Hi Rodrigues I tried three times to run fsck.ocfs2 -fy and it founded and correct a lot of error. So I tried to remounted the partition but after about 10 minutes of usage the file system go to read only again:
Feb 11 10:18:22 posta2 kernel: [ 6077.249760] o2dlm: Nodes in domain CD18FE0B8D2440719BE71391F1E554DB: 1 Feb 11 10:18:22 posta2 ocfs2_hb_ctl[14822]: ocfs2_hb_ctl /sbin/ocfs2_hb_ctl -P -d /dev/mapper/360080e500024f95000002adc5266d67d Feb 11 10:18:22 posta2 kernel: [ 6077.257345] ocfs2: Mounting device (253,2) on (node 1, slot 0) with ordered data mode. Feb 11 10:18:28 posta2 kernel: [ 6083.228714] o2net: connection to node posta-n (num 0) at 172.16.1.1:7777 shutdown, state 7 Feb 11 10:18:30 posta2 kernel: [ 6085.222665] o2net: connected to node posta-n (num 0) at 172.16.1.1:7777 Feb 11 10:18:32 posta2 kernel: [ 6087.597043] o2dlm: Node 0 joins domain CD18FE0B8D2440719BE71391F1E554DB Feb 11 10:18:32 posta2 kernel: [ 6087.597047] o2dlm: Nodes in domain CD18FE0B8D2440719BE71391F1E554DB: 0 1 [...] Feb 11 10:24:18 posta2 kernel: [ 6432.043311] OCFS2: ERROR (device dm-2): ocfs2_validate_inode_block: Invalid dinode #504180555: OC FS2_VALID_FL not set Feb 11 10:24:18 posta2 kernel: [ 6432.043313] Feb 11 10:24:18 posta2 kernel: [ 6432.043315] File system is now read-only due to the potential of on-disk corruption. Please run f sck.ocfs2 once the file system is unmounted. Feb 11 10:24:18 posta2 kernel: [ 6432.043317] (imap,17616,1):ocfs2_read_locked_inode:493 ERROR: status = -22 Feb 11 10:24:18 posta2 kernel: [ 6432.043500] OCFS2: ERROR (device dm-2): ocfs2_validate_inode_block: Invalid dinode #504180555: OC FS2_VALID_FL not set Feb 11 10:24:18 posta2 kernel: [ 6432.043502] Feb 11 10:24:18 posta2 kernel: [ 6432.043504] (imap,17616,0):ocfs2_read_locked_inode:493 ERROR: status = -22 Feb 11 10:24:18 posta2 kernel: [ 6432.051688] OCFS2: ERROR (device dm-2): ocfs2_validate_inode_block: Invalid dinode #504180555: OC FS2_VALID_FL not set I tried to run fsck.ocfs2 again this mornig and this is the output: posta2:~ # fsck.ocfs2 -fy /dev/mapper/360080e500024f95000002adc5266d67d fsck.ocfs2 1.6.4 Checking OCFS2 filesystem in /dev/mapper/360080e500024f95000002adc5266d67d: Label: home UUID: CD18FE0B8D2440719BE71391F1E554DB Number of blocks: 524288000 Block size: 4096 Number of clusters: 65536000 Cluster size: 32768 Number of slots: 16 /dev/mapper/360080e500024f95000002adc5266d67d was run with -f, check forced. Pass 0a: Checking cluster allocation chains Pass 0b: Checking inode allocation chains Pass 0c: Checking extent block allocation chains Pass 1: Checking inodes and blocks. Pass 2: Checking directory entries. pass2: I/O error on channel while reading dir block 349804432 pass2: I/O error on channel while reading dir block 349824352 pass2: I/O error on channel while reading dir block 349824353 pass2: I/O error on channel while reading dir block 349824354 pass2: I/O error on channel while reading dir block 349824355 pass2: I/O error on channel while reading dir block 349824356 pass2: I/O error on channel while reading dir block 349824357 pass2: I/O error on channel while reading dir block 349824648 pass2: I/O error on channel while reading dir block 349824649 pass2: I/O error on channel while reading dir block 349824650 pass2: I/O error on channel while reading dir block 349824651 pass2: I/O error on channel while reading dir block 349824652 pass2: I/O error on channel while reading dir block 349824653 Pass 3: Checking directory connectivity. [DIR_DOTDOT] Directory inode 266888198 is referenced by a dirent in directory 266888194 but its '..' entry points to inode 0. Fix the '..' entry to reference 266888194? y fix_dot_dot: I/O error on channel while iterating through dir inode 266888194's directory entries. Pass 4a: checking for orphaned inodes Pass 4b: Checking inodes link counts. All passes succeeded. thank you for you help. bye Il 12/02/2015 19:05, Goldwyn Rodrigues ha scritto: > Hello Antonello, > > On 02/12/2015 08:36 AM, Antonello Cioffi wrote: >> Hello >> >> yesterday my ocfs2 fail after about 5 months of usage. >> >> First I had high load on one of the two node. I rebooted it and at >> reboot these messeges appered: >> >> Feb 10 20:33:22 posta-n kernel: [ 90.342829] o2net: accepted >> connection from node posta2 (num 1) at 172.16.1.2:7777 >> Feb 10 19:44:01 posta-n kernel: [ 727.825755] OCFS2: ERROR (device >> dm-0): ocfs2_validate_inode_block: Invalid dinode #221213540: >> OCFS2_VALID_FL not set >> Feb 10 19:44:01 posta-n kernel: [ 727.825758] >> Feb 10 19:44:01 posta-n kernel: [ 727.825761] File system is now >> read-only due to the potential of on-disk corruption. Please run >> fsck.ocfs2 once the file system is unmounted. >> Feb 10 19:44:01 posta-n kernel: [ 727.825767] >> (pop3,6032,4):ocfs2_read_locked_inode:493 ERROR: status = -22 >> Feb 10 19:44:01 posta-n kernel: [ 727.826228] OCFS2: ERROR (device >> dm-0): ocfs2_validate_inode_block: Invalid dinode #221213540: >> OCFS2_VALID_FL not set >> Feb 10 19:44:01 posta-n kernel: [ 727.826230] >> Feb 10 19:44:01 posta-n kernel: [ 727.826235] >> (pop3,6032,5):ocfs2_read_locked_inode:493 ERROR: status = -22 >> Feb 10 19:44:01 posta-n kernel: [ 727.826726] OCFS2: ERROR (device >> dm-0): ocfs2_validate_inode_block: Invalid dinode #221213540: >> OCFS2_VALID_FL not set >> Feb 10 19:44:01 posta-n kernel: [ 727.826728] >> >> now I migrate all files to a new ocfs2 partition and I'm using this new >> one to come back online. >> >> I'm using two SLES 11sp3 with this packages >> >> ocfs2-tools-o2cb-1.8.2-0.15.5 >> ocfs2-kmp-default-1.6_3.0.76_0.9-0.16.24 >> ocfs2-kmp-trace-1.6_3.0.76_0.9-0.16.24 >> ocfs2-tools-1.8.2-0.15.5 >> ocfs2console-1.8.2-0.15.5 >> ocfs2-tools-devel-1.8.2-0.15.5 >> >> How can I figure what appened and is there anything I can do to avoid >> the occuring again? >> >> According to software storage all disks are ok. >> > > Did you try executing fsck.ocfs2 as the message proposes? What message > did fsck.ocfs2 say? You may have to take it offline and run fsck.ocfs2 > -f <device> > > -- Dott. Antonello Cioffi Ufficio Servizi Informatici Università degli Studi di Napoli Parthenope Tel. 081/5475292 - Fax. 081/5475180 _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users
