On Jun 4, 2014, at 7:11 AM, vichharaks ros <[email protected]> wrote:
> Hi, > > Target server : > > 2.6.32-431.17.1.el6.centos.plus.x86_64 > # rpm -qa | grep scsi > iscsi-initiator-utils-6.2.0.873-10.el6.x86_64 > scsi-target-utils-1.0.24-12.el6_5.x86_64 > > # cat /etc/tgt/targets.conf > default-driver iscsi > <target iqn.2008-09.com.example:server.target1> > backing-store /dev/vgiscsi/lviscsi1 > initiator-address 192.168.10.0/24 > </target> > > # tgtadm --lld iscsi --mode target --op show > Target 1: iqn.2008-09.com.example:server.target1 > System information: > Driver: iscsi > State: ready > I_T nexus information: > I_T nexus: 1 > Initiator: iqn.1994-05.com.redhat:z400 > Connection: 0 > IP Address: 192.168.10.70 > LUN information: > LUN: 0 > Type: controller > SCSI ID: IET 00010000 > SCSI SN: beaf10 > Size: 0 MB, Block size: 1 > Online: Yes > Removable media: No > Prevent removal: No > Readonly: No > Backing store type: null > Backing store path: None > Backing store flags: > Account information: > ACL information: > 192.168.10.0/24 > > > Initiator host: > > 2.6.32-431.17.1.el6.x86_64 #1 > # rpm -qa | grep scsi > iscsi-initiator-utils-6.2.0.873-10.el6.x86_64 > > # iscsiadm -m node > 192.168.10.50:3260,1 iqn.2008-09.com.example:server.target1 > # iscsiadm -m session > tcp: [1] 192.168.10.50:3260,1 iqn.2008-09.com.example:server.target1 > > > # iscsiadm -m session -P 3 > iSCSI Transport Class version 2.0-870 > version 6.2.0-873.10.el6 > Target: iqn.2008-09.com.example:server.target1 > Current Portal: 192.168.10.50:3260,1 > Persistent Portal: 192.168.10.50:3260,1 > ********** > Interface: > ********** > Iface Name: iface0 > Iface Transport: tcp > Iface Initiatorname: iqn.1994-05.com.redhat:z400 > Iface IPaddress: 192.168.10.70 > Iface HWaddress: F4:CE:46:2D:A6:E9 > Iface Netdev: <empty> > SID: 1 > iSCSI Connection State: LOGGED IN > iSCSI Session State: LOGGED_IN > Internal iscsid Session State: NO CHANGE > ********* > Timeouts: > ********* > Recovery Timeout: 120 > Target Reset Timeout: 30 > LUN Reset Timeout: 30 > Abort Timeout: 15 > ***** > CHAP: > ***** > username: <empty> > password: ******** > username_in: <empty> > password_in: ******** > ************************ > Negotiated iSCSI params: > ************************ > HeaderDigest: None > DataDigest: None > MaxRecvDataSegmentLength: 262144 > MaxXmitDataSegmentLength: 8192 > FirstBurstLength: 65536 > MaxBurstLength: 262144 > ImmediateData: Yes > InitialR2T: Yes > MaxOutstandingR2T: 1 > ************************ > Attached SCSI devices: > ************************ > Host Number: 6 State: running > scsi6 Channel 00 Id 0 Lun: 0 > > # dmesg | grep scsi > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > scsi3 : ahci > scsi4 : ahci > scsi5 : ahci > scsi 1:0:0:0: Direct-Access ATA ST3500641AS 3.AH PQ: 0 ANSI: 5 > sd 1:0:0:0: Attached scsi generic sg0 type 0 > iscsi: registered transport (tcp) > iscsi: registered transport (iser) > iscsi: registered transport (cxgb3i) > iscsi: registered transport (cxgb4i) > iscsi: registered transport (bnx2i) > iscsi: registered transport (be2iscsi) > In beiscsi_module_init, tt=ffffffffa060ee80 > scsi6 : iSCSI Initiator over TCP/IP > scsi 6:0:0:0: RAID IET Controller 0001 PQ: 0 ANSI: 5 > scsi 6:0:0:0: Attached scsi generic sg1 type 12 > > > # fdisk -l > > Disk /dev/sda: 500.1 GB, 500107862016 bytes > 255 heads, 63 sectors/track, 60801 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disk identifier: 0x4c05c860 > > Device Boot Start End Blocks Id System > /dev/sda1 * 1 64 512000 83 Linux > Partition 1 does not end on cylinder boundary. > /dev/sda2 64 60802 487873536 8e Linux LVM > > > So my problem is that , no new iscsi disk is attached to the initiator host, > any idea? You need to email the stgt list. I think the problem is just that you did not define any disks: > Type: controller It looks like you defined LUN0 as a controller. -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/open-iscsi. For more options, visit https://groups.google.com/d/optout.
