ping
-----Original Message-----
From: Zheng, Ruoqin/郑 若钦
Sent: Monday, January 23, 2017 10:41 AM
To: openembedded-core@lists.openembedded.org
Cc: Zheng, Ruoqin/郑 若钦 <zhengrq.f...@cn.fujitsu.com>
Subject: [OE-core] [PATCH] busybox: 1.24.1 -> 1.26.2
1) Upgrade busybox from 1.24.1 to 1.26.2
2) Delete 12 patches below, since they are integrated upstream.
busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch
busybox/0001-libiproute-handle-table-ids-larger-than-255.patch
busybox/0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch
busybox/CVE-2016-2147.patch
busybox/CVE-2016-2147_2.patch
busybox/CVE-2016-2148.patch
busybox/busybox-1.24.1-truncate-open-mode.patch
busybox/busybox-1.24.1-unzip-regression.patch
busybox/busybox-1.24.1-unzip.patch
busybox/busybox-kbuild-race-fix-commit-d8e61bb.patch
busybox/commit-applet_tables-fix-commit-0dddbc1.patch
busybox/ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch
3) Modify 3 patches below to make it compatible with new version
busybox/busybox-cross-menuconfig.patch
busybox/busybox-udhcpc-no_deconfig.patch
busybox/makefile-fix-backport.patch
Signed-off-by: Zheng Ruoqin <zhengrq.f...@cn.fujitsu.com>
---
...e-the-behaviour-of-c-parameter-to-match-u.patch | 73 -----------
...biproute-handle-table-ids-larger-than-255.patch | 134 -------------------
...-n-flushes-pattern-space-terminates-early.patch | 72 -----------
.../busybox/busybox/CVE-2016-2147.patch | 57 --------
.../busybox/busybox/CVE-2016-2147_2.patch | 32 -----
.../busybox/busybox/CVE-2016-2148.patch | 74 -----------
.../busybox-1.24.1-truncate-open-mode.patch | 81 ------------
.../busybox/busybox-1.24.1-unzip-regression.patch | 143 ---------------------
.../busybox/busybox/busybox-1.24.1-unzip.patch | 118 -----------------
.../busybox/busybox/busybox-cross-menuconfig.patch | 70 +++++-----
.../busybox-kbuild-race-fix-commit-d8e61bb.patch | 53 --------
.../busybox/busybox-udhcpc-no_deconfig.patch | 70 +++++-----
.../commit-applet_tables-fix-commit-0dddbc1.patch | 61 ---------
...lem_on_mips64_n64_big_endian_musl_systems.patch | 90 -------------
.../busybox/busybox/makefile-fix-backport.patch | 30 ++---
.../{busybox_1.24.1.bb => busybox_1.26.2.bb} | 16 +--
16 files changed, 88 insertions(+), 1086 deletions(-)
delete mode 100644
meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch
delete mode 100644
meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch
delete mode 100644
meta/recipes-core/busybox/busybox/0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch
delete mode 100644 meta/recipes-core/busybox/busybox/CVE-2016-2147.patch
delete mode 100644 meta/recipes-core/busybox/busybox/CVE-2016-2147_2.patch
delete mode 100644 meta/recipes-core/busybox/busybox/CVE-2016-2148.patch
delete mode 100644
meta/recipes-core/busybox/busybox/busybox-1.24.1-truncate-open-mode.patch
delete mode 100644
meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip-regression.patch
delete mode 100644 meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip.patch
delete mode 100644
meta/recipes-core/busybox/busybox/busybox-kbuild-race-fix-commit-d8e61bb.patch
delete mode 100644
meta/recipes-core/busybox/busybox/commit-applet_tables-fix-commit-0dddbc1.patch
delete mode 100644
meta/recipes-core/busybox/busybox/ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch
rename meta/recipes-core/busybox/{busybox_1.24.1.bb => busybox_1.26.2.bb} (66%)
diff --git
a/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch
b/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch
deleted file mode 100644
index 8bcbd73..0000000
---
a/meta/recipes-core/busybox/busybox/0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 198f18addf1d814c2fefcb492f3b9fbd221669bb Mon Sep 17 00:00:00 2001
-From: "Maxin B. John" <maxin.j...@intel.com>
-Date: Wed, 20 Apr 2016 18:24:45 +0300
-Subject: [PATCH] flock: update the behaviour of -c parameter to match upstream
-
-In upstream, -c 'PROG ARGS' means "run sh -c 'PROG ARGS'"
-
-function old new delta
-flock_main 286 377 +91
-.rodata 155849 155890 +41
-
-Upstream-Status: Submitted
-[ http://lists.busybox.net/pipermail/busybox/2016-April/084142.html ]
-
-Signed-off-by: Maxin B. John <maxin.j...@intel.com>
----
- util-linux/flock.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
-diff --git a/util-linux/flock.c b/util-linux/flock.c
-index 05a747f..c85a25d 100644
---- a/util-linux/flock.c
-+++ b/util-linux/flock.c
-@@ -20,6 +20,7 @@ int flock_main(int argc, char **argv)
MAIN_EXTERNALLY_VISIBLE;
- int flock_main(int argc UNUSED_PARAM, char **argv)
- {
- int mode, opt, fd;
-+ char *cmd_args[4];
- enum {
- OPT_s = (1 << 0),
- OPT_x = (1 << 1),
-@@ -57,7 +58,6 @@ int flock_main(int argc UNUSED_PARAM, char **argv)
- /* If it is "flock FILE -c PROG", then -c isn't caught by getopt32:
- * we use "+" in order to support "flock -opt FILE PROG -with-opts",
- * we need to remove -c by hand.
-- * TODO: in upstream, -c 'PROG ARGS' means "run sh -c 'PROG ARGS'"
- */
- if (argv[0]
- && argv[0][0] == '-'
-@@ -65,7 +65,10 @@ int flock_main(int argc UNUSED_PARAM, char **argv)
- || (ENABLE_LONG_OPTS && strcmp(argv[0] + 1, "-command") == 0)
- )
- ) {
-- argv++;
-+ if (argc != optind + 3)
-+ bb_error_msg_and_die("-c requires exactly one command argument");
-+ else
-+ argv++;
- }
-
- if (OPT_s == LOCK_SH && OPT_x == LOCK_EX && OPT_n == LOCK_NB && OPT_u
== LOCK_UN) {
-@@ -89,9 +92,14 @@ int flock_main(int argc UNUSED_PARAM, char **argv)
- return EXIT_FAILURE;
- bb_perror_nomsg_and_die();
- }
--
-- if (argv[0])
-- return spawn_and_wait(argv);
--
-+ if (argv[0]) {
-+ cmd_args[0] = getenv("SHELL");
-+ if (!cmd_args[0])
-+ cmd_args[0] = (char*)DEFAULT_SHELL;
-+ cmd_args[1] = (char*)"-c";
-+ cmd_args[2] = argv[0];
-+ cmd_args[3] = NULL;
-+ return spawn_and_wait(cmd_args);
-+ }
- return EXIT_SUCCESS;
- }
---
-2.4.0
-
diff --git
a/meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch
b/meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch
deleted file mode 100644
index aac5b40..0000000
---
a/meta/recipes-core/busybox/busybox/0001-libiproute-handle-table-ids-larger-than-255.patch
+++ /dev/null
@@ -1,134 +0,0 @@
-From b5a9234272e6084557224c73ab7737ed47f09848 Mon Sep 17 00:00:00 2001
-From: Lukasz Nowak <lno...@tycoint.com>
-Date: Wed, 23 Nov 2016 12:48:21 +0000
-Subject: [PATCH v2] libiproute: handle table ids larger than 255
-
-Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values.
-In order to preserve compatibility, the old 8-bit field: rtm_table is still
-in use when table id is lower than 256.
-
-Add support for the 32-bit table id (RTA_TABLE attribute) in:
-- ip route print
-- ip route modify
-- ip rule print
-- ip rule modify
-
-Add printing of table ids to ip route.
-
-Changes are compatible with the mainline iproute2 utilities.
-
-These changes are required for compatibility with ConnMan, which by default
-uses table ids greater than 255.
