This patch adds support for generating a kernel fitImage, which is
a a successor to the uImage format. Unlike uImage, which could only
contain the kernel image itself, the fitImage can contain all kinds
of artifacts, like the kernel image, device tree blobs, initramfs
images, binary firmwares etc. Furthermore, the fitImage supports
different kinds of checksums, not only CRC32 like the uImage did.
Last, but not least, fitImage supports signatures such that either
the whole image or it's parts can be signed and then in turn can
be verified by the bootloader.
So far we only add support for wrapping the kernel image and DTB
into the fitImage. The fitImage uses the sha1 checksum, which is
the default.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
meta/classes/kernel.bbclass | 189 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 186 insertions(+), 3 deletions(-)
diff --git a/meta/classes/kernel.bbclass b/meta/classes/kernel.bbclass
index b23e2e0..d0faab3 100644
--- a/meta/classes/kernel.bbclass
+++ b/meta/classes/kernel.bbclass
@@ -13,16 +13,20 @@ INITRAMFS_IMAGE_BUNDLE ?= ""
python __anonymous () {
kerneltype = d.getVar('KERNEL_IMAGETYPE', True) or ''
- if kerneltype == 'uImage':
+ if kerneltype == 'uImage' or kerneltype == 'fitImage':
depends = d.getVar("DEPENDS", True)
depends = "%s u-boot-mkimage-native" % depends
d.setVar("DEPENDS", depends)
- d.setVar("KERNEL_IMAGETYPE_FOR_MAKE", re.sub(r'\.[^\.]$', '', kerneltype))
+ if kerneltype == 'fitImage':
+ d.setVar("KERNEL_IMAGETYPE_FOR_MAKE", "zImage")
+ else:
+ d.setVar("KERNEL_IMAGETYPE_FOR_MAKE", re.sub(r'\.[^\.]$', '',
kerneltype))
image = d.getVar('INITRAMFS_IMAGE', True)
if image:
d.appendVarFlag('do_bundle_initramfs', 'depends', '
${INITRAMFS_IMAGE}:do_rootfs')
+ d.appendVarFlag('do_assemble_fitimage', 'depends', '
${INITRAMFS_IMAGE}:do_rootfs')
# NOTE: setting INITRAMFS_TASK is for backward compatibility
# The preferred method is to set INITRAMFS_IMAGE, because
@@ -485,6 +489,164 @@ do_uboot_mkimage() {
addtask uboot_mkimage before do_install after do_compile
+#
+# Emit the fitImage ITS header
+#
+fitimage_emit_section_start() {
+ cat << EOF >> fit-image.its
+/dts-v1/;
+
+/ {
+ description = "U-Boot fitImage for ${DISTRO_NAME}/${PV}/${MACHINE}";
+ #address-cells = <1>;
+
+ images {
+EOF
+}
+
+#
+# Emit the fitImage ITS kernel section
+#
+# $1 ... Image counter
+# $2 ... Path to kernel image
+# $3 ... Compression type
+fitimage_emit_section_kernel() {
+
+ kernel_csum="sha1"
+
+ ENTRYPOINT=${UBOOT_ENTRYPOINT}
+ if test -n "${UBOOT_ENTRYSYMBOL}"; then
+ ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \
+ awk '$3=="${UBOOT_ENTRYSYMBOL}" {print $1}'`
+ fi
+
+ cat << EOF >> fit-image.its
+ kernel@${1} {
+ description = "Linux kernel";
+ data = /incbin/("${2}");
+ type = "kernel";
+ arch = "${UBOOT_ARCH}";
+ os = "linux";
+ compression = "${3}";
+ load = <${UBOOT_LOADADDRESS}>;
+ entry = <${ENTRYPOINT}>;
+ hash@1 {
+ algo = "${kernel_csum}";
+ };
+ };
+EOF
+}
+
+#
+# Emit the fitImage ITS DTB section
+#
+# $1 ... Image counter
+# $2 ... Path to DTB image
+fitimage_emit_section_dtb() {
+
+ dtb_csum="sha1"
+
+ cat << EOF >> fit-image.its
+ fdt@${1} {
+ description = "Flattened Device Tree blob";
+ data = /incbin/("${2}");
+ type = "flat_dt";
+ arch = "${UBOOT_ARCH}";
+ compression = "none";
+ hash@1 {
+ algo = "${dtb_csum}";
+ };
+ };
+EOF
+}
+
+#
+# Emit the fitImage ITS configuration section
+#
+# $1 ... Linux kernel ID
+# $2 ... DTB image ID
+fitimage_emit_section_config() {
+
+ conf_csum="sha1"
+
+ # Test if we have any DTBs at all
+ if [ -z "${2}" ] ; then
+ conf_desc="Boot Linux kernel"
+ fdt_line=""
+ else
+ conf_desc="Boot Linxu kernel with FDT blob"
+ fdt_line="fdt = \"fdt@${2}\";"
+ fi
+ kernel_line="kernel = \"kernel@${1}\";"
+
+ cat << EOF >> fit-image.its
+ };
+
+ configurations {
+ default = "conf@1";
+ conf@1 {
+ description = "${conf_desc}";
+ ${kernel_line}
+ ${fdt_line}
+ hash@1 {
+ algo = "${conf_csum}";
+ };
+ };
+ };
+};
+EOF
+}
+
+do_assemble_fitimage () {
+ if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then
+ kernelcount=1
+ dtbcount=""
+ rm -f fit-image.its
+
+ fitimage_emit_section_start
+ #
+ # Step 1: Prepare a kernel image section.
