Hi, I had exactly the same experience as Alexandre describes. Only by going the partial delivery route could I ship the order.
Allow me an additional comment: for the lot numbers to be assigned on a *FIFO* basis, one (or at least: I) would expect the system to assign the oldest lot number of the article to be picked on the corresponding pick list. However, as far as I can see it in the current trunk-wms, the assignment of lot numbers is still manual, so operators will need to guess the oldest article. Or maybe my expectations in this regard are different, so let me ask: how do you foresee to have FIFO working in v8? Of course a lot of congrats for the added functionality and big leap forwards in terms of wms capabilities! I look forward to test it further. best regards, Wouter Tebbens On 01/13/2014 11:50 AM, Alexandre Fayolle wrote: > Hello, > > I'm having issues with production lot management in the new WMS, but > maybe this is because I've missed something. > > To reproduce: > > 1. enable production lot / SN management in the wms configuration > 2. enable multiple WH and locations in the wms configuration > 3. configure the CARD product with full production lot tracking > 4. configure the main WH with 2 step delivery > > Then > 5. create and confirm a Sale of 5 CARD for Luc Maurer > 6. display the internal picking > > issues: > > a. display the internal picking, check availability (should be ok on a > fresh db), click "Transfer Done" : an error message is displayed saying > SN are required for CARD. Yet there is no way I can find to provide that > information. > > b. click "Partial Transfer", then Edit. In the Quantities Done section, > it is possible to provide information about SN. But there is no "split" > button, enabling me to create 5 lines with qty 1 and different SN for > the CARDS. > > c. For the sake of the test, create in the Quantities Done section 2 > lines with qty 1 and SN 001 and 002 respectively. Click on "create draft > backorder" (not sure if this is required). Click Transfer Done. Display > the Out picking related to the sale order. I'm expecting to see the SN > propagated from the internal picking to the outgoing picking, but it is > not the case. What I get is a move with qty 2 (available) and a move > with qty 3 (waiting availability), which means I have to enter the SN > again to be able to process the picking. > > _______________________________________________ Mailing list: https://launchpad.net/~openerp-community Post to : openerp-community@lists.launchpad.net Unsubscribe : https://launchpad.net/~openerp-community More help : https://help.launchpad.net/ListHelp