-
-Upstream-Status: Submitted
[http://lists.busybox.net/pipermail/busybox/2016-December/084989.html]
-
-Signed-off-by: Lukasz Nowak <lno...@tycoint.com>
----
- networking/libiproute/iproute.c | 24 ++++++++++++++++++++----
- networking/libiproute/iprule.c | 11 +++++++++--
- 2 files changed, 29 insertions(+), 6 deletions(-)
-
-diff --git a/networking/libiproute/iproute.c b/networking/libiproute/iproute.c
-index 6ecd5f7..d5af498 100644
---- a/networking/libiproute/iproute.c
-+++ b/networking/libiproute/iproute.c
-@@ -87,6 +87,7 @@ static int FAST_FUNC print_route(const struct sockaddr_nl
*who UNUSED_PARAM,
- inet_prefix dst;
- inet_prefix src;
- int host_len = -1;
-+ uint32_t tid;
-
- if (n->nlmsg_type != RTM_NEWROUTE && n->nlmsg_type != RTM_DELROUTE) {
- fprintf(stderr, "Not a route: %08x %08x %08x\n",
-@@ -99,6 +100,14 @@ static int FAST_FUNC print_route(const struct sockaddr_nl
*who UNUSED_PARAM,
- if (len < 0)
- bb_error_msg_and_die("wrong nlmsg len %d", len);
-
-+ memset(tb, 0, sizeof(tb));
-+ parse_rtattr(tb, RTA_MAX, RTM_RTA(r), len);
-+
-+ if (tb[RTA_TABLE])
-+ tid = *(uint32_t *)RTA_DATA(tb[RTA_TABLE]);
-+ else
-+ tid = r->rtm_table;
-+
- if (r->rtm_family == AF_INET6)
- host_len = 128;
- else if (r->rtm_family == AF_INET)
-@@ -128,7 +137,7 @@ static int FAST_FUNC print_route(const struct sockaddr_nl
*who UNUSED_PARAM,
- }
- }
- } else {
-- if (G_filter.tb > 0 && G_filter.tb != r->rtm_table) {
-+ if (G_filter.tb > 0 && G_filter.tb != tid) {
- return 0;
- }
- }
-@@ -157,10 +166,8 @@ static int FAST_FUNC print_route(const struct sockaddr_nl
*who UNUSED_PARAM,
- return 0;
- }
-
-- memset(tb, 0, sizeof(tb));
- memset(&src, 0, sizeof(src));
- memset(&dst, 0, sizeof(dst));
-- parse_rtattr(tb, RTA_MAX, RTM_RTA(r), len);
-
- if (tb[RTA_SRC]) {
- src.bitlen = r->rtm_src_len;
-@@ -283,6 +290,10 @@ static int FAST_FUNC print_route(const struct sockaddr_nl
*who UNUSED_PARAM,
- if (tb[RTA_OIF]) {
- printf("dev %s ",
ll_index_to_name(*(int*)RTA_DATA(tb[RTA_OIF])));
- }
-+#if ENABLE_FEATURE_IP_RULE
-+ if (tid && tid != RT_TABLE_MAIN && !G_filter.tb)
-+ printf("table %s ", rtnl_rttable_n2a(tid));
-+#endif
-
- /* Todo: parse & show "proto kernel", "scope link" here */
-
-@@ -434,7 +445,12 @@ IF_FEATURE_IP_RULE(ARG_table,)
- NEXT_ARG();
- if (rtnl_rttable_a2n(&tid, *argv))
- invarg(*argv, "table");
-- req.r.rtm_table = tid;
-+ if (tid < 256)
-+ req.r.rtm_table = tid;
-+ else {
-+ req.r.rtm_table = RT_TABLE_UNSPEC;
-+ addattr32(&req.n, sizeof(req), RTA_TABLE, tid);
-+ }
- #endif
- } else if (arg == ARG_dev || arg == ARG_oif) {
- NEXT_ARG();
-diff --git a/networking/libiproute/iprule.c b/networking/libiproute/iprule.c
-index 774a3e2..3fac7c5 100644
---- a/networking/libiproute/iprule.c
-+++ b/networking/libiproute/iprule.c
-@@ -119,7 +119,9 @@ static int FAST_FUNC print_rule(const struct sockaddr_nl
*who UNUSED_PARAM,
- printf("iif %s ", (char*)RTA_DATA(tb[RTA_IIF]));
- }
-
-- if (r->rtm_table)
-+ if (tb[RTA_TABLE])
-+ printf("lookup %s ",
rtnl_rttable_n2a(*(uint32_t*)RTA_DATA(tb[RTA_TABLE])));
-+ else if (r->rtm_table)
- printf("lookup %s ", rtnl_rttable_n2a(r->rtm_table));
-
- if (tb[RTA_FLOW]) {
-@@ -259,7 +261,12 @@ static int iprule_modify(int cmd, char **argv)
- NEXT_ARG();
- if (rtnl_rttable_a2n(&tid, *argv))
- invarg(*argv, "table ID");
-- req.r.rtm_table = tid;
-+ if (tid < 256)
-+ req.r.rtm_table = tid;
-+ else {
-+ req.r.rtm_table = RT_TABLE_UNSPEC;
-+ addattr32(&req.n, sizeof(req), RTA_TABLE, tid);
-+ }
- table_ok = 1;
- } else if (key == ARG_dev ||
- key == ARG_iif
---
-2.7.4
-
diff --git
a/meta/recipes-core/busybox/busybox/0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch
b/meta/recipes-core/busybox/busybox/0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch
deleted file mode 100644
index 4f53984..0000000
---
a/meta/recipes-core/busybox/busybox/0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From 903542f7331c58007a3ef938d41e1c55fc329648 Mon Sep 17 00:00:00 2001
-From: Dengke Du <dengke...@windriver.com>
-Date: Wed, 31 Aug 2016 23:40:43 -0400
-Subject: [PATCH] sed: fix "sed n (flushes pattern space, terminates early)"
- testcase failure
-
-This patch fix "sed n (flushes pattern space, terminates early)"
-testcase failure. We can see it at:
-
-
https://git.busybox.net/busybox/commit/?id=76d72376e0244a5cafd4880cdc623e37d86a75e4
-
-Upstream-Status: Backport
-
-Signed-off-by: Dengke Du <dengke...@windriver.com>
----
- editors/sed.c | 19 ++++++++++---------
- testsuite/sed.tests | 6 +-----
- 2 files changed, 11 insertions(+), 14 deletions(-)
-
-diff --git a/editors/sed.c b/editors/sed.c
-index 7bbf820..259c39c 100644
---- a/editors/sed.c
-+++ b/editors/sed.c
-@@ -1274,16 +1274,17 @@ static void process_files(void)
- case 'n':
- if (!G.be_quiet)
- sed_puts(pattern_space, last_gets_char);
-- if (next_line) {
-- free(pattern_space);
-- pattern_space = next_line;
-- last_gets_char = next_gets_char;
-- next_line = get_next_line(&next_gets_char,
&last_puts_char, last_gets_char);
-- substituted = 0;
-- linenum++;
-- break;
-+ if (next_line == NULL) {
-+ /* If no next line, jump to end of script and
exit. */
-+ goto discard_line;
- }
-- /* fall through */
-+ free(pattern_space);
-+ pattern_space = next_line;
-+ last_gets_char = next_gets_char;
-+ next_line = get_next_line(&next_gets_char,
&last_puts_char, last_gets_char);
-+ substituted = 0;
-+ linenum++;
-+ break;
-
- /* Quit. End of script, end of input. */
- case 'q':
-diff --git a/testsuite/sed.tests b/testsuite/sed.tests
-index 34479e5..96ff7a5 100755
---- a/testsuite/sed.tests
-+++ b/testsuite/sed.tests
-@@ -73,13 +73,9 @@ testing "sed t (test/branch clears test bit)" "sed -e
's/a/b/;:loop;t loop'" \
- testing "sed T (!test/branch)" "sed -e 's/a/1/;T notone;p;: notone;p'" \
- "1\n1\n1\nb\nb\nc\nc\n" "" "a\nb\nc\n"
-
--test x"$SKIP_KNOWN_BUGS" = x"" && {
--# Normal sed end-of-script doesn't print "c" because n flushed the pattern
--# space. If n hits EOF, pattern space is empty when script ends.
--# Query: how does this interact with no newline at EOF?
