Hi Bruce, I cherry-picked this 5.15.x series into kirkstone and I'm getting a warning with the poky-tiny build. Any suggestions?
(you can view the patch set in: https://git.openembedded.org/openembedded-core-contrib/log/?h=stable/kirkstone-nut) Steve WARNING: linux-yocto-tiny-5.15.68+gitAUTOINC+81c5990606_35d0c78ae3-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration: [NOTE]: 'CONFIG_ATA_ACPI' last val (y) and .config val (n) do not match [INFO]: CONFIG_ATA_ACPI : n [INFO]: raw config text: config ATA_ACPI bool "ATA ACPI Support" default y select PATA_TIMINGS depends on ACPI && ATA help This option adds support for ATA-related ACPI objects. These ACPI objects add the ability to retrieve taskfiles from the ACPI BIOS and write them to the disk controller. These objects may be related to performance, security, power management, or other areas. You can disable this at kernel boot time by using the option libata.noacpi=1 Config 'ATA_ACPI' has the following Direct dependencies (ATA_ACPI=n): ACPI(=n) && ATA(=y) Parent dependencies are: ACPI [n] ATA [y] [INFO]: config 'CONFIG_ATA_ACPI' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_SERIAL_8250_PNP' last val (y) and .config val (n) do not match [INFO]: CONFIG_SERIAL_8250_PNP : n [INFO]: raw config text: config SERIAL_8250_PNP bool "8250/16550 PNP device support" if EXPERT default y depends on SERIAL_8250 && PNP && HAS_IOMEM && TTY help This builds standard PNP serial support. You may be able to disable this feature if you only need legacy serial support. Config 'SERIAL_8250_PNP' has the following Direct dependencies (SERIAL_8250_PNP=n): SERIAL_8250(=y) && PNP(=n) && HAS_IOMEM(=y) && TTY(=y) Parent dependencies are: HAS_IOMEM [y] EXPERT [y] TTY [y] PNP [n] SERIAL_8250 [y] [INFO]: config 'CONFIG_SERIAL_8250_PNP' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_EFI' last val (y) and .config val (n) do not match [INFO]: CONFIG_EFI : n [INFO]: raw config text: config EFI bool "EFI runtime service support" select UCS2_STRING select EFI_RUNTIME_WRAPPERS select ARCH_USE_MEMREMAP_PROT depends on ACPI help This enables the kernel to use EFI runtime services that are available (such as the EFI variable services). This option is only useful on systems that have EFI firmware. In addition, you should use the latest ELILO loader available at <http://elilo.sourceforge.net> in order to take advantage of EFI runtime services. However, even with this option, the resultant kernel should continue to boot on existing non-EFI platforms. Config 'EFI' has the following Direct dependencies (EFI=n): ACPI(=n) Parent dependencies are: ACPI [n] [INFO]: config 'CONFIG_EFI' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_EFI_STUB' last val (y) and .config val (n) do not match [INFO]: CONFIG_EFI_STUB : n [INFO]: raw config text: config EFI_STUB bool "EFI stub support" select RELOCATABLE depends on EFI && !X86_USE_3DNOW && (y || X86_32) help This kernel feature allows a bzImage to be loaded directly by EFI firmware without the use of a bootloader. See Documentation/admin-guide/efi-stub.rst for more information. Config 'EFI_STUB' has the following Direct dependencies (EFI_STUB=n): EFI(=n) && !X86_USE_3DNOW(=n) (=y) && y || X86_32(=y) (=y) Parent dependencies are: EFI [n] X86_32 [y] X86_USE_3DNOW [n] [INFO]: config 'CONFIG_EFI_STUB' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_EFIVAR_FS' last val (y) and .config val (n) do not match [INFO]: CONFIG_EFIVAR_FS : n [INFO]: raw config text: config EFIVAR_FS tristate "EFI Variable filesystem" default m depends on EFI help efivarfs is a replacement filesystem for the old EFI variable support via sysfs, as it doesn't suffer from the same 1024-byte variable size limit. To compile this file system support as a module, choose M here. The module will be called efivarfs. If