Op 26 aug. 2011, om 21:54 heeft Joel A Fernandes het volgende geschreven:
> Here's an initial version of the SDCard image build functionality. Its not a
> direct copy paste from Narcissus
Be careful when doing that, narcissus is GPLv2, OE-core is MIT
> , I had to replace paths and am copying files from IMAGE_ROOTFS instead of
> how Narcissus untars into a mount point.
>
> Not build tested.
>
> @Koen and all, here are some questions:
> 1. Where in openembedded-core do we store the "img.gz" template files so that
> they are available to image.bbclass?
We don't, we can generate is everytime now that we aren't running as www-data
> I'm thinking in the images/ directory where the beagleboard-gnome-image bb
> recipe is itself stored? What's a clean way?/
> 2. I've hardcoded loop device names just like Narcissus, what's a cleaner way?
> 3. Same as 2. but for temporary mount point names?
> 4. For copying ubifs, how do we ensure IMAGE_CMD_ubifs runs first before
> IMAGE_CMD_sdimg does?
>
> Thanks, if you get a chance to work on it, that'll be cool. I will continue
> to work on it after my class.
>
> Signed-off-by: Joel A Fernandes <joelag...@ti.com>
> Cc: Koen Kooi <k-k...@ti.com>
> Cc: Jason Kridner <j...@ti.com>
> ---
> meta/classes/image_types.bbclass | 99 ++++++++++++++++++++++++++++++++++++++
> 1 files changed, 99 insertions(+), 0 deletions(-)
>
> diff --git a/meta/classes/image_types.bbclass
> b/meta/classes/image_types.bbclass
> index cd901c1..39e7984 100644
> --- a/meta/classes/image_types.bbclass
> +++ b/meta/classes/image_types.bbclass
> @@ -88,6 +88,105 @@ IMAGE_CMD_ubi () {
> }
> IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o
> ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
>
> +IMAGE_CMD_sdimg () {
> + MD5SUM_SD="$(md5sum ${IMAGE_ROOTFS}/boot/uImage | awk '{print $1}')"
> + for sdsize in $(ls ${WORKDIR}/conf/sd/sd-master* | sed -e
> s:${WORKDIR}/conf/sd/sd-master-::g -e 's:.img.gz::g' | xargs echo) ; do
> + echo "SD size: $sdsize"
> +
> + if true ; then
> + echo "No cached SD image found, generating new one"
> + zcat ${WORKDIR}/conf/sd/sd-master-$sdsize.img.gz >
> ${WORKDIR}/sd.img
> + /sbin/fdisk -l -u ${WORKDIR}/sd.img
> +
> + # Output looks like:
> + # Disk sd-master-1GiB.img: 0 MB, 0 bytes
> + # 255 heads, 63 sectors/track, 0 cylinders, total 0 sectors
> + # Units = sectors of 1 * 512 = 512 bytes
> + # Sector size (logical/physical): 512 bytes / 512 bytes
> + # I/O size (minimum/optimal): 512 bytes / 512 bytes
> + # Disk identifier: 0x00000000
> + #
> + # Device Boot Start End Blocks
> Id System
> + # sd-master-1GiB.img1 * 63 144584
> 72261 c W95 FAT32 (LBA)
> + # sd-master-1GiB.img2 144585 1959929
> 907672+ 83 Linux
> +
> +
> + BYTES_PER_SECTOR="$(/sbin/fdisk -l -u sd.img | grep Units |
> awk '{print $9}')"
> + VFAT_SECTOR_OFFSET="$(/sbin/fdisk -l -u sd.img | grep img1 |
> awk '{print $3}')"