- testing "sed n (flushes pattern space, terminates early)" "sed -e 'n;p'" \
- "a\nb\nb\nc\n" "" "a\nb\nc\n"
--}
-+
- # non-GNU sed: N does _not_ flush pattern space, therefore c is eaten @
script end
- # GNU sed: N flushes pattern space, therefore c is printed too @ script end
- testing "sed N (flushes pattern space (GNU behavior))" "sed -e 'N;p'" \
---
-2.8.1
-
diff --git a/meta/recipes-core/busybox/busybox/CVE-2016-2147.patch
b/meta/recipes-core/busybox/busybox/CVE-2016-2147.patch
deleted file mode 100644
index 84cae6a..0000000
--- a/meta/recipes-core/busybox/busybox/CVE-2016-2147.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From d474ffc68290e0a83651c4432eeabfa62cd51e87 Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Thu, 10 Mar 2016 11:47:58 +0100
-Subject: [PATCH] udhcp: fix a SEGV on malformed RFC1035-encoded domain name
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-
-Upstream-Status: Backport
-CVE: CVE-2016-2147
-
-https://git.busybox.net/busybox/commit/?id=d474ffc
-Signed-off-by: Armin Kuster <akus...@mvista.com>
-
----
- networking/udhcp/domain_codec.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
-Index: busybox-1.23.2/networking/udhcp/domain_codec.c
-===================================================================
---- busybox-1.23.2.orig/networking/udhcp/domain_codec.c
-+++ busybox-1.23.2/networking/udhcp/domain_codec.c
-@@ -63,11 +63,10 @@ char* FAST_FUNC dname_dec(const uint8_t
- if (crtpos + *c + 1 > clen) /* label too long?
abort */
- return NULL;
- if (dst)
-- memcpy(dst + len, c + 1, *c);
-+ /* \3com ---> "com." */
-+ ((char*)mempcpy(dst + len, c + 1,
*c))[0] = '.';
- len += *c + 1;
- crtpos += *c + 1;
-- if (dst)
-- dst[len - 1] = '.';
- } else {
- /* NUL: end of current domain name */
- if (retpos == 0) {
-@@ -78,7 +77,10 @@ char* FAST_FUNC dname_dec(const uint8_t
- crtpos = retpos;
- retpos = depth = 0;
- }
-- if (dst)
-+ if (dst && len != 0)
-+ /* \4host\3com\0\4host and we are at \0:
-+ * \3com was converted to "com.",
change dot to space.
-+ */
- dst[len - 1] = ' ';
- }
-
-@@ -228,6 +230,9 @@ int main(int argc, char **argv)
- int len;
- uint8_t *encoded;
-
-+ uint8_t str[6] = { 0x00, 0x00, 0x02, 0x65, 0x65, 0x00 };
-+ printf("NUL:'%s'\n", dname_dec(str, 6, ""));
-+
- #define DNAME_DEC(encoded,pre) dname_dec((uint8_t*)(encoded),
sizeof(encoded), (pre))
- printf("'%s'\n", DNAME_DEC("\4host\3com\0", "test1:"));
- printf("test2:'%s'\n", DNAME_DEC("\4host\3com\0\4host\3com\0", ""));
diff --git a/meta/recipes-core/busybox/busybox/CVE-2016-2147_2.patch
b/meta/recipes-core/busybox/busybox/CVE-2016-2147_2.patch
deleted file mode 100644
index 1473d46..0000000
--- a/meta/recipes-core/busybox/busybox/CVE-2016-2147_2.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 1b7c17391de66502dd7a97c866e0a33681edbb1f Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Fri, 11 Mar 2016 00:26:58 +0100
-Subject: [PATCH] udhcpc: fix a warning in debug code
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-Upsteam-Status: Backport
-CVE: CVE-2016-2147 regression fix
-
-https://git.busybox.net/busybox/commit/?id=1b7c17
-
-Signed-off-by: Armin Kuster <akus...@mvista.com>
-
----
- networking/udhcp/domain_codec.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/networking/udhcp/domain_codec.c b/networking/udhcp/domain_codec.c
-index cee31f1..5a923cc 100644
---- a/networking/udhcp/domain_codec.c
-+++ b/networking/udhcp/domain_codec.c
-@@ -7,6 +7,7 @@
- * Licensed under GPLv2 or later, see file LICENSE in this source tree.
- */
- #ifdef DNS_COMPR_TESTING
-+# define _GNU_SOURCE
- # define FAST_FUNC /* nothing */
- # define xmalloc malloc
- # include <stdlib.h>
---
-2.3.5
-
diff --git a/meta/recipes-core/busybox/busybox/CVE-2016-2148.patch
b/meta/recipes-core/busybox/busybox/CVE-2016-2148.patch
deleted file mode 100644
index af04a7f..0000000
--- a/meta/recipes-core/busybox/busybox/CVE-2016-2148.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 352f79acbd759c14399e39baef21fc4ffe180ac2 Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Fri, 26 Feb 2016 15:54:56 +0100
-Subject: [PATCH] udhcpc: fix OPTION_6RD parsing (could overflow its malloced
- buffer)
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-
-Upstream-Status: Backport
-CVE: CVE-2016-2148
-https://git.busybox.net/busybox/commit/?id=352f79
-
-Signed-off-by: Armin Kuster <akus...@mvista.com>
-
----
- networking/udhcp/common.c | 15 +++++++++++++--
- networking/udhcp/dhcpc.c | 4 ++--
- 2 files changed, 15 insertions(+), 4 deletions(-)
-
-Index: busybox-1.23.2/networking/udhcp/common.c
-===================================================================
---- busybox-1.23.2.orig/networking/udhcp/common.c
-+++ busybox-1.23.2/networking/udhcp/common.c
-@@ -142,7 +142,7 @@ const char dhcp_option_strings[] ALIGN1
- * udhcp_str2optset: to determine how many bytes to allocate.
- * xmalloc_optname_optval: to estimate string length
- * from binary option length: (option[LEN] / dhcp_option_lengths[opt_type])
-- * is the number of elements, multiply in by one element's string width
-+ * is the number of elements, multiply it by one element's string width
- * (len_of_option_as_string[opt_type]) and you know how wide string you need.
- */
- const uint8_t dhcp_option_lengths[] ALIGN1 = {
-@@ -162,7 +162,18 @@ const uint8_t dhcp_option_lengths[] ALIG
- [OPTION_S32] = 4,
- /* Just like OPTION_STRING, we use minimum length here */
- [OPTION_STATIC_ROUTES] = 5,
-- [OPTION_6RD] = 22, /* ignored by udhcp_str2optset */
-+ [OPTION_6RD] = 12, /* ignored by udhcp_str2optset */
-+ /* The above value was chosen as follows:
-+ * len_of_option_as_string[] for this option is >60: it's a string of
the form
-+ * "32 128 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 255.255.255.255 ".
-+ * Each additional ipv4 address takes 4 bytes in binary option and
appends
-+ * another "255.255.255.255 " 16-byte string. We can set [OPTION_6RD] =
4
-+ * but this severely overestimates string length: instead of 16 bytes,
-+ * it adds >60 for every 4 bytes in binary option.
-+ * We cheat and declare here that option is in units of 12 bytes.
-+ * This adds more than 60 bytes for every three ipv4 addresses - more
than enough.
-+ * (Even 16 instead of 12 should work, but let's be paranoid).
