alt 2 hd 255 sec 63>
          /p...@0,0/pci10de,3...@a/pci1000,3...@0/s...@4,0
       1. c3t6d0 <ATA    -ST3320620AS    -K    cyl 38910 alt 2 hd 255 sec 63>
          /p...@0,0/pci10de,3...@a/pci1000,3...@0/s...@6,0
       2. c5t5000C500204C9482d0 <ATA    -ST31000528AS   -CC38 cyl 60797 alt 2 hd 
255 sec 126>
          /scsi_vhci/d...@g5000c500204c9482
       3. c5t5000C500205E77DBd0 <ATA    -ST31000528AS   -CC38 cyl 60797 alt 2 hd 
255 sec 126>
          /scsi_vhci/d...@g5000c500205e77db
       4. c5t5000CCA35DE9C580d0 <ATA    -Hitachi HDS7210-A3EA cyl 60797 alt 2 hd 
255 sec 126>
          /scsi_vhci/d...@g5000cca35de9c580
       5. c5t5000CCA35DEA1ED5d0 <ATA    -Hitachi HDS7210-A3EA cyl 60797 alt 2 hd 
255 sec 126>
          /scsi_vhci/d...@g5000cca35dea1ed5
       6. c5t5000CCA00510A7CCd0 <HITACHI-HUS1514SBSUN146-SA02 cyl 17826 alt 2 hd 
255 sec 63>
          /scsi_vhci/d...@g5000cca00510a7cc
       7. c5t50024E90037AF38Cd0 <ATA    -SAMSUNG HD103SJ-0001 cyl 60797 alt 2 hd 
255 sec 126>
          /scsi_vhci/d...@g50024e90037af38c
       8. c5t50024E90037AF390d0 <ATA    -SAMSUNG HD103SJ-0001 cyl 60797 alt 2 hd 
255 sec 126>
          /scsi_vhci/d...@g50024e90037af390
       9. c6t0d0 <drive type unknown>
          /p...@0,0/pci108e,6...@2,1/h...@6/h...@1/stor...@1/d...@0,0
      10. c6t0d1 <drive type unknown>
          /p...@0,0/pci108e,6...@2,1/h...@6/h...@1/stor...@1/d...@0,1



It's mostly the cylinder numbers that you need to watch out for.
If you have devices with the same claimed manufacturer size but
different geometry, I'd create a slice of the maximum size on the
smaller disk, then create a slice with the same number of cylinders
on the larger disk, and then mirror those two slices.


McB


_______________________________________________
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss

Reply via email to