On Wednesday, January 13, 2016 at 05:49:08 AM, Khem Raj wrote:
> On Tue, Jan 12, 2016 at 7:36 PM, Marek Vasut <ma...@denx.de> wrote:
> > Upgrade U-Boot to latest version and drop upstreamed patches.
> > 
> > Repair configuration of U-Boot during build. It is no longer
> > possible to run "make foomachine" in U-Boot. Instead, it is
> > necessary to do "make foomachine_defconfig ; make". Fix this
> > in u-boot.inc and u-boot-fw-utils*.bb .
> > 
> > Signed-off-by: Marek Vasut <ma...@denx.de>
> > Cc: Otavio Salvador <ota...@ossystems.com.br>
> > Cc: Ross Burton <ross.bur...@intel.com>
> > Cc: Richard Purdie <richard.pur...@linuxfoundation.org>
> > ---
> > 
> >  meta/recipes-bsp/u-boot/u-boot-fw-utils_2015.10.bb |   49 -
> >  meta/recipes-bsp/u-boot/u-boot-fw-utils_2016.01.bb |   49 +
> >  meta/recipes-bsp/u-boot/u-boot-mkimage_2015.10.bb  |   32 -
> >  meta/recipes-bsp/u-boot/u-boot-mkimage_2016.01.bb  |   32 +
> 
> can you make git work hard to detect renames so its easier to review it ?
> 
> git format -C

I usually use git format-patch -M -C, but didn't do it this time.
I can do a repost if needed.

btw. do you have any other comment about this patch? It'd be nice if you
could snip out of the irrelevant part(s) of the patch so it's easier to
find the relevant comments.

> >  meta/recipes-bsp/u-boot/u-boot.inc                 |    4 +-
> >  ...-u-boot-.lds-remove-_GLOBAL_OFFSET_TABLE_.patch |  185 ---
> >  ...-non-Android-booting-with-ramdisk-and-or-.patch |   36 -
> >  ...board_f-enable-setup_board_part1-for-MIPS.patch |   59 -
> >  ...PS-bootm-rework-and-fix-broken-bootm-code.patch |  254 -----
> >  ...PS-bootm-use-CONFIG_IS_ENABLED-everywhere.patch |   93 --
> >  ...-Replace-extern-inline-with-static-inline.patch | 1184
> >  -------------------- meta/recipes-bsp/u-boot/u-boot_2015.10.bb         

[...]

Best regards,
Marek Vasut
-- 
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core

Reply via email to