-+ */
- };
-
-
-Index: busybox-1.23.2/networking/udhcp/dhcpc.c
-===================================================================
---- busybox-1.23.2.orig/networking/udhcp/dhcpc.c
-+++ busybox-1.23.2/networking/udhcp/dhcpc.c
-@@ -103,7 +103,7 @@ static const uint8_t len_of_option_as_st
- [OPTION_IP ] = sizeof("255.255.255.255 "),
- [OPTION_IP_PAIR ] = sizeof("255.255.255.255 ") * 2,
- [OPTION_STATIC_ROUTES ] = sizeof("255.255.255.255/32 255.255.255.255
"),
-- [OPTION_6RD ] = sizeof("32 128
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 255.255.255.255 "),
-+ [OPTION_6RD ] = sizeof("132 128
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 255.255.255.255 "),
- [OPTION_STRING ] = 1,
- [OPTION_STRING_HOST ] = 1,
- #if ENABLE_FEATURE_UDHCP_RFC3397
-@@ -214,7 +214,7 @@ static NOINLINE char *xmalloc_optname_op
- type = optflag->flags & OPTION_TYPE_MASK;
- optlen = dhcp_option_lengths[type];
- upper_length = len_of_option_as_string[type]
-- * ((unsigned)(len + optlen - 1) / (unsigned)optlen);
-+ * ((unsigned)(len + optlen) / (unsigned)optlen);
-
- dest = ret = xmalloc(upper_length + strlen(opt_name) + 2);
- dest += sprintf(ret, "%s=", opt_name);
diff --git
a/meta/recipes-core/busybox/busybox/busybox-1.24.1-truncate-open-mode.patch
b/meta/recipes-core/busybox/busybox/busybox-1.24.1-truncate-open-mode.patch
deleted file mode 100644
index cdc9108..0000000
--- a/meta/recipes-core/busybox/busybox/busybox-1.24.1-truncate-open-mode.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-Upstream-Status: Backport
-
- http://busybox.net/downloads/fixes-1.24.1/
-
https://git.busybox.net/busybox/commit/?id=e111a1640494fe87fc913f94fae3bb805de0fc99
-
https://git.busybox.net/busybox/commit/?h=1_24_stable&id=be729c1d3b5c923f10871dd68ea94156d0f8c803
-
-Signed-off-by: Andre McCurdy <armccu...@gmail.com>
-
-From be729c1d3b5c923f10871dd68ea94156d0f8c803 Mon Sep 17 00:00:00 2001
-From: Ari Sundholm <a...@tuxera.com>
-Date: Mon, 4 Jan 2016 15:40:37 +0200
-Subject: [PATCH] truncate: always set mode when opening file to avoid fortify
- errors
-
-Busybox crashes due to no mode being given when opening:
-$ ./busybox truncate -s 1M foo
-*** invalid open64 call: O_CREAT without mode ***: ./busybox terminated
-======= Backtrace: =========
-/lib/x86_64-linux-gnu/libc.so.6(+0x7338f)[0x7f66d921338f]
-/lib/x86_64-linux-gnu/libc.so.6(__fortify_fail+0x5c)[0x7f66d92aac9c]
-/lib/x86_64-linux-gnu/libc.so.6(+0xeb6aa)[0x7f66d928b6aa]
-./busybox[0x4899f9]
-======= Memory map: ========
-00400000-004d0000 r-xp 00000000 00:1a 137559
/home/ari/busybox/busybox
-006cf000-006d0000 r--p 000cf000 00:1a 137559
/home/ari/busybox/busybox
-006d0000-006d1000 rw-p 000d0000 00:1a 137559
/home/ari/busybox/busybox
-006d1000-006d4000 rw-p 00000000 00:00 0
-014e7000-01508000 rw-p 00000000 00:00 0 [heap]
-7f66d8f8a000-7f66d8fa0000 r-xp 00000000 08:07 1579008
/lib/x86_64-linux-gnu/libgcc_s.so.1
-7f66d8fa0000-7f66d919f000 ---p 00016000 08:07 1579008
/lib/x86_64-linux-gnu/libgcc_s.so.1
-7f66d919f000-7f66d91a0000 rw-p 00015000 08:07 1579008
/lib/x86_64-linux-gnu/libgcc_s.so.1
-7f66d91a0000-7f66d935b000 r-xp 00000000 08:07 1578994
/lib/x86_64-linux-gnu/libc-2.19.so
-7f66d935b000-7f66d955a000 ---p 001bb000 08:07 1578994
/lib/x86_64-linux-gnu/libc-2.19.so
-7f66d955a000-7f66d955e000 r--p 001ba000 08:07 1578994
/lib/x86_64-linux-gnu/libc-2.19.so
-7f66d955e000-7f66d9560000 rw-p 001be000 08:07 1578994
/lib/x86_64-linux-gnu/libc-2.19.so
-7f66d9560000-7f66d9565000 rw-p 00000000 00:00 0
-7f66d9565000-7f66d966a000 r-xp 00000000 08:07 1579020
/lib/x86_64-linux-gnu/libm-2.19.so
-7f66d966a000-7f66d9869000 ---p 00105000 08:07 1579020
/lib/x86_64-linux-gnu/libm-2.19.so
-7f66d9869000-7f66d986a000 r--p 00104000 08:07 1579020
/lib/x86_64-linux-gnu/libm-2.19.so
-7f66d986a000-7f66d986b000 rw-p 00105000 08:07 1579020
/lib/x86_64-linux-gnu/libm-2.19.so
-7f66d986b000-7f66d988e000 r-xp 00000000 08:07 1578981
/lib/x86_64-linux-gnu/ld-2.19.so
-7f66d9a64000-7f66d9a67000 rw-p 00000000 00:00 0
-7f66d9a8a000-7f66d9a8d000 rw-p 00000000 00:00 0
-7f66d9a8d000-7f66d9a8e000 r--p 00022000 08:07 1578981
/lib/x86_64-linux-gnu/ld-2.19.so
-7f66d9a8e000-7f66d9a8f000 rw-p 00023000 08:07 1578981
/lib/x86_64-linux-gnu/ld-2.19.so
-7f66d9a8f000-7f66d9a90000 rw-p 00000000 00:00 0
-7ffc47761000-7ffc47782000 rw-p 00000000 00:00 0
[stack]
-7ffc477ab000-7ffc477ad000 r-xp 00000000 00:00 0 [vdso]
-ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0
[vsyscall]
-Aborted (core dumped)
-$
-
-Fix this by simply always setting the mode, as it doesn't hurt even
-when O_CREAT is not specified.
-
-This bug is a regression introduced in fc3e40e, as xopen(), which
-was originally used, would automatically set the mode.
-
-Signed-off-by: Ari Sundholm <a...@tuxera.com>
-Signed-off-by: Mike Frysinger <vap...@gentoo.org>
-(cherry picked from commit e111a1640494fe87fc913f94fae3bb805de0fc99)
----
- coreutils/truncate.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/coreutils/truncate.c b/coreutils/truncate.c
-index e5fa656..4c997bf 100644
---- a/coreutils/truncate.c
-+++ b/coreutils/truncate.c
-@@ -64,7 +64,7 @@ int truncate_main(int argc UNUSED_PARAM, char **argv)
-
- argv += optind;
- while (*argv) {
-- int fd = open(*argv, flags);
-+ int fd = open(*argv, flags, 0666);
- if (fd < 0) {
- if (errno != ENOENT || !(opts & OPT_NOCREATE)) {
- bb_perror_msg("%s: open", *argv);
---
-2.6.2
-
diff --git
a/meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip-regression.patch
b/meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip-regression.patch
deleted file mode 100644
index e3c5020..0000000
--- a/meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip-regression.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-Upstream-Status: Backport
-
- http://busybox.net/downloads/fixes-1.24.1/
-
http://git.busybox.net/busybox/commit/?id=092fabcf1df5d46cd22be4ffcd3b871f6180eb9c
-
http://git.busybox.net/busybox/commit/?h=1_24_stable&id=092fabcf1df5d46cd22be4ffcd3b871f6180eb9c
-
-Signed-off-by: Andre McCurdy <armccu...@gmail.com>
-
-From 092fabcf1df5d46cd22be4ffcd3b871f6180eb9c Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Fri, 30 Oct 2015 23:41:53 +0100
-Subject: [PATCH] [g]unzip: fix recent breakage.
-
-Also, do emit error message we so painstakingly pass from gzip internals
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-(cherry picked from commit 6bd3fff51aa74e2ee2d87887b12182a3b09792ef)
-Signed-off-by: Mike Frysinger <vap...@gentoo.org>
----
- archival/libarchive/decompress_gunzip.c | 33 +++++++++++++++++++++------------
- testsuite/unzip.tests | 1 +
- 2 files changed, 22 insertions(+), 12 deletions(-)
-
-diff --git a/archival/libarchive/decompress_gunzip.c
b/archival/libarchive/decompress_gunzip.c
-index c76fd31..357c9bf 100644
---- a/archival/libarchive/decompress_gunzip.c
-+++ b/archival/libarchive/decompress_gunzip.c
-@@ -309,8 +309,7 @@ static int huft_build(const unsigned *b, const unsigned n,
- huft_t *q; /* points to current table */
- huft_t r; /* table entry for structure assignment */
- huft_t *u[BMAX]; /* table stack */
-- unsigned v[N_MAX]; /* values in order of bit length */
-- unsigned v_end;
-+ unsigned v[N_MAX + 1]; /* values in order of bit length. last v[] is
never used */
- int ws[BMAX + 1]; /* bits decoded stack */
- int w; /* bits decoded */
- unsigned x[BMAX + 1]; /* bit offsets, then code stack */
-@@ -365,15 +364,17 @@ static int huft_build(const unsigned *b, const unsigned
n,
- *xp++ = j;
- }
-
-- /* Make a table of values in order of bit lengths */
-+ /* Make a table of values in order of bit lengths.
-+ * To detect bad input, unused v[i]'s are set to invalid value UINT_MAX.
-+ * In particular, last v[i] is never filled and must not be accessed.
-+ */
-+ memset(v, 0xff, sizeof(v));
- p = b;
- i = 0;
-- v_end = 0;
- do {
- j = *p++;
- if (j != 0) {
- v[x[j]++] = i;
-- v_end = x[j];
- }
- } while (++i < n);
-
-@@ -435,7 +436,9 @@ static int huft_build(const unsigned *b, const unsigned n,
-
- /* set up table entry in r */
- r.b = (unsigned char) (k - w);
-- if (p >= v + v_end) { // Was "if (p >= v + n)" but v[]
can be shorter!
