After upgrading to 2.5.170108-2130 I have no flows in the flows view ..
at all.
I have tried to downgrade to 2.5.170106 as I had a copy of that lying
around on a host, that listens on a different network without the use of
nprobe and it has flows.
But when used together with nprobe even that version has no flows.
I then downgraded to 2.4 stable and I have flows again, as I previously
had with the 2.5 releases from November 2016.
This what I installed today:
ntopng 2.5.170108-2130
ntopng-data 2.5.170108
nprobe 7.5.170108-5578
pfring 6.5.0-1089
pfring-dkms 6.5.0
nprobe is started like this:
nprobe -i none -n none -3 2055 --zmq tcp://127.0.0.1:1234 -V 9
ntopng is started like this:
ntopng /etc/ntopng/ntopng.conf --local-networks xxxx -i
tcp://127.0.0.1:1234 -x 400000 -X 800000
nprobe gets SNMP from 6 routers with a total stream of about 1.4-1.7
Gbit/s data flow, so it's not the lack of flows, that's the problem. And
the configuration nor the startup parameters have been changed from
before the upgrade, where I had flows.
Kind regards,
Martin List-Petersen
--
Airwire Ltd. - Ag Nascadh Pobail an Iarthair
http://www.airwire.ie
Phone: 091-865 968
Registered Office: Moy, Kinvara, Co. Galway, 091-865 968 - Registered in
Ireland No. 508961
_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
