This also make a change where for kernel
S != B, this is done because when S = B
and we use O= option or set KBUILD_OUTPUT
to point to objectdir, kernel build system
ends up denoting itself dirty and asking for
running mrproper during later build steps
after do_configure but works perfectly
for when S != B
Additional fixes make sure that we do not
assume directory paths when accessing files
Move exporting KBUILD_OUTPUT from kernel-yocto
into kernel class
Signed-off-by: Khem Raj <raj.k...@gmail.com>
---
meta/classes/kernel-yocto.bbclass | 3 +-
meta/classes/kernel.bbclass | 71 ++++++++++++++++++++++-----------------
2 files changed, 41 insertions(+), 33 deletions(-)
diff --git a/meta/classes/kernel-yocto.bbclass
b/meta/classes/kernel-yocto.bbclass
index 8f79932..73257e1 100644
--- a/meta/classes/kernel-yocto.bbclass
+++ b/meta/classes/kernel-yocto.bbclass
@@ -408,6 +408,5 @@ do_kernel_link_vmlinux() {
ln -sf ../../../vmlinux
}
-OE_TERMINAL_EXPORTS += "GUILT_BASE KBUILD_OUTPUT"
+OE_TERMINAL_EXPORTS += "GUILT_BASE"
GUILT_BASE = "meta"
-KBUILD_OUTPUT = "${B}"
diff --git a/meta/classes/kernel.bbclass b/meta/classes/kernel.bbclass
index 51626b0..b000147 100644
--- a/meta/classes/kernel.bbclass
+++ b/meta/classes/kernel.bbclass
@@ -10,6 +10,7 @@ KERNEL_IMAGETYPE ?= "zImage"
INITRAMFS_IMAGE ?= ""
INITRAMFS_TASK ?= ""
INITRAMFS_IMAGE_BUNDLE ?= ""
+B = "${WORKDIR}/build"
python __anonymous () {
kerneltype = d.getVar('KERNEL_IMAGETYPE', True) or ''
@@ -157,6 +158,7 @@ kernel_do_compile() {
# different initramfs image. The way to do that in the kernel
# is to specify:
# make ...args... CONFIG_INITRAMFS_SOURCE=some_other_initramfs.cpio
+ cd ${S}
if [ "$use_alternate_initrd" = "" ] && [ "${INITRAMFS_TASK}" != "" ] ;
then
# The old style way of copying an prebuilt image and building it
# is turned on via INTIRAMFS_TASK != ""
@@ -165,13 +167,14 @@ kernel_do_compile() {
fi
oe_runmake ${KERNEL_IMAGETYPE_FOR_MAKE} ${KERNEL_ALT_IMAGETYPE}
CC="${KERNEL_CC}" LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS} $use_alternate_initrd
if test "${KERNEL_IMAGETYPE_FOR_MAKE}.gz" = "${KERNEL_IMAGETYPE}"; then
- gzip -9c < "${KERNEL_IMAGETYPE_FOR_MAKE}" > "${KERNEL_OUTPUT}"
+ gzip -9c < "${B}/${KERNEL_IMAGETYPE_FOR_MAKE}" >
"${KERNEL_OUTPUT}"
fi
}
do_compile_kernelmodules() {
unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
- if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
+ cd ${S}
+ if (grep -q -i -e '^CONFIG_MODULES=y$' ${B}/.config); then
oe_runmake ${PARALLEL_MAKE} modules CC="${KERNEL_CC}"
LD="${KERNEL_LD}" ${KERNEL_EXTRA_ARGS}
else
bbnote "no modules to compile"
@@ -184,7 +187,8 @@ kernel_do_install() {
# First install the modules
#
unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
- if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
+ cd ${S}
+ if (grep -q -i -e '^CONFIG_MODULES=y$' ${B}/.config); then
oe_runmake DEPMOD=echo INSTALL_MOD_PATH="${D}" modules_install
rm "${D}/lib/modules/${KERNEL_VERSION}/build"
rm "${D}/lib/modules/${KERNEL_VERSION}/source"