> + EXT3_SECTOR_OFFSET="$(/sbin/fdisk -l -u sd.img | grep img2 |
> awk '{print $2}')"
> +
> + LOOP_DEV="/dev/loop1"
> + LOOP_DEV_FS="/dev/loop2"
> + umount ${LOOP_DEV} || true
> + umount ${LOOP_DEV_FS} || true
> + /sbin/losetup -d ${LOOP_DEV} || true
> + /sbin/losetup -d ${LOOP_DEV_FS} || true
> +
> + echo ""
> +
> + # VFAT
> + echo "/sbin/losetup -v -o $(expr ${BYTES_PER_SECTOR} "*"
> ${VFAT_SECTOR_OFFSET}) ${LOOP_DEV} ${WORKDIR}/sd.img"
> + /sbin/losetup -v -o $(expr ${BYTES_PER_SECTOR} "*"
> ${VFAT_SECTOR_OFFSET}) ${LOOP_DEV} ${WORKDIR}/sd.img
> +
> + # EXT3
> + echo "/sbin/losetup -v -o $(expr ${BYTES_PER_SECTOR} "*"
> ${EXT3_SECTOR_OFFSET}) ${LOOP_DEV_FS} ${WORKDIR}/sd.img"
> + /sbin/losetup -v -o $(expr ${BYTES_PER_SECTOR} "*"
> ${EXT3_SECTOR_OFFSET}) ${LOOP_DEV_FS} ${WORKDIR}/sd.img
> + echo "/sbin/mkfs.ext3 -L Narcissus-rootfs ${LOOP_DEV_FS}"
> + /sbin/mkfs.ext3 -L Narcissus-rootfs ${LOOP_DEV_FS}
> +
> + echo ""
> +
> + echo "mount ${LOOP_DEV}"
> + mount ${LOOP_DEV}
> +
> + echo "mount ${LOOP_DEV_FS}"
> + mount ${LOOP_DEV_FS}
> +
> + # report mount status to log
> + mount | grep loop
> +
> + if [ -e ${IMAGE_ROOTFS}/boot/MLO ] ; then
> + cp -v ${IMAGE_ROOTFS}/boot/MLO
> /mnt/narcissus/sd_image1/MLO
> + fi
> +
> + echo "Remounting ${LOOP_DEV}"
> + umount ${LOOP_DEV}
> + mount ${LOOP_DEV}
> +
> + echo "Copying file system:"
> + cp -r ${IMAGE_ROOTFS}/* /mnt/narcissus/sd_images2/ || true
> +
> + echo "Copying bootloaders into the boot partition"
> + cp -v /mnt/narcissus/sd_image2/boot/u-boot-*.bin
> /mnt/narcissus/sd_image1/u-boot.bin || true
> + cp -v /mnt/narcissus/sd_image2/boot/uImage-2.6*
> /mnt/narcissus/sd_image1/uImage || true
> + cp -v /mnt/narcissus/sd_image2/boot/user.txt
> /mnt/narcissus/sd_image1/ || true
> + cp -v /mnt/narcissus/sd_image2/boot/uEnv.txt
> /mnt/narcissus/sd_image1/ || true
> +
> + if [ ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubi ] ; then
> + echo "Copying UBIFS image to file system:"
> + cp ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubi
> /mnt/narcissus/sd_image2/boot/fs.ubi
> + fi
> +
> + touch /mnt/narcissus/sd_image2/narcissus-was-here
> + echo "Remounting ${LOOP_DEV_FS}"
> + umount ${LOOP_DEV_FS}
> + mount ${LOOP_DEV_FS}
> +
> + echo "files in ext3 partition:" $(du -hs
> /mnt/narcissus/sd_image2/* | sed s:/mnt/narcissus/sd_image2/::g)
> +
> + echo "umount ${LOOP_DEV}"
> + umount ${LOOP_DEV}
> + echo "umount ${LOOP_DEV_FS}"
> + umount ${LOOP_DEV_FS}
> +
> + /sbin/losetup -d ${LOOP_DEV}
> + /sbin/losetup -d ${LOOP_DEV_FS}
> +
> + gzip -c sd.img >
> ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-${MACHINE}-sd-$sdsize.img.gz
> + fi
> + done
> +}
> +
> EXTRA_IMAGECMD = ""
> EXTRA_IMAGECMD_jffs2 ?= "--pad --little-endian --eraseblock=0x40000"
> # Change these if you want default genext2fs behavior (i.e. create minimal
> inode number)
> --
> 1.7.0.4
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