unsure, say N. Config 'EFIVAR_FS' has the following Direct dependencies (EFIVAR_FS=n): EFI(=n) Parent dependencies are: EFI [n] [INFO]: config 'CONFIG_EFIVAR_FS' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_FB_EFI' last val (y) and .config val (n) do not match [INFO]: CONFIG_FB_EFI : n [INFO]: raw config text: config FB_EFI bool "EFI-based Framebuffer Support" select DRM_PANEL_ORIENTATION_QUIRKS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT depends on FB = y && !IA64 && EFI && HAS_IOMEM help This is the EFI frame buffer device driver. If the firmware on your platform is EFI 1.10 or UEFI 2.0, select Y to add support for using the EFI framebuffer as your console. Config 'FB_EFI' has the following Direct dependencies (FB_EFI=n): FB(=y) = y (=y) && !IA64(undefined/n) (=y) && EFI(=n) && HAS_IOMEM(=y) Parent dependencies are: HAS_IOMEM [y] EFI [n] FB [y] IA64 [IA64] [INFO]: config 'CONFIG_FB_EFI' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_EFI_VARS' last val (m) and .config val (n) do not match [INFO]: CONFIG_EFI_VARS : n [INFO]: raw config text: config EFI_VARS tristate "EFI Variable Support via sysfs" default n depends on EFI && (X86 || IA64) && EFI help If you say Y here, you are able to get EFI (Extensible Firmware Interface) variable information via sysfs. You may read, write, create, and destroy EFI variables through this interface. Note that this driver is only retained for compatibility with legacy users: new users should use the efivarfs filesystem instead. Config 'EFI_VARS' has the following Direct dependencies (EFI_VARS=n): EFI(=n) && X86(=y) || IA64(undefined/n) (=y) Parent dependencies are: IA64 [IA64] EFI [n] X86 [y] [INFO]: config 'CONFIG_EFI_VARS' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_HPET' last val (y) and .config val (n) do not match [INFO]: CONFIG_HPET : n [INFO]: raw config text: config HPET bool "HPET - High Precision Event Timer" if X86 || IA64 default n depends on ACPI help If you say Y here, you will have a miscdevice named "/dev/hpet/". Each open selects one of the timers supported by the HPET. The timers are non-periodic and/or periodic. Config 'HPET' has the following Direct dependencies (HPET=n): ACPI(=n) Parent dependencies are: IA64 [IA64] X86 [y] ACPI [n] [INFO]: config 'CONFIG_HPET' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_HPET_MMAP' last val (y) and .config val (n) do not match [INFO]: CONFIG_HPET_MMAP : n [INFO]: raw config text: config HPET_MMAP bool "Allow mmap of HPET" default y depends on HPET help If you say Y here, user applications will be able to mmap the HPET registers. Config 'HPET_MMAP' has the following Direct dependencies (HPET_MMAP=n): HPET(=n) Parent dependencies are: HPET [n] [INFO]: config 'CONFIG_HPET_MMAP' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_X86_AMD_PLATFORM_DEVICE' last val (y) and .config val (n) do not match [INFO]: CONFIG_X86_AMD_PLATFORM_DEVICE : n [INFO]: raw config text: config X86_AMD_PLATFORM_DEVICE bool "AMD ACPI2Platform devices support" select COMMON_CLK select PINCTRL depends on ACPI help Select to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD Carrizo and later chipsets. I2C and UART depend on COMMON_CLK to set clock. GPIO driver is implemented under PINCTRL subsystem. Config 'X86_AMD_PLATFORM_DEVICE' has the following Direct dependencies (X86_AMD_PLATFORM_DEVICE=n): ACPI(=n) Parent dependencies are: ACPI [n] [INFO]: config 'CONFIG_X86_AMD_PLATFORM_DEVICE' was set, but it wasn't assignable, check (parent) dependencies [NOTE]: 'CONFIG_MMC_SDHCI_ACPI' last val (y) and .config val (n) do not match [INFO]: CONFIG_MMC_SDHCI_ACPI : n [INFO]: raw config text: config MMC_SDHCI_ACPI tristate "SDHCI support for ACPI enumerated SDHCI controllers" select IOSF_MBI if X86 depends on MMC_SDHCI && ACPI && PCI && MMC