@@ -200,10 +204,10 @@ kernel_do_install() {
install -d ${D}/${KERNEL_IMAGEDEST}
install -d ${D}/boot
install -m 0644 ${KERNEL_OUTPUT}
${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}
- install -m 0644 System.map ${D}/boot/System.map-${KERNEL_VERSION}
- install -m 0644 .config ${D}/boot/config-${KERNEL_VERSION}
- install -m 0644 vmlinux ${D}/boot/vmlinux-${KERNEL_VERSION}
- [ -e Module.symvers ] && install -m 0644 Module.symvers
${D}/boot/Module.symvers-${KERNEL_VERSION}
+ install -m 0644 ${B}/System.map ${D}/boot/System.map-${KERNEL_VERSION}
+ install -m 0644 ${B}/.config ${D}/boot/config-${KERNEL_VERSION}
+ install -m 0644 ${B}/vmlinux ${D}/boot/vmlinux-${KERNEL_VERSION}
+ [ -e ${B}/Module.symvers ] && install -m 0644 ${B}/Module.symvers
${D}/boot/Module.symvers-${KERNEL_VERSION}
install -d ${D}${sysconfdir}/modules-load.d
install -d ${D}${sysconfdir}/modprobe.d
@@ -232,20 +236,21 @@ kernel_do_install() {
# dir. This ensures the original Makefiles are used and not the
# redirecting Makefiles in the build directory.
#
+ pwd="$PWD"
+ cd "${B}"
find . -depth -not -name "*.cmd" -not -name "*.o" -not -path
"./Documentation*" -not -path "./.*" -print0 | cpio --null -pdlu $kerneldir
- cp .config $kerneldir
+ cp ${B}/.config $kerneldir
if [ "${S}" != "${B}" ]; then
- pwd="$PWD"
cd "${S}"
find . -depth -not -path "./Documentation*" -not -path "./.*"
-print0 | cpio --null -pdlu $kerneldir
- cd "$pwd"
fi
+ cd "$pwd"
# Test to ensure that the output file and image type are not actually
# the same file. If hardlinking is used, they will be the same, and
there's
# no need to install.
! [ ${KERNEL_OUTPUT} -ef $kerneldir/${KERNEL_IMAGETYPE} ] && install -m
0644 ${KERNEL_OUTPUT} $kerneldir/${KERNEL_IMAGETYPE}
- install -m 0644 System.map $kerneldir/System.map-${KERNEL_VERSION}
+ install -m 0644 ${B}/System.map $kerneldir/System.map-${KERNEL_VERSION}
# Dummy Makefile so the clean below works
mkdir $kerneldir/Documentation
@@ -260,24 +265,24 @@ kernel_do_install() {
# we clean the scripts dir while leaving the generated config
# and include files.
#
- oe_runmake -C $kerneldir CC="${KERNEL_CC}" LD="${KERNEL_LD}" clean
- make -C $kerneldir _mrproper_scripts
+ oe_runmake KBUILD_OUTPUT= -C $kerneldir CC="${KERNEL_CC}"
LD="${KERNEL_LD}" clean
+ make KBUILD_OUTPUT= -C $kerneldir _mrproper_scripts
find $kerneldir -path $kerneldir/lib -prune -o -path $kerneldir/tools
-prune -o -path $kerneldir/scripts -prune -o -name "*.[csS]" -exec rm '{}' \;
