"Xianghaizhou (A)" <[email protected]> writes:
> This idea sound great, Did you propose any draft?
No... I suppose I should, just to have a fixed point to base the
discussion on.
BTW, looking at draft-xiang-nvo3-geneve-packet-spray-00, at the end of
section 5.3 is:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|Ver| Opt Len |O|C| Rsvd. | Protocol Type |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Virtual Network Identifier (VNI) | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Option Class = GFP | Type=Capacity |R|R|R| Length=8|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| MAX GROUP ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Capability notification message format
In the third word, the "Length" field has the value 1, which indicates
that the option contains one word of option data. Compare with the
figure at the end of section 5.1.
Also, the definition of MAX GROUP ID is
MAX GROUP ID is a four byte field. MAX Group ID indicate the max
Group ID assigned to the destination. The Group ID allocated by the
source must be limited to 0 ~ MAX Group ID.
It might be more convenient to set "The Group ID allocated by the source
must be limited to 0 ~ (MAX Group ID - 1)."
Dale
_______________________________________________
nvo3 mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/nvo3
