Richard already reported these via IRC this morning. No need to open a bug for them, I've already taken care of things.
Bruce On Mon, Apr 19, 2021 at 11:06 PM Saini, Naveen Kumar <naveen.kumar.sa...@intel.com> wrote: > > [SWAT] > > Kernel config warnings for 'n1sdp' machine from meta-arm build: > https://autobuilder.yoctoproject.org/typhoon/#/builders/113/builds/911/steps/12/logs/stdio > > WARNING: linux-yocto-5.10.30+gitAUTOINC+b7125842b7_8465e471f5-r0 > do_kernel_configcheck: [kernel config]: specified values did not make it into > the kernel's final configuration: > > [NOTE]: 'CONFIG_ACPI_APEI_PCIEAER' last val (y) and .config val (n) do > not match > [INFO]: CONFIG_ACPI_APEI_PCIEAER : n > [INFO]: raw config text: > > config ACPI_APEI_PCIEAER > bool "APEI PCIe AER logging/recovering support" > depends on ACPI_APEI && PCIEAER && ACPI > help > PCIe AER errors may be reported via APEI firmware first > mode. > Turn on this option to enable the corresponding support. > > Config 'ACPI_APEI_PCIEAER' has the following Direct dependencies > (ACPI_APEI_PCIEAER=n): > ACPI_APEI(=y) && PCIEAER(=n) && ACPI(=y) > Parent dependencies are: > PCIEAER [n] ACPI [y] ACPI_APEI [y] > [INFO]: config 'CONFIG_ACPI_APEI_PCIEAER' was set, but it wasn't > assignable, check (parent) dependencies > > > [NOTE]: 'CONFIG_BT_HCIBTUSB' last val (m) and .config val (n) do not match > [INFO]: CONFIG_BT_HCIBTUSB : n > [INFO]: raw config text: > > config BT_HCIBTUSB > tristate "HCI USB driver" > select BT_INTEL > depends on USB && BT && NET > help > Bluetooth HCI USB driver. > This driver is required if you want to use Bluetooth > devices with > USB interface. > > Say Y here to compile support for Bluetooth USB devices > into the > kernel or say M to compile it as module (btusb). > > Config 'BT_HCIBTUSB' has the following Direct dependencies > (BT_HCIBTUSB=n): > USB(=y) && BT(=n) && NET(=y) > Parent dependencies are: > BT [n] USB [y] NET [y] > [INFO]: config 'CONFIG_BT_HCIBTUSB' was set, but it wasn't assignable, > check (parent) dependencies > > > [NOTE]: 'CONFIG_BT_HCIUART' last val (m) and .config val (n) do not match > [INFO]: CONFIG_BT_HCIUART : n > [INFO]: raw config text: > > config BT_HCIUART > tristate "HCI UART driver" > depends on (SERIAL_DEV_BUS || !SERIAL_DEV_BUS) && (NVMEM || > !NVMEM) && TTY && BT && NET > help > Bluetooth HCI UART driver. > This driver is required if you want to use Bluetooth > devices with > serial port interface. You will also need this driver if > you have > UART based Bluetooth PCMCIA and CF devices like Xircom > Credit Card > adapter and BrainBoxes Bluetooth PC Card. > > Say Y here to compile support for Bluetooth UART devices > into the > kernel or say M to compile it as module (hci_uart). > > Config 'BT_HCIUART' has the following Direct dependencies > (BT_HCIUART=n): > SERIAL_DEV_BUS(=y) || !SERIAL_DEV_BUS(=y) (=y) && NVMEM(=y) > || !NVMEM(=y) (=y) && TTY(=y) && BT(=n) && NET(=y) > Parent dependencies are: > BT [n] NVMEM [y] TTY [y] NET [y] SERIAL_DEV_BUS [y] > [INFO]: config 'CONFIG_BT_HCIUART' was set, but it wasn't assignable, > check (parent) dependencies > > > [NOTE]: 'CONFIG_BT_HCIUART_LL' last val (y) and .config val (n) do not > match > [INFO]: CONFIG_BT_HCIUART_LL : n > [INFO]: raw config text: > > config BT_HCIUART_LL > bool "HCILL protocol support" > select