-+ if (/*p >= v + n || -- redundant, caught by the second
check: */
-+ *p == UINT_MAX /* do we access uninited v[i]? (see
memset(v))*/
-+ ) {
- r.e = 99; /* out of values--invalid code */
- } else if (*p < s) {
- r.e = (unsigned char) (*p < 256 ? 16 : 15);
/* 256 is EOB code */
-@@ -520,8 +523,9 @@ static NOINLINE int inflate_codes(STATE_PARAM_ONLY)
- e = t->e;
- if (e > 16)
- do {
-- if (e == 99)
-- abort_unzip(PASS_STATE_ONLY);;
-+ if (e == 99) {
-+ abort_unzip(PASS_STATE_ONLY);
-+ }
- bb >>= t->b;
- k -= t->b;
- e -= 16;
-@@ -557,8 +561,9 @@ static NOINLINE int inflate_codes(STATE_PARAM_ONLY)
- e = t->e;
- if (e > 16)
- do {
-- if (e == 99)
-+ if (e == 99) {
- abort_unzip(PASS_STATE_ONLY);
-+ }
- bb >>= t->b;
- k -= t->b;
- e -= 16;
-@@ -824,8 +829,9 @@ static int inflate_block(STATE_PARAM smallint *e)
-
- b_dynamic >>= 4;
- k_dynamic -= 4;
-- if (nl > 286 || nd > 30)
-+ if (nl > 286 || nd > 30) {
- abort_unzip(PASS_STATE_ONLY); /* bad lengths */
-+ }
-
- /* read in bit-length-code lengths */
- for (j = 0; j < nb; j++) {
-@@ -906,12 +912,14 @@ static int inflate_block(STATE_PARAM smallint *e)
- bl = lbits;
-
- i = huft_build(ll, nl, 257, cplens, cplext, &inflate_codes_tl,
&bl);
-- if (i != 0)
-+ if (i != 0) {
- abort_unzip(PASS_STATE_ONLY);
-+ }
- bd = dbits;
- i = huft_build(ll + nl, nd, 0, cpdist, cpdext,
&inflate_codes_td, &bd);
-- if (i != 0)
-+ if (i != 0) {
- abort_unzip(PASS_STATE_ONLY);
-+ }
-
- /* set up data for inflate_codes() */
- inflate_codes_setup(PASS_STATE bl, bd);
-@@ -999,6 +1007,7 @@ inflate_unzip_internal(STATE_PARAM transformer_state_t
*xstate)
- error_msg = "corrupted data";
- if (setjmp(error_jmp)) {
- /* Error from deep inside zip machinery */
-+ bb_error_msg(error_msg);
- n = -1;
- goto ret;
- }
-diff --git a/testsuite/unzip.tests b/testsuite/unzip.tests
-index ca0a458..d8738a3 100755
---- a/testsuite/unzip.tests
-+++ b/testsuite/unzip.tests
-@@ -34,6 +34,7 @@ rm foo.zip
- testing "unzip (bad archive)" "uudecode; unzip bad.zip 2>&1; echo \$?" \
- "Archive: bad.zip
- inflating: ]3j½r«IK-%Ix
-+unzip: corrupted data
- unzip: inflate error
- 1
- " \
---
-2.6.2
-
diff --git a/meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip.patch
b/meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip.patch
deleted file mode 100644
index 7186726..0000000
--- a/meta/recipes-core/busybox/busybox/busybox-1.24.1-unzip.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-Upstream-Status: Backport
-
- http://busybox.net/downloads/fixes-1.24.1/
-
http://git.busybox.net/busybox/commit/?id=1de25a6e87e0e627aa34298105a3d17c60a1f44e
-
http://git.busybox.net/busybox/commit/?h=1_24_stable&id=6767af17f11144c7cd3cfe9ef799d7f89a78fe65
-
-Signed-off-by: Andre McCurdy <armccu...@gmail.com>
-
-From 1de25a6e87e0e627aa34298105a3d17c60a1f44e Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Mon, 26 Oct 2015 19:33:05 +0100
-Subject: [PATCH] unzip: test for bad archive SEGVing
-
-function old new delta
-huft_build 1296 1300 +4
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
----
- archival/libarchive/decompress_gunzip.c | 11 +++++++----
- testsuite/unzip.tests | 23 ++++++++++++++++++++++-
- 2 files changed, 29 insertions(+), 5 deletions(-)
-
-diff --git a/archival/libarchive/decompress_gunzip.c
b/archival/libarchive/decompress_gunzip.c
-index 7b6f459..30bf451 100644
---- a/archival/libarchive/decompress_gunzip.c
-+++ b/archival/libarchive/decompress_gunzip.c
-@@ -305,11 +305,12 @@ static int huft_build(const unsigned *b, const unsigned
n,
- unsigned i; /* counter, current code */
- unsigned j; /* counter */
- int k; /* number of bits in current code */
-- unsigned *p; /* pointer into c[], b[], or v[] */
-+ const unsigned *p; /* pointer into c[], b[], or v[] */
- huft_t *q; /* points to current table */
- huft_t r; /* table entry for structure assignment */
- huft_t *u[BMAX]; /* table stack */
- unsigned v[N_MAX]; /* values in order of bit length */
-+ unsigned v_end;
- int ws[BMAX + 1]; /* bits decoded stack */
- int w; /* bits decoded */
- unsigned x[BMAX + 1]; /* bit offsets, then code stack */
-@@ -324,7 +325,7 @@ static int huft_build(const unsigned *b, const unsigned n,
-
- /* Generate counts for each bit length */
- memset(c, 0, sizeof(c));
-- p = (unsigned *) b; /* cast allows us to reuse p for pointing to b */
-+ p = b;
- i = n;
- do {
- c[*p]++; /* assume all entries <= BMAX */
-@@ -365,12 +366,14 @@ static int huft_build(const unsigned *b, const unsigned
n,
- }
-
- /* Make a table of values in order of bit lengths */
-- p = (unsigned *) b;
-+ p = b;
- i = 0;
-+ v_end = 0;
- do {
- j = *p++;
- if (j != 0) {
- v[x[j]++] = i;
-+ v_end = x[j];
- }
- } while (++i < n);
-
-@@ -432,7 +435,7 @@ static int huft_build(const unsigned *b, const unsigned n,
-
- /* set up table entry in r */
- r.b = (unsigned char) (k - w);
-- if (p >= v + n) {
-+ if (p >= v + v_end) { // Was "if (p >= v + n)" but v[]
can be shorter!
- r.e = 99; /* out of values--invalid code */
- } else if (*p < s) {
- r.e = (unsigned char) (*p < 256 ? 16 : 15);
/* 256 is EOB code */
-diff --git a/testsuite/unzip.tests b/testsuite/unzip.tests
-index 8677a03..ca0a458 100755
---- a/testsuite/unzip.tests
-+++ b/testsuite/unzip.tests
-@@ -7,7 +7,7 @@
-
- . ./testing.sh
-
--# testing "test name" "options" "expected result" "file input" "stdin"
-+# testing "test name" "commands" "expected result" "file input" "stdin"
- # file input will be file called "input"
- # test can create a file "actual" instead of writing to stdout
-
-@@ -30,6 +30,27 @@ testing "unzip (subdir only)" "unzip -q foo.zip foo/ &&
test -d foo && test ! -f
- rmdir foo
- rm foo.zip
-
-+# File containing some damaged encrypted stream
-+testing "unzip (bad archive)" "uudecode; unzip bad.zip 2>&1; echo \$?" \
-+"Archive: bad.zip
-+ inflating: ]3j½r«IK-%Ix
-+unzip: inflate error
-+1
-+" \
-+"" "\
-+begin-base64 644 bad.zip
-+UEsDBBQAAgkIAAAAIQA5AAAANwAAADwAAAAQAAcAXTNqwr1ywqtJGxJLLSVJ
-+eCkBD0AdKBk8JzQsIj01JC0/ORJQSwMEFAECCAAAAAAhADoAAAAPAAAANgAA
-+AAwAAQASw73Ct1DCokohPXQiNjoUNTUiHRwgLT4WHlBLAQIQABQAAggIAAAA
-+oQA5AAAANwAAADwAAAAQQAcADAAAACwAMgCAAAAAAABdM2rCvXLCq0kbEkst
-+JUl4KQEPQB0oGSY4Cz4QNgEnJSYIPVBLAQIAABQAAggAAAAAIQAqAAAADwAA
-+BDYAAAAMAAEADQAAADIADQAAAEEAAAASw73Ct1DKokohPXQiNzA+FAI1HCcW
-+NzITNFBLBQUKAC4JAA04Cw0EOhZQSwUGAQAABAIAAgCZAAAAeQAAAAIALhM=
-+====
-+"
-+
-+rm *
-+
- # Clean up scratch directory.
-
- cd ..
---
-2.6.2
-
diff --git a/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch
b/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch
index bda8685..9a59001 100644
--- a/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch
+++ b/meta/recipes-core/busybox/busybox/busybox-cross-menuconfig.patch
@@ -1,6 +1,5 @@
-From: Jason Wessel <jason.wes...@windriver.com>
-Date: Sun, 3 Mar 2013 12:31:40 -0600
-Subject: [PATCH] menuconfig,check-lxdiaglog.sh: Allow specification of ncurses
location
+Subject: [PATCH] Date: Sun, 3 Mar 2013 12:31:40 -0600 Subject: [PATCH]
+ menuconfig,check-lxdiaglog.sh: Allow specification of ncurses location
Upstream-Status: Submitted
@@ -29,38 +28,20 @@ compiling and linking against the right headers and
libraries.
