Hi!
The configuration is quite minimalistic:
ntopng:
-G=/var/run/ntopng.pid
-i="tcp://192.168.224.10:5556"
-m="10.123.123.0/24,192.168.224.0/24"
--community
nprobe:
-G=/var/run/nprobe.pid
-i=none
-n=none
-3=6363
--zmq="tcp://*:5556"
For example I want to see the bandwith used by Netflix or IPTV or
something like that.
Matthias
Am 07.02.19 um 17:30 schrieb Simone Mainardi:
Hi Matt,
Please, show the nProbe and ntopng configurations used. Reported behavior can
be normal as softflowd flow reports are periodic (eg. every minute) so it's
normal if you see spiky traffic.
On 7 Feb 2019, at 09:28, Matthias Brumm <matth...@brumm.net> wrote:
Hi!
At the moment I am trying to get the above setup running. softflowd is an a
PFsense, nProbe on a Raspberry and ntopng on a Debian 9 VM. I do not get
sufficiant data (only peaks of 20 to 200 Mbit/s and no stream of traffic).
A ntopng on the PFsense is not working properly so I would like to try this way.
Am I missing some options to calibrate the information? I left pretty much all
of it alone.
Matthias
_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
--
Unser Familien-Blog: https://brumm.family
_______________________________________________
Ntop mailing list
Ntop@listgateway.unipi.it
http://listgateway.unipi.it/mailman/listinfo/ntop