help This selects support for ACPI enumerated SDHCI controllers, identified by ACPI Compatibility ID PNP0D40 or specific ACPI Hardware IDs. If you have a controller with this interface, say Y or M here. If unsure, say N. Config 'MMC_SDHCI_ACPI' has the following Direct dependencies (MMC_SDHCI_ACPI=n): MMC_SDHCI(=y) && ACPI(=n) && PCI(=y) && MMC(=y) Parent dependencies are: X86 [y] MMC_SDHCI [y] PCI [y] MMC [y] ACPI [n] [INFO]: config 'CONFIG_MMC_SDHCI_ACPI' was set, but it wasn't assignable, check (parent) dependencies NOTE: recipe linux-yocto-tiny-5.15.68+gitAUTOINC+81c5990606_35d0c78ae3-r0: task do_kernel_configcheck: Succeeded On Mon, Sep 19, 2022 at 4:28 AM Bruce Ashfield <bruce.ashfi...@gmail.com> wrote: > > From: Bruce Ashfield <bruce.ashfi...@gmail.com> > > Updating to the latest korg -stable release that comprises > the following commits: > > dd20085f2a88 Linux 5.15.68 > e04b25638aef ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency > 154e72a4b381 perf machine: Use path__join() to compose a path instead of > snprintf(dir, '/', filename) > 590b4f10e3a4 drm/bridge: display-connector: implement bus fmts callbacks > e084c6ab37d2 arm64: errata: add detection for AMEVCNTR01 incrementing > incorrectly > 4740910867ea iommu/vt-d: Correctly calculate sagaw value of IOMMU > f9e792035a0b arm64/bti: Disable in kernel BTI when cross section thunks > are broken > a8a007c5b10f Revert "arm64: kasan: Revert "arm64: mte: reset the page tag > in page->flags"" > 7aa57d869e4a hwmon: (mr75203) enable polling for all VM channels > 5e0fddad7100 hwmon: (mr75203) fix multi-channel voltage reading > 948b7beb0073 hwmon: (mr75203) fix voltage equation for negative source > input > a02267ebb247 hwmon: (mr75203) update pvt->v_num and vm_num to the actual > number of used sensors > 000f3353231e hwmon: (mr75203) fix VM sensor allocation when > "intel,vm-map" not defined > 4b198c41d736 s390/boot: fix absolute zero lowcore corruption on boot > a557ae094207 iommu/amd: use full 64-bit value in build_completion_wait() > 4f8d65884808 swiotlb: avoid potential left shift overflow > df82f5ce4f50 i40e: Fix ADQ rate limiting for PF > 39d9de5872b6 i40e: Refactor tc mqprio checks > 657d9d8ac3e6 kbuild: disable header exports for UML in a straightforward > way > 12202e0f74fd MIPS: loongson32: ls1c: Fix hang during startup > 166ae43f02fb ASoC: mchp-spdiftx: Fix clang -Wbitfield-constant-conversion > 4643fbc79ded ASoC: mchp-spdiftx: remove references to mchp_i2s_caps > 30a455ac385e hwmon: (tps23861) fix byte order in resistance register > 159d35a87ec3 perf script: Fix Cannot print 'iregs' field for hybrid > systems > 4519d4e32f98 sch_sfb: Also store skb len before calling child enqueue > a600a9babad6 RDMA/irdma: Report RNR NAK generation in device caps > 3ca173b217f4 RDMA/irdma: Return correct WC error for bind operation > failure > c1872dfde6f7 RDMA/irdma: Report the correct max cqes from query device > a1d7c8647c18 nvmet: fix mar and mor off-by-one errors > a96b1d33ec71 tcp: fix early ETIMEDOUT after spurious non-SACK RTO > 8589bbfad2b4 nvme-tcp: fix regression that causes sporadic requests to > time out > 13c80a6c1124 nvme-tcp: fix UAF when detecting digest errors > 8ddd001cef5e erofs: fix pcluster use-after-free on UP platforms > 5fbe35c94abc RDMA/mlx5: Set local port to one when accessing counters > 819110054b14 IB/core: Fix a nested dead lock as part of ODP flow > 55195563ec29 ipv6: sr: fix out-of-bounds read when setting HMAC data. > 4c4eda136410 RDMA/siw: Pass a pointer to virt_to_page() > 595e3616f8e0 xen-netback: only remove 'hotplug-status' when the vif is > actually destroyed > c3efe896f13b iavf: Detach device during reset task > 2ed94383f3a2 i40e: Fix kernel crash during module removal > 3e245b0e2168 ice: use bitmap_free instead of devm_kfree > 8527c9a6bf8e tcp: TX