On Mon, 2020-02-24 at 15:40 +0200, Adrian Bunk wrote:
> On Mon, Feb 24, 2020 at 12:59:55PM +0000, André Draszik wrote:
> > The number of threads used, and the amount of memory allowed
> > to be used, should not affect sstate signatures, as they
> > don't affect the result.
>
> Unfortunately they can affect the result.
I looked into this a bit and its complicated. The threads are used to
compress chunks and their compression should be deterministic whether
done serially or in parallel.
I did some tests and:
xz <file>
gave equivalent output to:
xz <file> --threads=1
and
xz <file> --threads=2
xz <file> --threads=5
xz <file> --threads=50
all give different identical output.
So if we force --threads >=2 we should have determinism?
> > Otherwise, it becomes impossible to re-use sstate from
> > automated builders on developer's machines (as the former
> > might execute bitbake with certain constraints different
> > compared to developer's machines).
> > ...
> > -XZ_DEFAULTS ?= "--memlimit=50% --threads=${@oe.utils.cpu_count()}"
> > ...
>
> Threaded compression can result in slightly worse compression
> than single-threaded compression.
>
> With memlimit the problem is actually the opposite way,
> and worse than what you were trying to fix:
>
> When a developer hits memlimit during compression, the documented
> behavour of xz is to scale down the compression level.
>
> I assume 50% wrongly gives the same sstate signature no matter how
> much RAM is installed on the local machine?
I did some tests locally and I could see different output checksums
depending on how much memory I gave xz.
Perhaps we should specify a specific high amount like 1GB?
Does anyone know more about the internals and how to have this behave
"nicely" for our needs?
FWIW we haven't seen variation on the autobuilder due to this as far as
I know.
Cheers,
Richard
--
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
