When the u-boot(HEAD of master in git://git.freescale.com/ppc/sdk/u-boot.git) of p1022ds is built with different binutils in Yocto, the result is different.
With binutils-2.23.1(last version in Yocto), u-boot can be built correctly. With binutils-2.23.2(current version in Yocto), the build failed as following: | release.S: Assembler messages: | release.S:236: Error: value of 4294963524 too large for field of 2 bytes at 170 | release.S:237: Error: operand out of range (0xfffffffffffff144 is not between 0x0000000000000000 and 0x000000000000ffff) | release.S:237: Error: value of 4294963524 too large for field of 2 bytes at 174 | release.S:365: Error: value of 4294963524 too large for field of 2 bytes at 206 | release.S:366: Error: operand out of range (0xfffffffffffff144 is not between 0x0000000000000000 and 0x000000000000ffff) | release.S:366: Error: value of 4294963524 too large for field of 2 bytes at 210 | release.S:390: Error: value of 4294963520 too large for field of 2 bytes at 278 | release.S:391: Error: operand out of range (0xfffffffffffff140 is not between 0x0000000000000000 and 0x000000000000ffff) | release.S:391: Error: value of 4294963520 too large for field of 2 bytes at 282 Below is the failed code section: [..snip..] 233 #define toreset(x) (x - __secondary_start_page + 0xfffff000) 234 235 /* get our PIR to figure out our table entry */ 236 lis r3,toreset(__spin_table_addr)@h 237 ori r3,r3,toreset(__spin_table_addr)@l 238 lwz r3,0(r3) [..snip..] Seems like the build error is related to binutils, can somebody shed some light on the issue? Thanks in advance. Best Regards, Zhenhua _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.openembedded.org/mailman/listinfo/openembedded-core
