My current configuration was set up with the help of the Angstrom
instructions [1], and I applied patches via the "oebb.sh update"
command.
Running Bitbake would show the following sanity error on any image / machine:
samuel@S-Linux:/var/oe-core/setup-scripts$ bitbake console-image
ERROR: Poky's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
Following is the list of potential problems / advisories:
You have a 32-bit libc, but no 32-bit headers. You must install
the 32-bit libc headers.
ERROR: Execution of event handler 'check_sanity_eventhandler' failed
For me it looks like an error with my configuration, but on the other
side, before the update building images with bitbake worked.
Well I don't know exactly if this is caused by the glibc deletion, but
IMHO it seems very likely.
Anyone else faced the same problem?
Help would be very appreciated.
Regards
--Samuel
[1]
http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-angstrom/tree/README
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