BT_HCIUART_H4 > depends on BT_HCIUART_SERDEV && BT && NET > help > HCILL (HCI Low Level) is a serial protocol for communication > between Bluetooth device and host. This protocol is > required for > serial Bluetooth devices that are based on Texas > Instruments' > BRF chips. > > Say Y here to compile support for HCILL protocol. > > Config 'BT_HCIUART_LL' has the following Direct dependencies > (BT_HCIUART_LL=n): > BT_HCIUART_SERDEV(=n) && BT(=n) && NET(=y) > Parent dependencies are: > BT_HCIUART_SERDEV [n] BT [n] NET [y] > [INFO]: config 'CONFIG_BT_HCIUART_LL' was set, but it wasn't assignable, > check (parent) dependencies > > > [NOTE]: 'CONFIG_BT_HCIUART_BCM' last val (y) and .config val (n) do not > match > [INFO]: CONFIG_BT_HCIUART_BCM : n > [INFO]: raw config text: > > config BT_HCIUART_BCM > bool "Broadcom protocol support" > select BT_HCIUART_H4 > select BT_BCM > depends on BT_HCIUART && BT_HCIUART_SERDEV && (!ACPI || > SERIAL_DEV_CTRL_TTYPORT) && GPIOLIB && BT && NET > help > The Broadcom protocol support enables Bluetooth HCI over > serial > port interface for Broadcom Bluetooth controllers. > > Say Y here to compile support for Broadcom protocol. > > Config 'BT_HCIUART_BCM' has the following Direct dependencies > (BT_HCIUART_BCM=n): > BT_HCIUART(=n) && BT_HCIUART_SERDEV(=n) && !ACPI(=y) || > SERIAL_DEV_CTRL_TTYPORT(=y) (=y) && GPIOLIB(=y) && BT(=n) && NET(=y) > Parent dependencies are: > BT [n] ACPI [y] BT_HCIUART [n] GPIOLIB [y] NET [y] > BT_HCIUART_SERDEV [n] SERIAL_DEV_CTRL_TTYPORT [y] > [INFO]: config 'CONFIG_BT_HCIUART_BCM' was set, but it wasn't assignable, > check (parent) dependencies > > > [NOTE]: 'CONFIG_BT_HCIUART_QCA' last val (y) and .config val (n) do not > match > [INFO]: CONFIG_BT_HCIUART_QCA : n > [INFO]: raw config text: > > config BT_HCIUART_QCA > bool "Qualcomm Atheros protocol support" > select BT_HCIUART_H4 > select BT_QCA > depends on BT_HCIUART && BT_HCIUART_SERDEV && BT && NET > help > The Qualcomm Atheros protocol supports HCI In-Band Sleep > feature > over serial port interface(H4) between controller and host. > This protocol is required for UART clock control for QCA > Bluetooth > devices. > > Say Y here to compile support for QCA protocol. > > Config 'BT_HCIUART_QCA' has the following Direct dependencies > (BT_HCIUART_QCA=n): > BT_HCIUART(=n) && BT_HCIUART_SERDEV(=n) && BT(=n) && NET(=y) > Parent dependencies are: > BT [n] BT_HCIUART [n] NET [y] BT_HCIUART_SERDEV [n] > [INFO]: config 'CONFIG_BT_HCIUART_QCA' was set, but it wasn't assignable, > check (parent) dependencies > > > [NOTE]: 'CONFIG_LEGACY_PTY_COUNT' last val (16) and .config val (n) do > not match > [INFO]: CONFIG_LEGACY_PTY_COUNT : n > [INFO]: raw config text: > > config LEGACY_PTY_COUNT > int "Maximum number of legacy PTY in use" > range 0 256 > default "256" > depends on LEGACY_PTYS && TTY > help > The maximum number of legacy PTYs that can be used at any > one time. > The default is 256, and should be more than enough. > Embedded > systems may want to reduce this to save memory. > > When not in use, each legacy PTY occupies 12 bytes on 32-bit > architectures and 24 bytes on 64-bit architectures. > > Config 'LEGACY_PTY_COUNT' has the following Direct dependencies > (LEGACY_PTY_COUNT=n): > LEGACY_PTYS(=n) && TTY(=y) > Parent dependencies are: > 256 [256] TTY [y] LEGACY_PTYS [n] 256 [256] 0 [0] > [INFO]: config 'CONFIG_LEGACY_PTY_COUNT' was set, but it wasn't > assignable, check (parent) dependencies > > > > > > > > > -----Original Message----- > > From: openembedded-core@lists.openembedded.org <openembedded- > > c...