Hi Adrian, On May 31, 2012, at 11:13 PM, Adrian Alonso wrote:
>>> That's a second process that you need todo with xilinx EDK to export >>> and launch xilinx SDK >>> from there create a new device tree project which will parse the "mhs" >>> hardware descriptor file >>> and from there generate the device tree according to the hwd settings... I've created a hardware bsp project using Xilinx SDK 14.1, and used the xilinx-ml507-update project, (after updating it to XPS 14.1 format). Now the script in meta-xilinx/classes/xilinx-kernel.bbclass is looking for a *.dts file, but I don't see that being created anywhere, in my bsp projects. The XPS SDK project is generated into the following location from your XPS system.mhs project: /project/xilinx-sdk-workspace (which contains two subfolders linux_2_6_bsp_0, and xilinx-ml507_hw_platform) Your XPS project is located in /project/xilinx-ml507-updated and my local.conf settings are XILINX_BSP_PATH ?= "/project/xilinx-ml507-updated" is that the correct BSP path location? When I try to build the linux-xilinx recipe, I get the following errors: NOTE: package linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15: task do_unpack: Started NOTE: package linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15: task do_unpack: Succeeded NOTE: Running task 854 of 867 (ID: 1, /tool/yocto/meta-xilinx/recipes-kernel/linux/linux-xilinx_git.bb, do_patch) NOTE: package linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15: task do_patch: Started NOTE: package linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15: task do_patch: Succeeded NOTE: Running task 855 of 867 (ID: 6, /tool/yocto/meta-xilinx/recipes-kernel/linux/linux-xilinx_git.bb, do_configure) NOTE: package linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15: task do_configure: Started ERROR: Function failed: do_configure (see /tool/yocto/poky/build/tmp/work/virtex5-poky-linux/linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15/temp/log.do_configure.30845 for further information) ERROR: Logfile of failure stored in: /tool/yocto/poky/build/tmp/work/virtex5-poky-linux/linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15/temp/log.do_configure.30845 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: Executing shell function do_configure | ERROR: Function failed: do_configure (see /tool/yocto/poky/build/tmp/work/virtex5-poky-linux/linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15/temp/log.do_configure.30845 for further information) | ERROR: No device tree found, missing hardware ref design? NOTE: package linux-xilinx-2.6.37.1+git1+86c81ccd7c8e895904bfff95bd4f87c9615f7fba-r15: task do_configure: Failed ERROR: Task 6 (/tool/yocto/meta-xilinx/recipes-kernel/linux/linux-xilinx_git.bb, do_configure) failed with exit code '1' NOTE: Tasks Summary: Attempted 856 tasks of which 852 didn't need to be rerun and 1 failed. Summary: 1 task failed: /tool/yocto/meta-xilinx/recipes-kernel/linux/linux-xilinx_git.bb, do_configure Summary: There was 1 ERROR message shown, returning a non-zero exit code. Best regards, Elvis Dowson _______________________________________________ Openembedded-core mailing list Openembedded-core@lists.openembedded.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core