Status update. I was able to reproduce the issue and I have added a configure check to see if the compiler supports the atomic operations or not. RPM will then configure itself to use them if available.
I also disabled the blake tests which were causing issues in some parallel builds. Finally I found an issue where a specific dependency (internal to the package) was not being properly determined by RPM. I'm currently investigating this. --Mark On 2/27/16 5:26 PM, Mark Hatle wrote: > On 2/27/16 4:47 PM, Burton, Ross wrote: >> >> On 27 February 2016 at 04:26, Mark Hatle <mark.ha...@windriver.com >> <mailto:mark.ha...@windriver.com>> wrote: >> >> I am not getting this error on qemux86. >> >> My build configuration: >> >> BB_VERSION = "1.29.0" >> BUILD_SYS = "x86_64-linux" >> NATIVELSBSTRING = "Fedora-23" >> TARGET_SYS = "i586-oe-linux" >> MACHINE = "qemux86" >> DISTRO = "nodistro" >> DISTRO_VERSION = "nodistro.0" >> TUNE_FEATURES = "m32 i586" >> TARGET_FPU = "" >> meta = >> "mhatle/rpm-5.4.16:004efb3aaa973dba030847c1c8218238f0cc68c5" >> >> The local.conf is the stock one with buildhistory and package_rpm >> enabled. >> >> Which compiler do you have enabled? I'm building with the default 5.3.0 >> compiler. >> >> Since I'm not reproducing the problem, I'd like to know what the >> difference in >> configurations is. >> >> >> This was on the autobuilder and happened twice in rpm-native: >> >> http://errors.yoctoproject.org/Errors/Details/38006/ (Debian 8.3) >> http://errors.yoctoproject.org/Errors/Details/38000/ (Ubuntu 14.04) >> >> I guess the -native bit is important there. > > Ok.. so that is different. It means the host compiler is too old and doesn't > support atomic transactions. > >> Also, another failure happened more globally: >> >> gcc: error: tblake2bp.o: No such file or directory >> >> Several times in rpm for target: >> http://errors.yoctoproject.org/Errors/Details/37991/ >> http://errors.yoctoproject.org/Errors/Details/38001/ >> http://errors.yoctoproject.org/Errors/Details/38007/ >> http://errors.yoctoproject.org/Errors/Details/38004/ > > Ok. I'll investigate this one as well. Likely this is a parallel build issue, > hopefully I can spot the fault. > > --Mark > >> And once in rpm-native: >> http://errors.yoctoproject.org/Errors/Details/37995/ >> >> Ross > -- _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core