@lists.openembedded.org> On Behalf Of Bruce Ashfield > > Sent: Monday, April 19, 2021 8:07 AM > > To: richard.pur...@linuxfoundation.org > > Cc: openembedded-core@lists.openembedded.org > > Subject: [OE-core] [PATCH 08/10] linux-yocto/5.10: update to v5.10.30 > > > > From: Bruce Ashfield <bruce.ashfi...@gmail.com> > > > > Updating linux-yocto/5.10 to the latest korg -stable release that comprises > > the following commits: > > > > 1e798745fa8e Linux 5.10.30 > > b451aed56348 Revert "net: sched: bump refcount for new action in ACT > > replace mode" > > a22115c3492f net: ieee802154: stop dump llsec params for monitors > > f872fb3feadd net: ieee802154: forbid monitor for del llsec seclevel > > a933bcbb1f7f net: ieee802154: forbid monitor for set llsec params > > 0238c7b47f77 net: ieee802154: fix nl802154 del llsec devkey > > d06a96e72803 net: ieee802154: fix nl802154 add llsec key > > 399f38c420ee net: ieee802154: fix nl802154 del llsec dev > > 07699fcce052 net: ieee802154: fix nl802154 del llsec key > > 8bfb45fa131d net: ieee802154: nl-mac: fix check on panid > > 38731bbcd9f0 net: mac802154: Fix general protection fault > > 9f51a42d81f6 drivers: net: fix memory leak in peak_usb_create_dev > > 160ac0d55d52 drivers: net: fix memory leak in atusb_probe > > 4d9117b7404a net: tun: set tun->dev->addr_len during TUNSETLINK > > processing > > 26ab092615f5 cfg80211: remove WARN_ON() in cfg80211_sme_connect > > 138a6e1dc35e gpiolib: Read "gpio-line-names" from a firmware node > > 300368c59cf0 net: sched: bump refcount for new action in ACT replace > > mode > > 982dd14fba0f dt-bindings: net: ethernet-controller: fix typo in NVMEM > > c65a000a236e lockdep: Address clang -Wformat warning printing for %hd > > 4c4aa344edf4 clk: socfpga: fix iomem pointer cast on 64-bit > > 674ddb52f94b RAS/CEC: Correct ce_add_elem()'s returned values > > 253acf2e983b vdpa/mlx5: Fix wrong use of bit numbers > > 0ddb34c2ccce vdpa/mlx5: should exclude header length and fcs from mtu > > 5700c3d4abb2 RDMA/addr: Be strict with gid size > > e53ff6e59144 i40e: Fix parameters in aq_get_phy_register() > > 999852207464 drm/vc4: crtc: Reduce PV fifo threshold on hvs4 > > d8a0861e269d RDMA/qedr: Fix kernel panic when trying to access recv_cq > > 3fa7ae3f3754 perf report: Fix wrong LBR block sorting > > 7f40e9332898 RDMA/cxgb4: check for ipv6 address properly while > > destroying listener > > 03ad6a2521a0 net/mlx5: Fix PBMC register mapping > > 1312f11eb33d net/mlx5: Fix PPLM register mapping > > f92faf0bdd25 net/mlx5: Fix placement of log_max_flow_counter > > f780a0808827 net: hns3: clear VF down state bit before request link > > status > > f473789db536 tipc: increment the tmp aead refcnt before attaching it > > 3292c4fc9ce2 can: mcp251x: fix support for half duplex SPI host > > controllers > > a96f1ed70927 iwlwifi: fix 11ax disabled bit in the regulatory > > capability flags > > 363d610a9652 i2c: designware: Adjust bus_freq_hz when refuse high > > speed mode set > > cc5418973cc9 openvswitch: fix send of uninitialized stack memory in ct > > limit > > reply > > 3e288c3a7d55 net: