On Mon, 2011-04-11 at 17:32 -0500, Gary Gatten wrote: > So, is this just a grammatical error or is it not working correctly?
I think it may be both - I know I'm generating ifOutDiscards on the port - I have a netperf test running and the egress port is only 100 Mbit/s while the ingress is 1 GbE. The chart for "IfOutDiscards.rrd" is claiming that I'm stting something North of 450 Mbit/s of discards, which I know cannot be correct (is there list chapter and verse on screen dumps?). > Many/all of these counters are typically a running total/sum - not a > rate as pps would indicate. I'm guessing nTop (or rrd?) would have to > do the math and determine the rate? I believe one or the other is doing so for the Octet counters - the IfOutOctents.rrd are looking generally sane . rick > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Rick Jones > Sent: Monday, April 11, 2011 5:27 PM > To: [email protected] > Subject: [Ntop] whence are set titles and units for graphs? would like to > make discards and errors Pkt/s rather than Bit/s > > I'm looking at > http://127.0.0.1:3000/plugins/rrdPlugin?action=list&key=interfaces/sFlow-device.2/sFlow/47&title=Interface+Id+47 > > as generated by 4.0.3 in my environment, for one of the interfaces on my > switch which is emitting sFlow counters, and it is giving me a set of > chards - at the top it says "Info about Interface Id 47" and then I get > something like ten charts: > > Title Units > IfInOctets.rrd Bit/s > IfOutOctets.rrd Bit/s > IfOutDiscards.rrd Bit/s > IfOutUcast Packets Pkt/s > IfInMulticast Packets Pkt/s > IfInErrors.rrd Bit/s > IfInBroadcast Packets Pkt/s > IfOutBroadcast Packets Pkt/s > IfOutMulticast Packets Pkt/s > IfInUcast Packets Pkt/s > > it would seem that anything that ended-up with "Packets" in its title > had a correct units of Pkt/s but enything with ".rrd" in its title > thought the units were Bit/s even though some of them should be Pkt/s. > > I am guessing that the setting of graphId is involved, but I'm having a > devil of a time seeing where graphId is getting set for each. I can > mouse over to the magnifying glass to the right of each chart and I see > a graphId in that URL but it is always "99" regardless of which of the > ten I check. > > If someone can point me in the correct direction that would be great. > > rick jones > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > > > > > > <font size="1"> > <div style='border:none;border-bottom:double windowtext 2.25pt;padding:0in > 0in 1.0pt 0in'> > </div> > "This email is intended to be reviewed by only the intended recipient > and may contain information that is privileged and/or confidential. > If you are not the intended recipient, you are hereby notified that > any review, use, dissemination, disclosure or copying of this email > and its attachments, if any, is strictly prohibited. If you have > received this email in error, please immediately notify the sender by > return email and delete this email from your system." > </font> _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