Signed-off-by: Jason Wessel <jason.wes...@windriver.com>
cc: Michal Marek <mma...@suse.cz>
cc: linux-kbu...@vger.kernel.org
+
+Updated to Busybox 1.26.2
+
+Signed-off-by: Zheng Ruoqin <zhengrq.f...@cn.fujitsu.com>
---
- scripts/kconfig/lxdialog/Makefile | 2 +-
- scripts/kconfig/lxdialog/check-lxdialog.sh | 8 ++++++++
+ scripts/kconfig/lxdialog/Makefile | 2 +-
+ scripts/kconfig/lxdialog/check-lxdialog.sh | 8 ++++++++
2 files changed, 9 insertions(+), 1 deletion(-)
---- a/scripts/kconfig/lxdialog/check-lxdialog.sh
-+++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
-@@ -4,6 +4,10 @@
- # What library to link
- ldflags()
- {
-+ if [ x"$CROSS_CURSES_LIB" != x ]; then
-+ echo "$CROSS_CURSES_LIB"
-+ exit
-+ fi
- for ext in so a dylib ; do
- for lib in ncursesw ncurses curses ; do
- $cc -print-file-name=lib${lib}.${ext} | grep -q /
-@@ -19,6 +23,10 @@ ldflags()
- # Where is ncurses.h?
- ccflags()
- {
-+ if [ x"$CROSS_CURSES_INC" != x ]; then
-+ echo "$CROSS_CURSES_INC"
-+ exit
-+ fi
- if [ -f /usr/include/ncursesw/ncurses.h ]; then
- echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncurses.h>"'
- elif [ -f /usr/include/ncursesw/curses.h ]; then
+diff --git a/scripts/kconfig/lxdialog/Makefile
b/scripts/kconfig/lxdialog/Makefile
+index 2c9dc48..cdb4413 100644
--- a/scripts/kconfig/lxdialog/Makefile
+++ b/scripts/kconfig/lxdialog/Makefile
-@@ -5,7 +5,7 @@ check-lxdialog := $(srctree)/$(src)/che
+@@ -5,7 +5,7 @@ check-lxdialog := $(srctree)/$(src)/check-lxdialog.sh
# Use reursively expanded variables so we do not call gcc unless
# we really need to do so. (Do not call gcc as part of make mrproper)
@@ -69,3 +50,32 @@ cc: linux-kbu...@vger.kernel.org
HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags
$(HOSTCC))
HOST_EXTRACFLAGS += -DLOCALE
+diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh
b/scripts/kconfig/lxdialog/check-lxdialog.sh
+index 5075ebf..46266cb 100755
+--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
++++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
+@@ -6,6 +6,10 @@ ldflags()
+ {
+ pkg-config --libs ncursesw 2>/dev/null && exit
+ pkg-config --libs ncurses 2>/dev/null && exit
++ if [ x"$CROSS_CURSES_LIB" != x ]; then
++ echo "$CROSS_CURSES_LIB"
++ exit
++ fi
+ for ext in so a dll.a dylib ; do
+ for lib in ncursesw ncurses curses ; do
+ $cc -print-file-name=lib${lib}.${ext} | grep -q /
+@@ -21,6 +25,10 @@ ldflags()
+ # Where is ncurses.h?
+ ccflags()
+ {
++ if [ x"$CROSS_CURSES_INC" != x ]; then
++ echo "$CROSS_CURSES_INC"
++ exit
++ fi
+ if pkg-config --cflags ncursesw 2>/dev/null; then
+ echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1'
+ elif pkg-config --cflags ncurses 2>/dev/null; then
+--
+2.7.4
+
diff --git
a/meta/recipes-core/busybox/busybox/busybox-kbuild-race-fix-commit-d8e61bb.patch
b/meta/recipes-core/busybox/busybox/busybox-kbuild-race-fix-commit-d8e61bb.patch
deleted file mode 100644
index 38302e0..0000000
---
a/meta/recipes-core/busybox/busybox/busybox-kbuild-race-fix-commit-d8e61bb.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-Upstream-Status: Backport
-
-Patch addressing a parallel make race in Busybox
-
-
http://git.busybox.net/busybox/commit/?id=d8e61bbf13d0cf38d477255cfd5dc71c5d51d575
-
-Signed-off-by: Juro Bystricky <juro.bystri...@intel.com>
-
-From d8e61bbf13d0cf38d477255cfd5dc71c5d51d575 Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Sun, 21 Aug 2016 22:00:20 +0200
-Subject: build system: different fix for
- include/applet_tables.h/include/NUM_APPLETS.h
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-
-diff --git a/applets/Kbuild.src b/applets/Kbuild.src
-index 5cc1827..3aedbbf 100644
---- a/applets/Kbuild.src
-+++ b/applets/Kbuild.src
-@@ -29,7 +29,7 @@ applets/applets.o: include/usage_compressed.h
include/applet_tables.h
-
- applets/applet_tables: .config include/applets.h
- applets/usage: .config include/applets.h
--applets/usage_pod: .config include/applets.h include/applet_tables.h
include/NUM_APPLETS.h
-+applets/usage_pod: .config include/applets.h include/applet_tables.h
-
- quiet_cmd_gen_usage_compressed = GEN include/usage_compressed.h
- cmd_gen_usage_compressed = $(srctree_slash)applets/usage_compressed
include/usage_compressed.h applets
-@@ -37,8 +37,21 @@ quiet_cmd_gen_usage_compressed = GEN
include/usage_compressed.h
- include/usage_compressed.h: applets/usage
$(srctree_slash)applets/usage_compressed
- $(call cmd,gen_usage_compressed)
-
--quiet_cmd_gen_applet_tables = GEN include/applet_tables.h
-+quiet_cmd_gen_applet_tables = GEN include/applet_tables.h
include/NUM_APPLETS.h
- cmd_gen_applet_tables = applets/applet_tables include/applet_tables.h
include/NUM_APPLETS.h
-
--include/applet_tables.h include/NUM_APPLETS.h: applets/applet_tables
-+include/NUM_APPLETS.h: applets/applet_tables
-+ $(call cmd,gen_applet_tables)
-+
-+# In fact, include/applet_tables.h depends only on applets/applet_tables,
-+# and is generated by it. But specifying only it can run
-+# applets/applet_tables twice, possibly in parallel.
-+# We say that it also needs NUM_APPLETS.h
-+#
-+# Unfortunately, we need to list the same command,
-+# and it can be executed twice (sequentially).
-+# The alternative is to not list any command,
-+# and then if include/applet_tables.h is deleted, it won't be rebuilt.
-+#
-+include/applet_tables.h: include/NUM_APPLETS.h applets/applet_tables
- $(call cmd,gen_applet_tables)
diff --git a/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch
b/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch
index 4c9ce3b..202e086 100644
--- a/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch
+++ b/meta/recipes-core/busybox/busybox/busybox-udhcpc-no_deconfig.patch
@@ -1,6 +1,3 @@
-From 53626cd06a3ef05ed847daea802ef0aa9661caa7 Mon Sep 17 00:00:00 2001
-From: Anders Darander <and...@chargestorm.se>
-Date: Thu, 3 Nov 2011 08:51:31 +0100
Subject: [PATCH] busybox-udhcpc-no_deconfig.patch
Upstream-Status: Pending
@@ -27,17 +24,21 @@ Signed-off-by: Anders Darander <and...@chargestorm.se>
Fixed options -b, -a and -P.
