On Nov 27, 11:51 pm, Mike Christie <[email protected]> wrote: > On 11/27/2011 06:06 PM, Matt Lundstrom wrote: > > > Hi Mike, > > > Well, the log above was just a sample. The underlying 1011 error sometimes > > appears without a ping error, for example: > > Could you try the kernel I sent in the other mail: > > http://people.redhat.com/mchristi/kernel-2.6.18-274.el5.iscsidebug1.i... > > http://people.redhat.com/mchristi/kernel-PAE-2.6.18-274.el5.iscsidebu... > > http://people.redhat.com/mchristi/kernel-2.6.18-274.el5.iscsidebug1.x... > > It is just the rhel 5.7 kernel but with the iscsi eh debugging on and > with some printks in some of the other iscsi network eh paths. I had to > make a special kernel because the iscsi modules shipped in rhel 5 do not > allow you to turn on debugging for just the eh paths. > > If you need to run the rhel 5.6 kernel then you should be able to take > the iscsi modules from the kernel above and run them in 5.6.
Well, we got things juggled around a lot sooner than expected, and got the kernel installed. But our VMs would not start under it. [root@hv4 ~]# tail -f /var/log/messages Dec 6 14:25:15 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth3)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:15 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth4)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:15 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth5)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:15 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth6)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:15 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth7)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:45 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth3)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:45 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth4)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:45 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth5)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:45 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth6)]Illegal configuration detected for Max BW - using 100 instead Dec 6 14:25:45 hv4 kernel: [bnx2x_extract_max_cfg:1074(eth7)]Illegal configuration detected for Max BW - using 100 instead Looks like this kernel doesn't like the Nics on the blade servers. Regards, Matt -- You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/open-iscsi?hl=en.
