Sorry for delay response.

There is seven node in the OCFS2 Cluster.

The system timeout config is default values as below:
# O2CB_HEARTBEAT_THRESHOLD: Iterations before a node is considered dead.
O2CB_HEARTBEAT_THRESHOLD=31

# O2CB_IDLE_TIMEOUT_MS: Time in ms before a network connection is considered 
dead.
O2CB_IDLE_TIMEOUT_MS=30000

# O2CB_KEEPALIVE_DELAY_MS: Max. time in ms before a keepalive packet is sent.
O2CB_KEEPALIVE_DELAY_MS=2000

# O2CB_RECONNECT_DELAY_MS: Min. time in ms between connection attempts.
O2CB_RECONNECT_DELAY_MS=2000

The fence_method is set with “reset”, default value.

The test steps is:

1.        The node 2013-SRV06, 2013-SRV09 and 2013-SRV10 is shutdown for the 
VLAN changed on the switch.

2.        The other four nodes VLAN changed to the same VLAN as the step one, 
but the host does not shutdown.

3.        As the three nodes, 2013-SRV06, 2013-SRV09 and 2013-SRV10, powered on 
and restarted and they can’t access OCFS2 cluster with mount error.

Note: Changing VLAN is that changing the management network VLAN, the network 
is used in OCFS2 kernel to communicate information. The network accessing 
storage does not changed.

The attachment file is the log digested from the syslog on the nodes.

Thanks a lot.


发件人: ocfs2-users-boun...@oss.oracle.com 
[mailto:ocfs2-users-boun...@oss.oracle.com] 代表 Srinivas Eeda
发送时间: 2013年4月29日 2:51
收件人: ocfs2-users@oss.oracle.com
主题: Re: [Ocfs2-users] Is it one issue. Do you have some good ideas, thanks a 
lot.

On 04/28/2013 03:54 AM, Guozhonghua wrote:
Hi, everyone

I have some questions with the OCFS2 when using it as vm-store.

With Ubuntu 1204, kernel version is 3.2.40, and ocfs2-tools version is 1.6.4.

As the network configure change, there are some issues as the log below.

Why is there the information of “Node 255 (he) is the Recovery Master for the 
dead node 255” in the syslog?
This appears to be a bug. Not sure how big the cluster is, but since this node 
lost connection to at least few nodes it should have got evicted itself (unless 
its a very big cluster)

Why the host ZHJD-VM6 is blocked until it reboot one day time later, and what 
is it wait for still?
last message seems to be at Apr 27 17:44:52, so the node is effectively dead at 
this time even though it restarted much later. What are the timeouts set to? 
what is the fence_method set to? Please forward me the messages files from 
other nodes, I would like to see how other nodes behaved.


Thanks a lot.



-------------------------------------------------------------------------------------------------------------------------------------
本邮件及其附件含有杭州华三通信技术有限公司的保密信息,仅限于发送给上面地址中列出
的个人或群组。禁止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制、
或散发)本邮件中的信息。如果您错收了本邮件,请您立即电话或邮件通知发件人并删除本
邮件!
This e-mail and its attachments contain confidential information from H3C, 
which is
intended only for the person or entity whose address is listed above. Any use 
of the
information contained herein in any way (including, but not limited to, total 
or partial
disclosure, reproduction, or dissemination) by persons other than the intended
recipient(s) is prohibited. If you receive this e-mail in error, please notify 
the sender
by phone or email immediately and delete it!

Attachment: log_digest.tar.gz
Description: log_digest.tar.gz

_______________________________________________
Ocfs2-users mailing list
Ocfs2-users@oss.oracle.com
https://oss.oracle.com/mailman/listinfo/ocfs2-users

Reply via email to