What are you using for an iSCSI target? IETD doesn't support tape drives.
Try STGT http://stgt.sourceforge.net/ They claim to support VTL. I haven't tried it myself. I believe there are one or two other Linux iSCSI targets that support tape drives as well. Regards, Don On Thu, Sep 11, 2014 at 2:38 PM, Kelley, Jared <[email protected]> wrote: > I’m trying to setup a VTL on some AWS EC2 instances and have done so > with success however the scsi devices (virtual tape drives) > show up as connected to the client but there is nothing listed under > /dev/st* nor is there any /dev/by-path directory on the client. > > Has anyone experienced this and what might be the issue? > > Thanks in advance > > Jk > > -- > You received this message because you are subscribed to the Google Groups > "open-iscsi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/open-iscsi. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.