zerocopy should not sense pfmemalloc status > cd5f1a69d0b6 net: introduce __skb_fill_page_desc_noacc > 7eb9bf4edd1c tipc: fix shift wrapping bug in map_get() > 1a889da60afc sch_sfb: Don't assume the skb is still around after > enqueueing to child > b0b35b455ece Revert "net: phy: meson-gxl: improve link-up behavior" > 2f6640b19edf afs: Use the operation issue time instead of the reply time > for callbacks > e28eb3519d5f rxrpc: Fix an insufficiently large sglist in > rxkad_verify_packet_2() > 24a4e79d92e0 rxrpc: Fix ICMP/ICMP6 error handling > 59f1c62d91ca ALSA: usb-audio: Register card again for iface over > delayed_register option > 4dc401ef8b23 ALSA: usb-audio: Inform the delayed registration more > properly > a8edd49c94b4 RDMA/srp: Set scmnd->result only when scmnd is not NULL > 451c9ce1e2fc netfilter: nf_conntrack_irc: Fix forged IP logic > 1ce55ec5cb7c netfilter: nf_tables: clean up hook list when offload flags > check fails > 92837ac04779 netfilter: br_netfilter: Drop dst references before setting. > 940e58f2ccc0 ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled > all the time > 86706fa90be6 ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all > the time > d6015c56f477 ARM: dts: at91: sama5d2_icp: specify proper regulator output > ranges > a8ab10c3f137 ARM: dts: at91: sama5d27_wlsom1: specify proper regulator > output ranges > 6fbff44cba17 ARM: at91: pm: fix DDR recalibration when resuming from > backup and self-refresh > e11d08c825f2 ARM: at91: pm: fix self-refresh for sama7g5 > 32dd0b22a5ba wifi: wilc1000: fix DMA on stack objects > 6f7aa1029f8e RDMA/hns: Fix wrong fixed value of qp->rq.wqe_shift > c1796dd54259 RDMA/hns: Fix supported page size > 43245c77d9ef soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs > d3eb252d7636 RDMA/cma: Fix arguments order in net device validation > e2ec1064a47d tee: fix compiler warning in tee_shm_register() > eb53e84dc1ac regulator: core: Clean up on enable failure > a53b30716c60 soc: imx: gpcv2: Assert reset before ungating clock > 83a7e5d2f14e ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node > ae8e70e31763 RDMA/rtrs-srv: Pass the correct number of entries for dma > mapped SGL > ad69caa47861 RDMA/rtrs-clt: Use the right sg_cnt after ib_dma_map_sg > 237f16395304 ASoC: qcom: sm8250: add missing module owner > 3bf4bf54069f cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock > 509e3456d363 cgroup: Elide write-locking threadgroup_rwsem when updating > csses on an empty subtree > 3b97deb4abf5 NFS: Fix another fsync() issue after a server reboot > 31b992b3c39b NFS: Save some space in the inode > 88d24e83a268 NFS: Further optimisations for 'ls -l' > 1dcc308898e7 scsi: lpfc: Add missing destroy_workqueue() in error path > 6229fa494a59 scsi: mpt3sas: Fix use-after-free warning > d2ca79dd0b54 drm/i915: Implement WaEdpLinkRateDataReload > ebf46da50beb nvmet: fix a use-after-free > 58acd2ebae03 drm/amd/display: fix memory leak when using debugfs_lookup() > 26e9a1ded892 sched/debug: fix dentry leak in update_sched_domain_debugfs > 94c84128adb1 debugfs: add debugfs_lookup_and_remove() > 8875d606761e kprobes: Prohibit probes in gate area > 5321908ef74f vfio/type1: Unpin zero pages > 7da1afa444a1 btrfs: zoned: set pseudo max append zone limit in zone > emulation mode > 75082adeb414 tracing: Fix to check event_mutex is held while accessing > trigger list > 98e8e67395cc ALSA: usb-audio: Fix an out-of-bounds bug in > __snd_usb_parse_audio_interface() > df5ec554e9e3 ALSA: usb-audio: Split endpoint setups for hw_params and > prepare > d1118465ae2e ALSA: aloop: Fix random zeros in capture data when using > jiffies timer > 45814a53514e ALSA: emu10k1: Fix out of bounds access in > snd_emu10k1_pcm_channel_alloc() > 8015ef9e8a0e ALSA: pcm: oss: Fix race at SNDCTL_DSP_SYNC > ad5ef763dbbe drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly > fc5a2a9616f3 fbdev: chipsfb: Add missing pci_disable_device() in > chipsfb_pci_init() > c3abfd6ce2f3 fbdev: fbcon: Destroy mutex on freeing struct fb_info > a7dff6f41e16 md: Flush workqueue md_rdev_misc_wq in md_alloc() > 0b7058067eb8 net/core/skbuff: Check the return value of skb_copy_bits() > bd1b769564eb cpufreq: check only freq_table in __resolve_freq() > e928cf258910 netfilter: conntrack: work around exceeded receive window > 29906311b351 arm64: cacheinfo: Fix incorrect assignment of signed error > value to unsigned fw_level > 27092358e9c6 parisc: Add runtime check to prevent PA2.0 kernels on PA1.x > machines > deb2c9c0770b parisc: ccio-dma: Handle kmalloc failure in > ccio_init_resources() > c63ff388e7d4 Revert "parisc: Show error if wrong 32/64-bit compiler is > being used" > c50189129374 scsi: ufs: core: Reduce the power mode change timeout > 5a7a5b2edac4 drm/radeon: add a force flush to delay work when radeon > 622a557b28b7 drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup. > c15c2c2c0896 drm/amdgpu: Move psp_xgmi_terminate call from > amdgpu_xgmi_remove_device to psp_hw_fini > 1f574fbe9c2b drm/gem: Fix GEM handle release errors > bbfd857abbd2 scsi: megaraid_sas: Fix double kfree() > 8179f0e08578 scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port > ISP27XX > 625c78e1ae35 Revert "mm: kmemleak: take a full lowmem check in > kmemleak_*_phys()" > 7c6333411acf fs: only do a memory barrier for the first > set_buffer_uptodate() > 44b402da7b24 wifi: iwlegacy: 4965: corrected fix for potential off-by-one > overflow in il4965_rs_fill_link_cmd() > dd291e070be0 efi: capsule-loader: Fix use-after-free in efi_capsule_write > ee06f08139e7 efi: libstub: Disable struct randomization > 6427605fa781 net: wwan: iosm: remove pointless null check > e1ad7a011591 Linux 5.15.67 > 096e34b05a43 kbuild: fix up permissions on scripts/pahole-flags.sh > bcecd2ee19ef Linux 5.15.66 > e1779c25e48b USB: serial: ch341: fix disabled rx timer on older devices > e0923b4f38df USB: serial: ch341: fix lost character on LCR updates > 55d328924347 usb: dwc3: disable USB core PHY management > 121c6e37da76 usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup > 9d6a2d022010 usb: dwc3: fix PHY disable sequence > b775fbf532dc kbuild: Add skip_encoding_btf_enum64 option to pahole > 0baced0e0938 kbuild: Unify options for BTF generation for vmlinux and > modules > 309aea4b6b81 tty: n_gsm: add sanity check for gsm->receive in > gsm_receive_buf() > 1787ec7dcc37 drm/i915: Skip wm/ddb readout for disabled pipes > f9a0f49be767 drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing quirk > 301be8985e87 ALSA: seq: Fix data-race at module auto-loading > 9b7a07fcc5d4 ALSA: seq: oss: Fix data-race for max_midi_devs access > b2c973b52f14 ALSA: hda/realtek: Add speaker AMP init for Samsung laptops > with ALC298 > c5652d5d71cf net: mac802154: Fix a condition in the receive path > 4b9f3743a822 net: Use u64_stats_fetch_begin_irq() for stats fetch. > 57f1407ca166 ip: fix triggering of 'icmp redirect' > 5d20c6f932f2 wifi: mac80211: Fix UAF in ieee80211_scan_rx() > 552ba102a689 wifi: mac80211: Don't finalize CSA in IBSS mode if state is > disconnected > 253ec5fb8405 driver core: Don't probe devices after bus_type.match() > probe deferral > 7da29a2cc514 usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS > 299f4f420f23 usb: xhci-mtk: fix bandwidth release issue > 27102b39b6d0 usb: xhci-mtk: relax TT periodic bandwidth allocation > c548b99e1c37 USB: core: Prevent nested device-reset calls > 4e22a43ec717 s390: fix nospec table alignments > 047a4d0f7924 s390/hugetlb: fix prepare_hugepage_range() check for 2 GB > hugepages > efdfa236a085 usb-storage: Add ignore-residue quirk for NXP PN7462AU > 0f8b5d706dcd USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020) > bf6e4243f80b usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC > transfer > f1eb9e5d2f6e usb: cdns3: fix issue with rearming ISO OUT endpoint > 48917032c702 usb: dwc2: fix wrong order of phy_power_on and phy_init > ea72b22a05ea usb: typec: tcpm: Return ENOTSUPP for power supply prop > writes > 4be500c63911 usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake > IOM device > b201f6203197 usb: typec: altmodes/displayport: correct pin assignment for > UFP receptacles > 577f84a6f120 USB: serial: option: add support for Cinterion MV32-WA/WB > RmNet mode > 6415953963a9 USB: serial: option: add Quectel EM060K modem > 93c283a09959 USB: serial: option: add support for OPPO R11 diag port > 2bb1ad8c957d USB: serial: cp210x: add Decagon UCA device id > 3a6c5c5ab734 xhci: Add grace period after xHC start to prevent premature > runtime suspend. > 75913c562f5b media: mceusb: Use new usb_control_msg_*() routines > 2c948dd68b9e usb: dwc3: pci: Add support for Intel Raptor Lake > 23987d01de44 thunderbolt: Use the actual buffer in tb_async_error() > e31db376f6d1 xen-blkfront: Cache feature_persistent value before > advertisement > 895a90ad7b3e xen-blkfront: Advertise feature-persistent as user requested > 3e8107d69fc3 xen-blkback: Advertise feature-persistent as user requested > c235c4fc521f mm: pagewalk: Fix race between unmap and page walker > 763d77241d8f xen/grants: prevent integer overflow in > gnttab_dma_alloc_pages() > 03b1870fbc5e KVM: x86: Mask off unsupported and unknown bits of > IA32_ARCH_CAPABILITIES > 111a3586ed4a gpio: pca953x: Add mutex_lock for regcache sync in PM > 53196e037620 hwmon: (gpio-fan) Fix array out of bounds access > 7b8a284ffe7a clk: bcm: rpi: Add missing newline > ff0b144d4b0a clk: bcm: rpi: Prevent out-of-bounds access > e827a5f32a0d clk: bcm: rpi: Use correct order for the parameters of > devm_kcalloc() > 237b4ef4c088 clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate > 5ba6155d3b2f Input: rk805-pwrkey - fix module autoloading > 9766749a30f6 clk: core: Fix runtime PM sequence in clk_core_unprepare() > c13b0be5ade0 Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate > ops" > 519cd9c4b56e clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops > 0522550aeed4 drm/i915/reg: Fix spelling mistake "Unsupport" -> > "Unsupported" > fec48eba4783 KVM: VMX: Heed the 'msr' argument in msr_write_intercepted() > 9e3c9efa7caf cifs: fix small mempool leak in SMB2_negotiate() > 81203ab7a6ef binder: fix alloc->vma_vm_mm null-ptr dereference > c2a4b5dc8fa7 binder: fix UAF of ref->proc caused by race condition > da3c6d0708e6 mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage > switch failure > 8bca22970e1c mmc: core: Fix UHS-I SD 1.8V workaround branch > fc9b5b3f2ccc USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id > cf20c3533efc misc: fastrpc: fix memory corruption on open > 0e33b0f322fe misc: fastrpc: fix memory corruption on probe > 95ac9601feb5 iio: adc: mcp3911: use correct formula for AD conversion > 6e933a26e6a2 iio: ad7292: Prevent regulator double disable > df1b53bc799d Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING > flag > 9f185ca8e019 tty: serial: lpuart: disable flow control while waiting for > the transmit engine to complete > 532b255af195 musb: fix USB_MUSB_TUSB6010 dependency > 2535431ae967 vt: Clear selection before changing the font > a19846f0f45b powerpc: align syscall table for ppc32 > f12afb4b5db0 staging: r8188eu: add firmware dependency > dc02aaf95001 staging: rtl8712: fix use after free bugs > 01fd7e12f8fb serial: fsl_lpuart: RS485 RTS polariy is inverse > 839ca7969fcf soundwire: qcom: fix device status array range > fdc69b070071 net/smc: Remove redundant refcount increase > 6ce0d73b2fbd Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming > enqueued skb" > aca9d0acda9e tcp: annotate data-race around challenge_timestamp > 1c472d671d9c sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued > skb > 55fb8c3baa80 kcm: fix strp_init() order and cleanup > 660df4411ef4 mlxbf_gige: compute MDIO period based on i1clk > a4c08cbfbcf9 ethernet: rocker: fix sleep in atomic context bug in > neigh_timer_handler > a420d5872601 net/sched: fix netdevice reference leaks in > attach_default_qdiscs() > ce881ddbdc02 net: sched: tbf: don't call qdisc_put() while holding tree > lock > d6ec2f711c94 net: dsa: xrs700x: Use irqsave variant for u64 stats update > ca54b2bfaab3 openvswitch: fix memory leak at failed datapath creation > 8eeba7ef4d1d net: smsc911x: Stop and start PHY during suspend and resume > cc2b9170aa34 net: sparx5: fix handling uneven length packets in manual > extraction > 5359524251d2 Revert "xhci: turn off port power in shutdown" > ee19bbed4b03 wifi: cfg80211: debugfs: fix return type in > ht40allow_map_read() > 20b2d5be85e9 ALSA: hda: intel-nhlt: Correct the handling of fmt_config > flexible array > 59a711467e8d ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg > 7828b5d0080a drm/i915/display: avoid warnings when registering dual panel > backlight > 630ab29120b5 drm/i915/backlight: extract backlight code to a separate file > 9f8558c5c642 ieee802154/adf7242: defer destroy_workqueue call > 222bd95c89b1 bpf, cgroup: Fix kernel BUG in purge_effective_progs > 1c518476ceb4 bpf: Restrict bpf_sys_bpf to CAP_PERFMON > de22cba333d8 skmsg: Fix wrong last sg check in sk_msg_recvmsg() > 7497f9766f08 iio: adc: mcp3911: make use of the sign bit > 9e1f74294d53 platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask > 1a785b435276 drm/msm/dsi: Fix number of regulators for SDM660 > ab8533946db7 drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg > 0a4f633548c4 drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4 > e8bd54b0664b drm/msm/dsi: fix the inconsistent indenting > > Signed-off-by: Bruce Ashfield <bruce.ashfi...@gmail.com> > --- > .../linux/linux-yocto-rt_5.15.bb | 6 ++--- > .../linux/linux-yocto-tiny_5.15.bb | 6 ++--- > meta/recipes-kernel/linux/linux-yocto_5.15.bb | 26 +++++++++---------- > 3 files changed, 19 insertions(+), 19 deletions(-) > > diff --git a/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > b/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > index 1144cf1bfd..65a0b5c5a4 100644 > --- a/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > +++ b/meta/recipes-kernel/linux/linux-yocto-rt_5.15.bb > @@ -11,13 +11,13 @@ python () { > raise bb.parse.SkipRecipe("Set PREFERRED_PROVIDER_virtual/kernel to > linux-yocto-rt to enable it") > } > > -SRCREV_machine ?= "4c435c4647d58aa41f423efb1fc461dafc70b619" > -SRCREV_meta ?= "cbf9741b1cbc3e22bbe17f4e20920df4f46eb4d3" > +SRCREV_machine ?= "98f38e83ef2d2b00de16c507c308bd806661a53f" > +SRCREV_meta ?= "81c59906067bcb77841113c76daad85fb94688d6" > > SRC_URI = > "git://git.yoctoproject.org/linux-yocto.git;branch=${KBRANCH};name=machine \ > > git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-5.15;destsuffix=${KMETA}" > > -LINUX_VERSION ?= "5.15.65" > +LINUX_VERSION ?= "5.15.68" > > LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > diff --git a/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > b/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > index a9f32bd5d5..358501fc2e 100644 > --- a/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > +++ b/meta/recipes-kernel/linux/linux-yocto-tiny_5.15.bb > @@ -5,7 +5,7 @@ KCONFIG_MODE = "--allnoconfig" > > require recipes-kernel/linux/linux-yocto.inc > > -LINUX_VERSION ?= "5.15.65" > +LINUX_VERSION ?= "5.15.68" > LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > DEPENDS += "${@bb.utils.contains('ARCH', 'x86', 'elfutils-native', '', d)}" > @@ -14,8 +14,8 @@ DEPENDS += "openssl-native util-linux-native" > KMETA = "kernel-meta" > KCONF_BSP_AUDIT_LEVEL = "2" > > -SRCREV_machine ?