openvswitch: conntrack: simplify the return expression > > of ovs_ct_limit_get_default_limit() > > 3b70c6f26364 perf inject: Fix repipe usage > > d9dc1b406cb9 s390/cpcmd: fix inline assembly register clobbering > > 7943f749f0d2 workqueue: Move the position of debug_work_activate() in > > __queue_work() > > b3f29ed5dd4b clk: fix invalid usage of list cursor in unregister > > 2307baac56af clk: fix invalid usage of list cursor in register > > d9c55b2d3368 net: macb: restore cmp registers on resume path > > af36da5becfb net: cls_api: Fix uninitialised struct field bo- > > >unlocked_driver_cb > > ffd5f1e87c15 scsi: ufs: core: Fix wrong Task Tag used in task management > > request UPIUs > > ff9231ddfec8 scsi: ufs: core: Fix task management request completion > > timeout > > 71ee255d0698 mptcp: forbit mcast-related sockopt on MPTCP sockets > > 24bbfe89b1c7 net: udp: Add support for getsockopt(..., ..., UDP_GRO, > > ..., > > ...); > > a08d5d3bec53 drm/msm: Set drvdata to NULL when msm_drm_init() fails > > 7290bf419894 RDMA/rtrs-clt: Close rtrs client conn before destroying > > rtrs clt > > session files > > 49cfa2b20193 i40e: Fix display statistics for veb_tc > > e8c96b57a781 soc/fsl: qbman: fix conflicting alignment attributes > > 553290002aa8 xdp: fix xdp_return_frame() kernel BUG throw for > > page_pool memory model > > 4cfae7b23889 net/rds: Fix a use after free in rds_message_map_pages > > 05bbe9d85a4c net/mlx5: Don't request more than supported EQs > > 86530effd18f net/mlx5e: Fix ethtool indication of connector type > > bde64eac2379 net/mlx5e: Fix mapping of ct_label zero > > d65b66ca3334 ASoC: sunxi: sun4i-codec: fill ASoC card owner > > dcdf0876b040 I2C: JZ4780: Fix bug for Ingenic X1000. > > f295dfc831bc net: phy: broadcom: Only advertise EEE for supported modes > > 7a896e189361 nfp: flower: ignore duplicate merge hints from FW > > 6af631d1caf2 net: qrtr: Fix memory leak on qrtr_tx_wait failure > > dfe7805e6aa6 net/ncsi: Avoid channel_monitor hrtimer deadlock > > ae4a8d10ac8b ARM: dts: imx6: pbab01: Set vmmc supply for both SD > > interfaces > > e5e5ecc9d9fd net:tipc: Fix a double free in tipc_sk_mcast_rcv > > f273e3726e14 cxgb4: avoid collecting SGE_QBASE regs during traffic > > 63a64c366ce0 net: dsa: Fix type was not set for devlink port > > ed613d96842e gianfar: Handle error code at MAC address change > > 1eb5f4e00755 ethernet: myri10ge: Fix a use after free in myri10ge_sw_tso > > 759b44d247c6 mlxsw: spectrum: Fix ECN marking in tunnel decapsulation > > d02b68a92905 can: isotp: fix msg_namelen values depending on > > CAN_REQUIRED_SIZE > > 1d3837ca7335 can: bcm/raw: fix msg_namelen values depending on > > CAN_REQUIRED_SIZE > > 58f8f1074039 xfrm: Provide private skb extensions for segmented and hw > > offloaded ESP packets > > bc0b89a9a28f arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 > > d9670f5e77e5 drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit > > d38bce5adcd9 sch_red: fix off-by-one checks in red_check_params() > > 985c9bb1b594 geneve: do not modify the shared tunnel info when PMTU > > triggers an ICMP reply > > f3bc1885746f vxlan: do not modify the shared tunnel info when PMTU > > triggers an ICMP reply > > f33f79703a4e amd-xgbe: Update DMA coherency values > > e5a3449ce16a hostfs: fix memory handling in follow_link() > > 3cc4db1213a4 i40e: Fix kernel