Hi,

On 7/5/21 3:12 PM, [email protected] wrote:
> Hi together, 
>
> I have a setup where I want to use a M2M simcard from Telefonica issued in 
> Germany. I have verified with a technician from Telefonica that the MCC/MNC's 
> (262 | 03, 07,77) and the APN (iotde.telefonica.com) are correct and have 
> configured oFono to use those and the network registartion props show that 
> 262 | 03 seems to be actually used. However, the IMSI shows that the SIM card 
> has the MCC and MNC registered for Movistar (Telefonica) Spain (214 | 07). 
>
> The problem is that the ConnectionContext does not seem to be able to get or 
> register the correct APN and the device is not able to get connection. I have 
> appended some printouts of the different properties.
>
> Does anyone has an idea if I need to configure something additionaly or how 
> to fix this problem?
>
> HardwarePosition:internal
>    Powered:1
>    Online:1
>    Manufacturer:QUALCOMM INCORPORATED
>    Model:QUECTEL Mobile Broadband Module
>    Revision:EG25GGBR07A07M2G
>   [SimProps]
>       Present:1
>       CardIdentifier:8934076100150326600
>       SubscriberIdentity:214074307601315
>       LockedPins:dbus.Array([], signature=dbus.Signature('s'), 
> variant_level=1)
>       PinRequired:none
>   [NetworkRegistrationProps]
>       Status:roaming
>       MobileCountryCode:262
>       MobileNetworkCode:03
>       Name:26203
>     Strength:40
>       Technology:lte
>     RSSI:None
>   [ConnectionManagerProperties]
>       Attached:1
>       RoamingAllowed:1
>   [ConnectionContexts]
>     [/quectelqmi_0/context1]
>          Name:Internet
>          Active:0
>          Type:internet
>          Protocol:ip
>          AccessPointName:
>          Username:
>          Password:
>          AuthenticationMethod:chap

Your debug output makes me think you are using a kerlink board. Am I right?

If this is the case, your APN is badly configured. Please send
/etc/network/ofono/provisioning file, I'll have a look. Meanwhile, if
you have modified this file, you can try "/etc/init.d/ofono reset" to be
sure to use the latest version of this file.

> _______________________________________________
> ofono mailing list -- [email protected]
> To unsubscribe send an email to [email protected]


Best Regards,

Christophe Ronco
_______________________________________________
ofono mailing list -- [email protected]
To unsubscribe send an email to [email protected]

Reply via email to