Hi Ali thanks for contacting us. The web interface should bind to 0.0.0.0 so you should be able to reach the GUI from all interfaces. Can you check with “netstat” from cmd.exe if this is the case? I believe that on the NIC you’re sending traffic to, you do not need to set an IP address.
Promiscuous is necessary as ntopng needs to capture packets not directed to the MAC address of the monitoring NIC Regards Luca > On 3 Jan 2018, at 09:08, Ali Kanarya <[email protected]> wrote: > > First of all I would like to thanks about the great software. > > Nowadays I am giving a try to ntopng to monitor our internet usage. > I am monitoring Draytek 2860 mirrored port. > I have 2 nics on my windows pc. One is directly connected to the mirrored > port, and the other one > is connected to another switch on LAN backbone. > Both nics are in the same IP subnet range. I need this because monitored port > is also monitored by draytek app on the same pc and this app requires this. > I can monitor the port without problem using ntopng. > > My question is that I cannot connect the ntopng web server through another pc > on LAN, because of nic IP issue. > On the monitoring pc, web server is accesible. I have to assign webserver to > the other nic in ntopng, i guess. > > Another question, i didnt do enabling Promiscuous Mode on pc nic that > monitors mirrored port. > Is it necessary to do this? > > Best Regards, > Ali > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