Signed-off-by: Andreas Oberritter <o...@opendreambox.org>
+
+Updated to Busybox 1.26.2
+
+Signed-off-by: Zheng Ruoqin <zhengrq.f...@cn.fujitsu.com>
---
- networking/udhcp/dhcpc.c | 29 +++++++++++++++++++++--------
- 1 files changed, 21 insertions(+), 8 deletions(-)
+ networking/udhcp/dhcpc.c | 26 +++++++++++++++++++-------
+ 1 file changed, 19 insertions(+), 7 deletions(-)
-Index: busybox-1.20.2/networking/udhcp/dhcpc.c
-===================================================================
---- busybox-1.20.2.orig/networking/udhcp/dhcpc.c
-+++ busybox-1.20.2/networking/udhcp/dhcpc.c
-@@ -29,6 +29,9 @@
- #include <netpacket/packet.h>
- #include <linux/filter.h>
+diff --git a/networking/udhcp/dhcpc.c b/networking/udhcp/dhcpc.c
+index 0e23626..2f05ee3 100644
+--- a/networking/udhcp/dhcpc.c
++++ b/networking/udhcp/dhcpc.c
+@@ -50,6 +50,9 @@ struct tpacket_auxdata {
+ #endif
+
+/* option whether to down the interface when reconfiguring */
+static int allow_deconfig = 1;
@@ -45,7 +46,7 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
/* "struct client_config_t client_config" is in bb_common_bufsiz1 */
-@@ -81,8 +84,9 @@ enum {
+@@ -102,8 +105,9 @@ enum {
OPT_x = 1 << 18,
OPT_f = 1 << 19,
OPT_B = 1 << 20,
@@ -56,7 +57,7 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
USE_FOR_MMU( OPTBIT_b,)
IF_FEATURE_UDHCPC_ARPING(OPTBIT_a,)
IF_FEATURE_UDHCP_PORT( OPTBIT_P,)
-@@ -1040,7 +1044,8 @@ static void perform_renew(void)
+@@ -1108,7 +1112,8 @@ static void perform_renew(void)
state = RENEW_REQUESTED;
break;
case RENEW_REQUESTED: /* impatient are we? fine, square 1 */
@@ -66,26 +67,16 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
case REQUESTING:
case RELEASED:
change_listen_mode(LISTEN_RAW);
-@@ -1064,7 +1069,8 @@ static void perform_release(uint32_t ser
- bb_info_msg("Unicasting a release of %s to %s",
- inet_ntoa(temp_addr), buffer);
- send_release(server_addr, requested_ip); /* unicast */
-- udhcp_run_script(NULL, "deconfig");
-+ if (allow_deconfig)
-+ udhcp_run_script(NULL, "deconfig");
- }
- bb_info_msg("Entering released state");
-
-@@ -1215,7 +1221,7 @@ int udhcpc_main(int argc UNUSED_PARAM, c
+@@ -1298,7 +1303,7 @@ int udhcpc_main(int argc UNUSED_PARAM, char **argv)
/* O,x: list; -T,-t,-A take numeric param */
- opt_complementary = "O::x::T+:t+:A+" IF_UDHCP_VERBOSE(":vv") ;
+ IF_UDHCP_VERBOSE(opt_complementary = "vv";)
IF_LONG_OPTS(applet_long_options = udhcpc_longopts;)
-- opt = getopt32(argv, "CV:H:h:F:i:np:qRr:s:T:t:SA:O:ox:fB"
-+ opt = getopt32(argv, "CV:H:h:F:i:np:qRr:s:T:t:SA:O:ox:fBD"
+- opt = getopt32(argv, "CV:H:h:F:i:np:qRr:s:T:+t:+SA:+O:*ox:*fB"
++ opt = getopt32(argv, "CV:H:h:F:i:np:qRr:s:T:t:SA:O:ox:fBD"
USE_FOR_MMU("b")
- IF_FEATURE_UDHCPC_ARPING("a")
+ IF_FEATURE_UDHCPC_ARPING("a::")
IF_FEATURE_UDHCP_PORT("P:")
-@@ -1316,6 +1322,9 @@ int udhcpc_main(int argc UNUSED_PARAM, c
+@@ -1407,6 +1412,9 @@ int udhcpc_main(int argc UNUSED_PARAM, char **argv)
logmode |= LOGMODE_SYSLOG;
}
@@ -95,7 +86,7 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
/* Make sure fd 0,1,2 are open */
bb_sanitize_stdio();
/* Equivalent of doing a fflush after every \n */
-@@ -1330,7 +1339,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c
+@@ -1421,7 +1429,8 @@ int udhcpc_main(int argc UNUSED_PARAM, char **argv)
srand(monotonic_us());
state = INIT_SELECTING;
@@ -105,17 +96,17 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
change_listen_mode(LISTEN_RAW);
packet_num = 0;
timeout = 0;
-@@ -1484,7 +1494,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c
+@@ -1575,7 +1584,8 @@ int udhcpc_main(int argc UNUSED_PARAM, char **argv)
}
/* Timed out, enter init state */
- bb_info_msg("Lease lost, entering init state");
+ bb_error_msg("lease lost, entering init state");
- udhcp_run_script(NULL, "deconfig");
-+ if (allow_deconfig)
-+ udhcp_run_script(NULL, "deconfig");
++ if (allow_deconfig)
++ udhcp_run_script(NULL, "deconfig");
state = INIT_SELECTING;
client_config.first_secs = 0; /* make secs
field count from 0 */
/*timeout = 0; - already is */
-@@ -1667,7 +1678,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c
+@@ -1768,7 +1778,8 @@ int udhcpc_main(int argc UNUSED_PARAM, char **argv)
send_decline(/*xid,*/
server_addr, packet.yiaddr);
if (state != REQUESTING)
@@ -125,8 +116,8 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
change_listen_mode(LISTEN_RAW);
state = INIT_SELECTING;
client_config.first_secs = 0;
/* make secs field count from 0 */
-@@ -1711,7 +1723,8 @@ int udhcpc_main(int argc UNUSED_PARAM, c
- bb_info_msg("Received DHCP NAK");
+@@ -1838,7 +1849,8 @@ int udhcpc_main(int argc UNUSED_PARAM, char **argv)
+ bb_error_msg("received %s", "DHCP NAK");
udhcp_run_script(&packet, "nak");
if (state != REQUESTING)
- udhcp_run_script(NULL, "deconfig");
@@ -135,3 +126,6 @@ Index: busybox-1.20.2/networking/udhcp/dhcpc.c
change_listen_mode(LISTEN_RAW);
sleep(3); /* avoid excessive network traffic */
state = INIT_SELECTING;
+--
+2.7.4
+
diff --git
a/meta/recipes-core/busybox/busybox/commit-applet_tables-fix-commit-0dddbc1.patch
b/meta/recipes-core/busybox/busybox/commit-applet_tables-fix-commit-0dddbc1.patch
deleted file mode 100644
index 7f80a1d..0000000
---
a/meta/recipes-core/busybox/busybox/commit-applet_tables-fix-commit-0dddbc1.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-Upstream-Status: Backport
-
-Patch addressing a parallel make race in Busybox
-
-
http://git.busybox.net/busybox/commit/?id=0dddbc1a59795a77679d8c5ef48a2795cb470563
-
-Signed-off-by: Juro Bystricky <juro.bystri...@intel.com>
-
-From 0dddbc1a59795a77679d8c5ef48a2795cb470563 Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Tue, 23 Aug 2016 20:21:36 +0200
-Subject: build system: always rewrite NUM_APPLETS.h
-
-Conditional rewrite can keep NUM_APPLETS.h mtime old,
-this causes make to try to regenerate it at every invocation.
-
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-
-diff --git a/applets/applet_tables.c b/applets/applet_tables.c
-index 8401a15..ef911a4 100644
---- a/applets/applet_tables.c
-+++ b/applets/applet_tables.c
-@@ -192,27 +192,28 @@ int main(int argc, char **argv)
- printf("};\n");
- #endif
- //printf("#endif /* SKIP_definitions */\n");
-+
- // printf("\n");
- // printf("#define MAX_APPLET_NAME_LEN %u\n", MAX_APPLET_NAME_LEN);
-
- if (argv[2]) {
-- char line_old[80];
-- char line_new[80];
- FILE *fp;
-+ char line_new[80];
-+// char line_old[80];
-
-- line_old[0] = 0;
-- fp = fopen(argv[2], "r");
-- if (fp) {
-- fgets(line_old, sizeof(line_old), fp);
-- fclose(fp);
-- }
- sprintf(line_new, "#define NUM_APPLETS %u\n", NUM_APPLETS);
-- if (strcmp(line_old, line_new) != 0) {
-+// line_old[0] = 0;
-+// fp = fopen(argv[2], "r");
-+// if (fp) {
-+// fgets(line_old, sizeof(line_old), fp);
-+// fclose(fp);
-+// }
-+// if (strcmp(line_old, line_new) != 0) {
- fp = fopen(argv[2], "w");
- if (!fp)
- return 1;
- fputs(line_new, fp);
-- }
-+// }
- }
-
- return 0;
diff --git
a/meta/recipes-core/busybox/busybox/ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch
b/meta/recipes-core/busybox/busybox/ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch
deleted file mode 100644
index 41c5656..0000000
---
a/meta/recipes-core/busybox/busybox/ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 4ab372d49a6e82b0bf097dedb96d26330c5f2d5f Mon Sep 17 00:00:00 2001
-From: Szabolcs Nagy <n...@port70.net>
-Date: Sun, 24 Apr 2016 17:39:02 +0200
-Subject: [PATCH] ip: fix problem on mips64 n64 big endian musl systems
-
-Use designated initializers for struct msghdr.
-The struct layout is non-portable and musl libc does not match what busybox
expects.