+ #
+ uboot_prep_kimage
+ fitimage_emit_section_kernel "${kernelcount}" linux.bin
"${linux_comp}"
+
+ #
+ # Step 2: Prepare a DTB image section
+ #
+ if test -n "${KERNEL_DEVICETREE}"; then
+ dtbcount=1
+ for DTB in ${KERNEL_DEVICETREE}; do
+ if echo ${DTB} | grep -q '/dts/'; then
+ bbwarn "${DTB} contains the full path
to the the dts file, but only the dtb name should be used."
+ DTB=`basename ${DTB} | sed
's,\.dts$,.dtb,g'`
+ fi
+ DTB_PATH="arch/${ARCH}/boot/dts/${DTB}"
+ if [ ! -e "${DTB_PATH}" ]; then
+ DTB_PATH="arch/${ARCH}/boot/${DTB}"
+ fi
+
+ fitimage_emit_section_dtb ${dtbcount}
${DTB_PATH}
+ dtbcount=`expr ${dtbcount} + 1`
+ done
+
+ # Force the first DTB in the default config
+ dtbcount=1
+ fi
+
+ #
+ # Step 3: Prepare a configurations section
+ #
+ fitimage_emit_section_config ${kernelcount} ${dtbcount}
+
+ #
+ # Step 4: Assemble the image
+ #
+ uboot-mkimage -f fit-image.its arch/${ARCH}/boot/fitImage
+ fi
+}
+
+addtask assemble_fitimage before do_install after do_compile
+
kernel_do_deploy() {
install -m 0644 ${KERNEL_OUTPUT}
${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
if [ ${MODULE_TARBALL_DEPLOY} = "1" ] && (grep -q -i -e
'^CONFIG_MODULES=y$' .config); then
@@ -499,13 +661,34 @@ kernel_do_deploy() {
cp ${COREBASE}/meta/files/deploydir_readme.txt
${DEPLOYDIR}/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
cd ${B}
+
# Update deploy directory
+
+ if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then
+ echo "Copying fit-image.its source file..."
+
its_base_name="${KERNEL_IMAGETYPE}-its-${PV}-${PR}-${MACHINE}-${DATETIME}"
+ its_symlink_name=${KERNEL_IMAGETYPE}-its-${MACHINE}
+ install -m 0644 fit-image.its ${DEPLOYDIR}/${its_base_name}.its
+
linux_bin_base_name="${KERNEL_IMAGETYPE}-linux.bin-${PV}-${PR}-${MACHINE}-${DATETIME}"
+ linux_bin_symlink_name=${KERNEL_IMAGETYPE}-linux.bin-${MACHINE}
+ install -m 0644 linux.bin
${DEPLOYDIR}/${linux_bin_base_name}.bin
+
+ fi
+
if [ -e "${KERNEL_OUTPUT}.initramfs" ]; then
echo "Copying deploy kernel-initramfs image and setting up
links..."
initramfs_base_name=${INITRAMFS_BASE_NAME}
initramfs_symlink_name=${KERNEL_IMAGETYPE}-initramfs-${MACHINE}
install -m 0644 ${KERNEL_OUTPUT}.initramfs
${DEPLOYDIR}/${initramfs_base_name}.bin
- cd ${DEPLOYDIR}
+ fi
+
+ cd ${DEPLOYDIR}
+ if test "x${KERNEL_IMAGETYPE}" = "xfitImage" ; then
+ ln -sf ${its_base_name}.its ${its_symlink_name}.its
+ ln -sf ${linux_bin_base_name}.bin ${linux_bin_symlink_name}.bin
+ fi
+
+ if [ -e "${KERNEL_OUTPUT}.initramfs" ]; then
ln -sf ${initramfs_base_name}.bin ${initramfs_symlink_name}.bin
fi
}
--
2.0.1
--
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