oops when i40e driver removes VF's > > 9856607c9c29 i40e: Added Asym_Pause to supported link modes > > d4d4c6a4ca7c virtchnl: Fix layout of RSS structures > > 95d58bf5ed43 xfrm: Fix NULL pointer dereference on policy lookup > > 48a443026bb6 ASoC: wm8960: Fix wrong bclk and lrclk with pll enabled for > > some chips > > f6db9dbfa6b6 ASoC: SOF: Intel: HDA: fix core status verification > > ef4ddd1d6d93 esp: delete NETIF_F_SCTP_CRC bit from features for esp > > offload > > 0224432a8fc1 net: xfrm: Localize sequence counter per network > > namespace > > 1e6a3b41cf2a ARM: OMAP4: PM: update ROM return address for OSWR > > and OFF > > 042b2cad81de ARM: OMAP4: Fix PMIC voltage domains for bionic > > 1f51cb88e788 regulator: bd9571mwv: Fix AVS and DVFS voltage range > > b267688ce007 remoteproc: qcom: pil_info: avoid 64-bit division > > c7a175a24b0e xfrm: Use actual socket sk instead of skb socket for > > xfrm_output_resume > > 3b74ce529ece xfrm: interface: fix ipv4 pmtu check to honor ip header df > > 2d62d6980c2b ice: Recognize 860 as iSCSI port in CEE mode > > fd92e7aacc16 ice: Refactor DCB related variables out of the > > ice_port_info > > struct > > 4a78ae127803 net: sched: fix err handler in tcf_action_init() > > 3c7d3d188ca7 KVM: x86/mmu: preserve pending TLB flush across calls to > > kvm_tdp_mmu_zap_sp > > 25fc773b21ce KVM: x86/mmu: Don't allow TDP MMU to yield when > > recovering NX pages > > be2c527b5d39 KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU > > during NX zapping > > 0aa4dd9e5132 KVM: x86/mmu: Ensure TLBs are flushed when yielding > > during GFN range zap > > 3c7a18440638 KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES > > changed > > 85f4ff2b06af KVM: x86/mmu: Ensure forward progress when yielding in > > TDP MMU iter > > 1cd17c5c9b8a KVM: x86/mmu: Rename goal_gfn to next_last_level_gfn > > b4a3a0d27924 KVM: x86/mmu: Merge flush and non-flush > > tdp_mmu_iter_cond_resched > > 8f90432d7f59 KVM: x86/mmu: change TDP MMU yield function returns to > > match cond_resched > > 5ea9e6038d29 i2c: turn recovery error on init to debug > > efa869b68be9 percpu: make pcpu_nr_empty_pop_pages per chunk type > > c441949184a9 scsi: target: iscsi: Fix zero tag inside a trace event > > d8e7fa8509d7 scsi: pm80xx: Fix chip initialization failure > > 0c47d8a55f7f driver core: Fix locking bug in > > deferred_probe_timeout_work_func() > > f06cb4641b15 usbip: synchronize event handler with sysfs code paths > > 28dc9237fe83 usbip: vudc synchronize sysfs code paths > > 513765b186c9 usbip: stub-dev synchronize sysfs code paths > > 68be610c19a5 usbip: add sysfs_lock to synchronize sysfs code paths > > 126ce97d39cf thunderbolt: Fix off by one in tb_port_find_retimer() > > 256ece954961 thunderbolt: Fix a leak in tb_retimer_add() > > b830650c1a0c net: let skb_orphan_partial wake-up waiters. > > 5d9216b85100 net-ipv6: bugfix - raw & sctp - switch to > > ipv6_can_nonlocal_bind() > > b82816d77875 net: hsr: Reset MAC header for Tx path > > 9b9c910ccc19 mac80211: fix TXQ AC confusion > > cc357c29358d mac80211: fix time-is-after bug in mlme > > cc1a702e6ec0 cfg80211: check S1G beacon compat element length > > fea52345f422 nl80211: fix potential leak of ACL params > > 42e4450e3790 nl80211: fix beacon head validation > > 81692c6add7e net: sched: fix action overwrite reference counting > > cdcf3829f418 net: sched: sch_teql: fix null-pointer dereference > > 422eda625516 vdpa/mlx5: Fix suspend/resume index restoration > > 89e406e95278 i40e: Fix sparse errors in i40e_txrx.c > > 12e1438a0946 i40e: Fix sparse error: uninitialized symbol 'ring' > > 2472ba1c46b4 i40e: Fix sparse error: 'vsi->netdev' could be null > > 792387118204 i40e: Fix sparse warning: missing error code 'err' > > f0b4c9acf5fe net: ensure mac header is set in virtio_net_hdr_to_skb() > > 72c5de25ba83 bpf, sockmap: Fix incorrect fwd_alloc accounting > > 00c01de1a994 bpf, sockmap: Fix sk->prot unhash op reset > > d921baabd964 bpf: Refcount task stack in bpf_get_task_stack > > caef7806141a libbpf: Only create rx and tx XDP rings when necessary > > 4cc9177b099e libbpf: Restore umem state after socket create failure > > 5aa7df172207 libbpf: Ensure umem pointer is non-NULL before > > dereferencing > > b52e88638f71 ethernet/netronome/nfp: Fix a use after free in > > nfp_bpf_ctrl_msg_rx > > d86046a77535 bpf: link: Refuse non-O_RDWR flags in BPF_OBJ_GET > > b7004ecafade bpf: Enforce that struct_ops programs be GPL-only > > 3015db3de715 libbpf: Fix bail out from 'ringbuf_process_ring()' on error > > dc195928d7e4 net: hso: fix null-ptr-deref during tty device > > unregistration > > c2743e0a631c ice: fix memory leak of aRFS after resuming from suspend > > 6bd4e822925d iwlwifi: pcie: properly set LTR workarounds on 22000 > > devices > > e5386e87f8aa ice: Cleanup fltr list in case of allocation issues > > 9d1c342c5018 ice: Use port number instead of PF ID for WoL > > b69686110291 ice: Fix for dereference of NULL pointer > > 4d73a6143d40 ice: remove DCBNL_DEVRESET bit from PF state > > 286830a8469c ice: fix memory allocation call > > 4686a26e9536 ice: prevent ice_open and ice_stop during reset > > ef7ed8c77d1c ice: Increase control queue timeout > > 6590b7bfbc2b ice: Continue probe on link/PHY errors > > 9a7bc0c40367 batman-adv: initialize "struct batadv_tvlv_tt_vlan_data"- > > >reserved field > > d1173effc574 ARM: dts: turris-omnia: configure LED[2]/INTn pin as > > interrupt pin > > 4941889535f3 parisc: avoid a warning on u8 cast for cmpxchg on u8 > > pointers > > 597121792eb4 parisc: parisc-agp requires SBA IOMMU driver > > 9b54dad28def of: property: fw_devlink: do not link ".*,nr-gpios" > > 009c5665278b ethtool: fix incorrect datatype in set_eee ops > > 3a675c1b507f fs: direct-io: fix missing sdio->boundary > > b1a5122554ae ocfs2: fix deadlock between setattr and dio_end_io_write > > 4fabcf229477 nds32: flush_dcache_page: use page_mapping_file to avoid > > races with swapoff > > 7d9da660affc ia64: fix user_stack_pointer() for ptrace() > > 8e5bfafedf6d gcov: re-fix clang-11+ support > > 43908139368e LOOKUP_MOUNTPOINT: we are cleaning "jumped" flag too > > late > > de427b662bfb IB/hfi1: Fix probe time panic when AIP is enabled with a > > buggy BIOS > > 856f60e3e800 ACPI: processor: Fix build when > > CONFIG_ACPI_PROCESSOR=m > > 8599a39adca8 drm/i915: Fix invalid access to ACPI _DSM objects > > bf991df9535e net: dsa: lantiq_gswip: Configure all remaining > > GSWIP_MII_CFG bits > > c4ae852ec940 net: dsa: lantiq_gswip: Don't use PHY auto polling > > ba39959bfebd net: dsa: lantiq_gswip: Let GSWIP automatically set the > > xMII > > clock > > 40375bc3d0f9 net: ipv6: check for validity before dereferencing cfg- > > >fc_nlinfo.nlh > > 005c5afa9f85 xen/evtchn: Change irq_info lock to raw_spinlock_t > > a28124e8ad03 selinux: fix race between old and new sidtab > > fd75d73aa214 selinux: fix cond_list corruption when changing booleans > > 4f29b08e238f selinux: make nslot handling in avtab more robust > > a12a2fa9a129 nfc: Avoid endless loops caused by repeated > > llcp_sock_connect() > > 568ac94df580 nfc: fix memory leak in llcp_sock_connect() > > 99b596199e84 nfc: fix refcount leak in llcp_sock_connect() > > 6fb003e5ae18 nfc: fix refcount leak in llcp_sock_bind() > > 117557711974 ASoC: intel: atom: Stop advertising non working S24LE > > support > > c4a6fb0e8389 ALSA: hda/conexant: Apply quirk for another HP ZBook G5 > > model > > 6c9119de7ffe ALSA: hda/realtek: Fix speaker amp setup on Acer Aspire E1 > > 6efe4c1f4d17 ALSA: aloop: Fix initialization of controls > > 4c933ff31f21 xfrm/compat: Cleanup WARN()s that can be user-triggered > > > > Signed-off-by: Bruce Ashfield <bruce.ashfi...@gmail.com> > > --- > > .../linux/linux-yocto-rt_5.10.bb | 6 ++--- > > .../linux/linux-yocto-tiny_5.10.bb | 8 +++---- > > meta/recipes-kernel/linux/linux-yocto_5.10.bb | 24 +++++++++---------- > > 3 files changed, 19 insertions(+), 19 deletions(-) > > > > diff --git a/meta/recipes-kernel/linux/linux-yocto-rt_5.10.bb > > b/meta/recipes-kernel/linux/linux-yocto-rt_5.10.bb > > index ce88554830..b22eb94e41 100644 > > --- a/meta/recipes-kernel/linux/linux-yocto-rt_5.10.bb > > +++ b/meta/recipes-kernel/linux/linux-yocto-rt_5.10.bb > > @@ -11,13 +11,13 @@ python () { > > raise bb.parse.SkipRecipe("Set PREFERRED_PROVIDER_virtual/kernel to > > linux-yocto-rt to enable it") } > > > > -SRCREV_machine ?= "a1cb83d2e69b4c895cefa0e8716c8e9021d757bf" > > -SRCREV_meta ?= "6dbb20d3127b3380779a11b1552429c5d4a0417e" > > +SRCREV_machine ?= "60ca2b8c07383a2d46fef1b668e34dff90c1b404" > > +SRCREV_meta ?= "b7125842b7ce188e7846a49fcb15a71c54806d6c" > > > > SRC_URI = "git://git.yoctoproject.org/linux- > > yocto.git;branch=${KBRANCH};name=machine \ > > git://git.yoctoproject.org/yocto-kernel- > > cache;type=kmeta;name=meta;branch=yocto-5.10;destsuffix=${KMETA}" > > > > -LINUX_VERSION ?= "5.10.29" > > +LINUX_VERSION ?= "5.10.30" > > > > LIC_FILES_CHKSUM = > > "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > > > diff --git a/meta/recipes-kernel/linux/linux-yocto-tiny_5.10.bb > > b/meta/recipes-kernel/linux/linux-yocto-tiny_5.10.bb > > index 3581f3b4b0..54575a7917 100644 > > --- a/meta/recipes-kernel/linux/linux-yocto-tiny_5.10.bb > > +++ b/meta/recipes-kernel/linux/linux-yocto-tiny_5.10.bb > > @@ -6,7 +6,7 @@ KCONFIG_MODE = "--allnoconfig" > > > > require recipes-kernel/linux/linux-yocto.inc > > > > -LINUX_VERSION ?= "5.10.29" > > +LINUX_VERSION ?= "5.10.30" > > LIC_FILES_CHKSUM = > > "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > > > DEPENDS += "${@bb.utils.contains('ARCH', 'x86', 'elfutils-native', '', d)}" > > @@ -15,9 +15,9 @@ DEPENDS += "openssl-native util-linux-native" > > KMETA = "kernel-meta" > > KCONF_BSP_AUDIT_LEVEL = "2" > > > > -SRCREV_machine_qemuarm ?= > > "bbc9efbcc604d823555794878f966b2ad7e5f4ca" > > -SRCREV_machine ?= "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_meta ?= "6dbb20d3127b3380779a11b1552429c5d4a0417e" > > +SRCREV_machine_qemuarm ?= > > "ee7efde0c94e8b2eba1a5a2709f2d21874ac7525" > > +SRCREV_machine ?