-
-Signed-off-by: Szabolcs Nagy <n...@port70.net>
-Tested-by: Waldemar Brodkorb <w...@openadk.org>
-Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
-
-Upstream-Status: Backport
-
-https://git.busybox.net/busybox/commit/?id=4ab372d49a6e82b0bf097dedb96d26330c5f2d5f
-
-Signed-off-by: Armin Kuster <akus...@mvista.com>
-
----
- networking/libiproute/libnetlink.c | 37 ++++++++++++++++++++++++-------------
- 1 file changed, 24 insertions(+), 13 deletions(-)
-
-diff --git a/networking/libiproute/libnetlink.c
b/networking/libiproute/libnetlink.c
-index c7533a4..cbb5daf 100644
---- a/networking/libiproute/libnetlink.c
-+++ b/networking/libiproute/libnetlink.c
-@@ -71,11 +71,15 @@ int FAST_FUNC rtnl_dump_request(struct rtnl_handle *rth,
int type, void *req, in
- struct nlmsghdr nlh;
- struct sockaddr_nl nladdr;
- struct iovec iov[2] = { { &nlh, sizeof(nlh) }, { req, len } };
-+ /* Use designated initializers, struct layout is non-portable */
- struct msghdr msg = {
-- (void*)&nladdr, sizeof(nladdr),
-- iov, 2,
-- NULL, 0,
-- 0
-+ .msg_name = (void*)&nladdr,
-+ .msg_namelen = sizeof(nladdr),
-+ .msg_iov = iov,
-+ .msg_iovlen = 2,
-+ .msg_control = NULL,
-+ .msg_controllen = 0,
-+ .msg_flags = 0
- };
-
- memset(&nladdr, 0, sizeof(nladdr));
-@@ -104,12 +108,15 @@ static int rtnl_dump_filter(struct rtnl_handle *rth,
- while (1) {
- int status;
- struct nlmsghdr *h;
--
-+ /* Use designated initializers, struct layout is non-portable */
- struct msghdr msg = {
-- (void*)&nladdr, sizeof(nladdr),
-- &iov, 1,
-- NULL, 0,
-- 0
-+ .msg_name = (void*)&nladdr,
-+ .msg_namelen = sizeof(nladdr),
-+ .msg_iov = &iov,
-+ .msg_iovlen = 1,
-+ .msg_control = NULL,
-+ .msg_controllen = 0,
-+ .msg_flags = 0
- };
-
- status = recvmsg(rth->fd, &msg, 0);
-@@ -211,11 +218,15 @@ int FAST_FUNC rtnl_talk(struct rtnl_handle *rtnl, struct
nlmsghdr *n,
- struct sockaddr_nl nladdr;
- struct iovec iov = { (void*)n, n->nlmsg_len };
- char *buf = xmalloc(8*1024); /* avoid big stack buffer */
-+ /* Use designated initializers, struct layout is non-portable */
- struct msghdr msg = {
-- (void*)&nladdr, sizeof(nladdr),
-- &iov, 1,
-- NULL, 0,
-- 0
-+ .msg_name = (void*)&nladdr,
-+ .msg_namelen = sizeof(nladdr),
-+ .msg_iov = &iov,
-+ .msg_iovlen = 1,
-+ .msg_control = NULL,
-+ .msg_controllen = 0,
-+ .msg_flags = 0
- };
-
- memset(&nladdr, 0, sizeof(nladdr));
---
-2.3.5
-
diff --git a/meta/recipes-core/busybox/busybox/makefile-fix-backport.patch
b/meta/recipes-core/busybox/busybox/makefile-fix-backport.patch
index 2e9842e..bc28df8 100644
--- a/meta/recipes-core/busybox/busybox/makefile-fix-backport.patch
+++ b/meta/recipes-core/busybox/busybox/makefile-fix-backport.patch
@@ -1,40 +1,38 @@
-From 9e5820a86277818c2f83c11c2aa76d7f0a38283e Mon Sep 17 00:00:00 2001
-From: Denys Vlasenko <vda.li...@googlemail.com>
-Date: Sun, 14 Aug 2016 02:54:27 +0200
-Subject: build system: fix include/NUM_APPLETS.h generation
+Subject: [PATCH] build system: fix include/NUM_APPLETS.h generation
TBH, it's more like "work around my bad makefile-fu" than "fix"...
Signed-off-by: Denys Vlasenko <vda.li...@googlemail.com>
----
- applets/Kbuild.src | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-Upstream-Status: Backport
+Updated to Busybox 1.26.2
+
+Signed-off-by: Zheng Ruoqin <zhengrq.f...@cn.fujitsu.com>
+---
+ applets/Kbuild.src | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/applets/Kbuild.src b/applets/Kbuild.src
-index b612399..5cc1827 100644
+index 3aedbbf..d39b663 100644
--- a/applets/Kbuild.src
+++ b/applets/Kbuild.src
@@ -29,7 +29,7 @@ applets/applets.o: include/usage_compressed.h
include/applet_tables.h
applets/applet_tables: .config include/applets.h
applets/usage: .config include/applets.h
--applets/usage_pod: .config include/applet_tables.h include/applets.h
+-applets/usage_pod: .config include/applets.h include/applet_tables.h
+applets/usage_pod: .config include/applets.h include/applet_tables.h
include/NUM_APPLETS.h
quiet_cmd_gen_usage_compressed = GEN include/usage_compressed.h
cmd_gen_usage_compressed = $(srctree_slash)applets/usage_compressed
include/usage_compressed.h applets
-@@ -40,8 +40,5 @@ include/usage_compressed.h: applets/usage
$(srctree_slash)applets/usage_compress
- quiet_cmd_gen_applet_tables = GEN include/applet_tables.h
+@@ -40,7 +40,7 @@ include/usage_compressed.h: applets/usage
$(srctree_slash)applets/usage_compress
+ quiet_cmd_gen_applet_tables = GEN include/applet_tables.h
include/NUM_APPLETS.h
cmd_gen_applet_tables = applets/applet_tables include/applet_tables.h
include/NUM_APPLETS.h
--include/applet_tables.h: applets/applet_tables
-- $(call cmd,gen_applet_tables)
--
-include/NUM_APPLETS.h: applets/applet_tables
+include/applet_tables.h include/NUM_APPLETS.h: applets/applet_tables
$(call cmd,gen_applet_tables)
+
+ # In fact, include/applet_tables.h depends only on applets/applet_tables,
--
-cgit v0.12
+2.7.4
diff --git a/meta/recipes-core/busybox/busybox_1.24.1.bb
b/meta/recipes-core/busybox/busybox_1.26.2.bb
similarity index 66%
rename from meta/recipes-core/busybox/busybox_1.24.1.bb
rename to meta/recipes-core/busybox/busybox_1.26.2.bb
index afb69d1..130f513 100644
--- a/meta/recipes-core/busybox/busybox_1.24.1.bb
+++ b/meta/recipes-core/busybox/busybox_1.26.2.bb
@@ -29,10 +29,6 @@ SRC_URI =
"http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
file://recognize_connmand.patch \
file://busybox-cross-menuconfig.patch \
file://0001-Use-CC-when-linking-instead-of-LD-and-use-CFLAGS-and.patch \
- file://busybox-1.24.1-unzip.patch \
- file://busybox-1.24.1-unzip-regression.patch \
- file://busybox-1.24.1-truncate-open-mode.patch \
-
file://0001-flock-update-the-behaviour-of-c-parameter-to-match-u.patch \
file://mount-via-label.cfg \
file://sha1sum.cfg \
file://sha256sum.cfg \
@@ -44,18 +40,10 @@ SRC_URI =
"http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
file://rcS \
file://rcK \
file://runlevel \
- file://CVE-2016-2148.patch \
- file://CVE-2016-2147.patch \
- file://CVE-2016-2147_2.patch \
- file://ip_fix_problem_on_mips64_n64_big_endian_musl_systems.patch \
file://makefile-fix-backport.patch \
-
file://0001-sed-fix-sed-n-flushes-pattern-space-terminates-early.patch \
- file://busybox-kbuild-race-fix-commit-d8e61bb.patch \
- file://commit-applet_tables-fix-commit-0dddbc1.patch \
file://makefile-libbb-race.patch \
- file://0001-libiproute-handle-table-ids-larger-than-255.patch \
"
SRC_URI_append_libc-musl = " file://musl.cfg "
-SRC_URI[tarball.md5sum] = "be98a40cadf84ce2d6b05fa41a275c6a"
-SRC_URI[tarball.sha256sum] =
"37d03132cc078937360b392170b7a1d0e5b322eee9f57c0b82292a8b1f0afe3d"
+SRC_URI[tarball.md5sum] = "bb59d25ee2643db20f212eec539429f1"
+SRC_URI[tarball.sha256sum] =
"da3e44913fc1a9c9b7c5337ea5292da518683cbff32be630777f565d6036af16"
--
2.7.4
--
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