= "27747392d509aa1562545466cfecb627557676b2" > -SRCREV_meta ?= "cbf9741b1cbc3e22bbe17f4e20920df4f46eb4d3" > +SRCREV_machine ?= "35d0c78ae3efd6fe1c4fcbf4c8b0d7f43fc2aff7" > +SRCREV_meta ?= "81c59906067bcb77841113c76daad85fb94688d6" > > PV = "${LINUX_VERSION}+git${SRCPV}" > > diff --git a/meta/recipes-kernel/linux/linux-yocto_5.15.bb > b/meta/recipes-kernel/linux/linux-yocto_5.15.bb > index cbe3f0b0dc..3b4eb4d844 100644 > --- a/meta/recipes-kernel/linux/linux-yocto_5.15.bb > +++ b/meta/recipes-kernel/linux/linux-yocto_5.15.bb > @@ -13,24 +13,24 @@ KBRANCH:qemux86 ?= "v5.15/standard/base" > KBRANCH:qemux86-64 ?= "v5.15/standard/base" > KBRANCH:qemumips64 ?= "v5.15/standard/mti-malta64" > > -SRCREV_machine:qemuarm ?= "86cc7ffeba75d76077270ba98ff84cb48b7134ca" > -SRCREV_machine:qemuarm64 ?= "9ce45e4f8bd9fcccbee7e97873753a8a9ea49ba6" > -SRCREV_machine:qemumips ?= "c82ae040723f1c19c76d1ae263945b46af2a58fb" > -SRCREV_machine:qemuppc ?= "4b4bfed43fcd28ddaa55d518f56dd35dc66286d3" > -SRCREV_machine:qemuriscv64 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > -SRCREV_machine:qemuriscv32 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > -SRCREV_machine:qemux86 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > -SRCREV_machine:qemux86-64 ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > -SRCREV_machine:qemumips64 ?= "f165a8d9cead8022974a88435c9ca4e69c697be9" > -SRCREV_machine ?= "9399d814f017335d9b8e310bcd4000c0722619fc" > -SRCREV_meta ?= "cbf9741b1cbc3e22bbe17f4e20920df4f46eb4d3" > +SRCREV_machine:qemuarm ?= "1e5a26d496c1671b38474e191bb748a47dc7dc59" > +SRCREV_machine:qemuarm64 ?= "e4f332a5c08ddebbd1a36cff5270e5eebe278cf4" > +SRCREV_machine:qemumips ?= "4dd7bbdb60c07d2861468a9c8545ac9e97ba400d" > +SRCREV_machine:qemuppc ?= "c1ddaa69dd463a11645cc5362a3200dbce28d664" > +SRCREV_machine:qemuriscv64 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > +SRCREV_machine:qemuriscv32 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > +SRCREV_machine:qemux86 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > +SRCREV_machine:qemux86-64 ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > +SRCREV_machine:qemumips64 ?= "481a521e65375aeef6b8903c8df6fc2b23a184b8" > +SRCREV_machine ?= "c9162b76e4f4dad76ff499cf427f45f3383b8a57" > +SRCREV_meta ?= "81c59906067bcb77841113c76daad85fb94688d6" > > # set your preferred provider of linux-yocto to 'linux-yocto-upstream', and > you'll > # get the <version>/base branch, which is pure upstream -stable, and the same > # meta SRCREV as the linux-yocto-standard builds. Select your version using > the > # normal PREFERRED_VERSION settings. > BBCLASSEXTEND = "devupstream:target" > -SRCREV_machine:class-devupstream ?= > "633c3b4c71bb949de771388de213d331c1ebd270" > +SRCREV_machine:class-devupstream ?= > "dd20085f2a88b6cdb12bdcdbd2d7a761c86b184a" > PN:class-devupstream = "linux-yocto-upstream" > KBRANCH:class-devupstream = "v5.15/base" > > @@ -38,7 +38,7 @@ SRC_URI = > "git://git.yoctoproject.org/linux-yocto.git;name=machine;branch=${KBRA > > git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=meta;branch=yocto-5.15;destsuffix=${KMETA}" > > LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > -LINUX_VERSION ?= "5.15.65" > +LINUX_VERSION ?= "5.15.68" > > DEPENDS += "${@bb.utils.contains('ARCH', 'x86', 'elfutils-native', '', d)}" > DEPENDS += "openssl-native util-linux-native" > -- > 2.19.1 > > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#171004): https://lists.openembedded.org/g/openembedded-core/message/171004 Mute This Topic: https://lists.openembedded.org/mt/93782013/21656 Group Owner: openembedded-core+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