= "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_meta ?= "b7125842b7ce188e7846a49fcb15a71c54806d6c" > > > > PV = "${LINUX_VERSION}+git${SRCPV}" > > > > diff --git a/meta/recipes-kernel/linux/linux-yocto_5.10.bb b/meta/recipes- > > kernel/linux/linux-yocto_5.10.bb > > index 278f8a67fe..e93e41c69b 100644 > > --- a/meta/recipes-kernel/linux/linux-yocto_5.10.bb > > +++ b/meta/recipes-kernel/linux/linux-yocto_5.10.bb > > @@ -13,17 +13,17 @@ KBRANCH_qemux86 ?= "v5.10/standard/base" > > KBRANCH_qemux86-64 ?= "v5.10/standard/base" > > KBRANCH_qemumips64 ?= "v5.10/standard/mti-malta64" > > > > -SRCREV_machine_qemuarm ?= > > "13b4e1548d504dca91ff49abba5be4df728840e6" > > -SRCREV_machine_qemuarm64 ?= > > "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_machine_qemumips ?= > > "ba6c1c115792e0c80412a7e0b54d6003cfbed491" > > -SRCREV_machine_qemuppc ?= > > "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_machine_qemuriscv64 ?= > > "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_machine_qemuriscv32 ?= > > "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_machine_qemux86 ?= > > "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_machine_qemux86-64 ?= > > "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_machine_qemumips64 ?= > > "2e99735de1312c0403ff23cb0c50fa8153e80be7" > > -SRCREV_machine ?= "fd21e2d609ad3343f03d78bc0cbce8da7d7c2a57" > > -SRCREV_meta ?= "6dbb20d3127b3380779a11b1552429c5d4a0417e" > > +SRCREV_machine_qemuarm ?= > > "4f13e8499f2bfc9d95dcc70b981ea16351ff088b" > > +SRCREV_machine_qemuarm64 ?= > > "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_machine_qemumips ?= > > "64f8949180b1a6375abef20eebf735e853701c71" > > +SRCREV_machine_qemuppc ?= > > "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_machine_qemuriscv64 ?= > > "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_machine_qemuriscv32 ?= > > "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_machine_qemux86 ?= > > "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_machine_qemux86-64 ?= > > "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_machine_qemumips64 ?= > > "6bf49ed9b223173d918b7c0140b8d0561bc2674c" > > +SRCREV_machine ?= "8465e471f5b4855d01012a18cd5fa516061c0358" > > +SRCREV_meta ?= "b7125842b7ce188e7846a49fcb15a71c54806d6c" > > > > # remap qemuarm to qemuarma15 for the 5.8 kernel # > > KMACHINE_qemuarm ?= "qemuarma15" > > @@ -32,7 +32,7 @@ SRC_URI = "git://git.yoctoproject.org/linux- > > yocto.git;name=machine;branch=${KBRA > > git://git.yoctoproject.org/yocto-kernel- > > cache;type=kmeta;name=meta;branch=yocto-5.10;destsuffix=${KMETA}" > > > > LIC_FILES_CHKSUM = > > "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > -LINUX_VERSION ?= "5.10.29" > > +LINUX_VERSION ?= "5.10.30" > > > > DEPENDS += "${@bb.utils.contains('ARCH', 'x86', 'elfutils-native', '', d)}" > > DEPENDS += "openssl-native util-linux-native" > > -- > > 2.19.1 > -- - Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end - "Use the force Harry" - Gandalf, Star Trek II
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#150692): https://lists.openembedded.org/g/openembedded-core/message/150692 Mute This Topic: https://lists.openembedded.org/mt/82198348/21656 Group Owner: openembedded-core+ow...@lists.openembedded.org Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
