On Wed, Jul 4, 2018 at 10:07 PM Martin Jansa <martin.ja...@gmail.com> wrote:
>
> This reverts commit 2e7f3b2b9318d1e5395ad58131eafb873f614326.
>
> It was breaking quite common use case that the dtb files are in
> some subdirectory and then kernel build fails to build them.
>
> As reported by khem:
> http://lists.openembedded.org/pipermail/openembedded-core/2018-July/152578.html
> me:
> http://lists.openembedded.org/pipermail/openembedded-core/2018-July/152579.html
> on raspberrypi3 build:
>
> make[3]: *** No rule to make target 'arch/arm/boot/dts/dwc2.dtbo'. Stop.
> arch/arm/Makefile:345: recipe for target 'dwc2.dtbo' failed
> make[2]: *** [dwc2.dtbo] Error 2
> Makefile:146: recipe for target 'sub-make' failed
>
> and trevor on the IRC:
> 20:35:49 < tlwoerner> the recent 2e7f3b2b9318d1e5395ad58131eafb873f614326
> commit in oe-core seems to cause dragonboard-410c's kernel to fail to build
> 20:36:26 < tlwoerner> for the dragonboard-410c, KERNEL_DEVICETREE is set to
> "qcom/apq8016-sbc.dtb" but the build failure is:
> 20:36:37 < tlwoerner> *** No rule to make target
> 'arch/arm64/boot/dts/dts/qcom/apq8016-sbc.dtb'. Stop.
> 20:36:44 < tlwoerner> i.e. the "qcom/" is getting removed
> 20:37:08 < tlwoerner> oops!!
> 20:37:33 < tlwoerner> wrong copy&paste, the actual error is:
> 20:37:36 < tlwoerner> *** No rule to make target
> 'arch/arm64/boot/dts/apq8016-sbc.dtb'. Stop.
> 20:37:53 < tlwoerner> i.e., the "qcom/" is being stripped out
>
> Signed-off-by: Martin Jansa <martin.ja...@gmail.com>
Thanks! As reported by Trevor, it's needed for meta-qcom..
Reviewed-by: Nicolas Dechesne <nicolas.deche...@linaro.org>
> ---
> meta/classes/kernel-devicetree.bbclass | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/meta/classes/kernel-devicetree.bbclass
> b/meta/classes/kernel-devicetree.bbclass
> index 7faa869493..9c5e125981 100644
> --- a/meta/classes/kernel-devicetree.bbclass
> +++ b/meta/classes/kernel-devicetree.bbclass
> @@ -13,8 +13,8 @@ normalize_dtb () {
> dtb="$1"
> if echo $dtb | grep -q '/dts/'; then
> bbwarn "$dtb contains the full path to the the dts file, but
> only the dtb name should be used."
> + dtb=`basename $dtb | sed 's,\.dts$,.dtb,g'`
> fi
> - dtb=`basename $dtb | sed 's,\.dts$,.dtb,g'`
> echo "$dtb"
> }
>
> --
> 2.17.1
>
> --
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core
--
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
