EqualLogic arrays always do a redirect, because you connect to the group
address and you are redirected by the connection balancer to a specific
interface IP address.
The initiator is wrong to call code 0101 a “login error”. The RFC is perfectly
clear that redirect is NOT an error condition. But it looks like it’s just a
confusing message, nothing more.
If you’re seeing actual failures to connect, you should look for other messages
that explain that; the redirect isn’t the explanation. Real connection
failures should also come with event messages on the array that report some
sort of error, for example an access control reject.
paul
> On Dec 9, 2014, at 7:28 AM, [email protected] wrote:
>
> Hi guys,
>
> I am currently getting a simular error
> Login to iSCSI target
> iqn.2001-05.com.equallogic:0-8a0906-ee861180b-5e40001a1484fc4b-xxxx01 on
> vmhba39 @ vmk4 failed. Target returned login error of: 0101.
>
> These drives used to be fine on this host.
>
> When looking in static discovery I can see the target. We are getting this
> for a few volumes too. It is happening to random volumes over random hosts.
>
> Other hosts are connecting to this LUN with out any issues.
>
> Any help here would be great.
>
>
> On Wednesday, July 30, 2014 7:41:03 AM UTC+1, KUMAR NITISH wrote:
> Hi all,
>
> I am using Dell EqualLogic array as target. When I make session with this
> target, I am getting the logs as given below :
>
> login response status 0101
> Login authentication failed with target
> iqn.2001-05.com.equallogic:0-8a0906-964f1f903-d850018d2a253d5f-nitishk521
> ..
> ..
> login response status 0000
> Login Success:
> iqn.2001-05.com.equallogic:0-8a0906-964f1f903-d850018d2a253d5f-nitishk521
> if=default addr=10.115.178.29:3260 <http://10.115.178.29:3260/> (TPGT:1
> ISID:0x1)
>
> Why log "Login authentication failed with target" shows on iSCSI
> login-redirect..?
> I think It's a bug and It should show the proper message.
>
> Regards,
> Nitish
>
> --
> You received this message because you are subscribed to the Google Groups
> "open-iscsi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected]
> <mailto:[email protected]>.
> To post to this group, send email to [email protected]
> <mailto:[email protected]>.
> Visit this group at http://groups.google.com/group/open-iscsi
> <http://groups.google.com/group/open-iscsi>.
> For more options, visit https://groups.google.com/d/optout
> <https://groups.google.com/d/optout>.
--
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.