# As of Linux kernel version 3.0.1, the clean target removes
# arch/powerpc/lib/crtsavres.o which is present in
# KBUILD_LDFLAGS_MODULE, making it required to build external modules.
if [ ${ARCH} = "powerpc" ]; then
- cp -l arch/powerpc/lib/crtsavres.o
$kerneldir/arch/powerpc/lib/crtsavres.o
+ cp -l ${B}/arch/powerpc/lib/crtsavres.o
$kerneldir/arch/powerpc/lib/crtsavres.o
fi
# Necessary for building modules like compat-wireless.
- if [ -f include/generated/bounds.h ]; then
- cp -l include/generated/bounds.h
$kerneldir/include/generated/bounds.h
+ if [ -f ${B}/include/generated/bounds.h ]; then
+ cp -l ${B}/include/generated/bounds.h
$kerneldir/include/generated/bounds.h
fi
- if [ -d arch/${ARCH}/include/generated ]; then
+ if [ -d ${B}/arch/${ARCH}/include/generated ]; then
mkdir -p $kerneldir/arch/${ARCH}/include/generated/
- cp -flR arch/${ARCH}/include/generated/*
$kerneldir/arch/${ARCH}/include/generated/
+ cp -flR ${B}/arch/${ARCH}/include/generated/*
$kerneldir/arch/${ARCH}/include/generated/
fi
# Remove the following binaries which cause strip or arch QA errors
@@ -302,6 +307,7 @@ python sysroot_stage_all () {
}
kernel_do_configure() {
+ cd ${S}
# fixes extra + in /lib/modules/2.6.37+
# $ scripts/setlocalversion . => +
# $ make kernelversion => 2.6.37
@@ -313,7 +319,7 @@ kernel_do_configure() {
if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
cp "${WORKDIR}/defconfig" "${B}/.config"
fi
- yes '' | oe_runmake oldconfig
+ oe_runmake olddefconfig
}
do_savedefconfig() {
@@ -432,19 +438,19 @@ do_uboot_mkimage() {
if test "x${KEEPUIMAGE}" != "xyes" ; then
ENTRYPOINT=${UBOOT_ENTRYPOINT}
if test -n "${UBOOT_ENTRYSYMBOL}"; then
- ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \
+ ENTRYPOINT=`${HOST_PREFIX}nm ${B}/vmlinux | \
awk '$3=="${UBOOT_ENTRYSYMBOL}" {print
$1}'`
fi
- if test -e arch/${ARCH}/boot/compressed/vmlinux ; then
- ${OBJCOPY} -O binary -R .note -R .comment -S
arch/${ARCH}/boot/compressed/vmlinux linux.bin
- uboot-mkimage -A ${UBOOT_ARCH} -O linux -T
kernel -C none -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n
"${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin arch/${ARCH}/boot/uImage
- rm -f linux.bin
+ if test -e ${B}/arch/${ARCH}/boot/compressed/vmlinux ;
then
+ ${OBJCOPY} -O binary -R .note -R .comment -S
${B}/arch/${ARCH}/boot/compressed/vmlinux ${B}/linux.bin
+ uboot-mkimage -A ${UBOOT_ARCH} -O linux -T
kernel -C none -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n
"${DISTRO_NAME}/${PV}/${MACHINE}" -d ${B}/linux.bin
${B}/arch/${ARCH}/boot/uImage
+ rm -f ${B}/linux.bin
else
- ${OBJCOPY} -O binary -R .note -R .comment -S
vmlinux linux.bin
- rm -f linux.bin.gz
- gzip -9 linux.bin
- uboot-mkimage -A ${UBOOT_ARCH} -O linux -T
kernel -C gzip -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n
"${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin.gz arch/${ARCH}/boot/uImage
- rm -f linux.bin.gz
+ ${OBJCOPY} -O binary -R .note -R .comment -S
${B}/vmlinux ${B}/linux.bin
+ rm -f ${B}/linux.bin.gz
+ gzip -9 ${B}/linux.bin > ${B}/linux.bin.gz
+ uboot-mkimage -A ${UBOOT_ARCH} -O linux -T
kernel -C gzip -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n
"${DISTRO_NAME}/${PV}/${MACHINE}" -d ${B}/linux.bin.gz
${B}/arch/${ARCH}/boot/uImage
+ rm -f ${B}/linux.bin.gz
fi
fi
fi
@@ -453,8 +459,8 @@ do_uboot_mkimage() {
addtask uboot_mkimage before do_install after do_compile
kernel_do_deploy() {
- install -m 0644 ${KERNEL_OUTPUT}
${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
- if [ ${MODULE_TARBALL_DEPLOY} = "1" ] && (grep -q -i -e
'^CONFIG_MODULES=y$' .config); then
+ install -m 0644
${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}
${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
+ if [ ${MODULE_TARBALL_DEPLOY} = "1" ] && (grep -q -i -e
'^CONFIG_MODULES=y$' ${B}/.config); then
mkdir -p ${D}/lib
tar -cvzf ${DEPLOYDIR}/${MODULE_TARBALL_BASE_NAME} -C ${D} lib
ln -sf ${MODULE_TARBALL_BASE_NAME}
${DEPLOYDIR}/${MODULE_TARBALL_SYMLINK_NAME}
@@ -483,3 +489,6 @@ addtask deploy before do_build after do_install
EXPORT_FUNCTIONS do_deploy
+OE_TERMINAL_EXPORTS += "KBUILD_OUTPUT"
+export KBUILD_OUTPUT = "${B}"
+
--
1.8.5.3
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
