No problem :-) Alfredo
> On 15 Aug 2016, at 05:54, GH <[email protected]> wrote: > > That embarrassing, I didn't know that vmxnet3 was a 10gb interface > which explains why I was getting the license error. Thanks. > > root@nbox:/etc/cento# ethtool -i ens192 > driver: vmxnet3 > version: 1.4.5.0-k-NAPI > firmware-version: > expansion-rom-version: > bus-info: 0000:0b:00.0 > supports-statistics: yes > supports-test: no > supports-eeprom-access: no > supports-register-dump: yes > supports-priv-flags: no > > root@nbox:/etc/cento# ethtool ens192 > Settings for ens192: > Supported ports: [ TP ] > Supported link modes: 1000baseT/Full > 10000baseT/Full > Supported pause frame use: No > Supports auto-negotiation: No > Advertised link modes: Not reported > Advertised pause frame use: No > Advertised auto-negotiation: No > Speed: 10000Mb/s > Duplex: Full > Port: Twisted Pair > PHYAD: 0 > Transceiver: internal > Auto-negotiation: off > MDI-X: Unknown > Supports Wake-on: uag > Wake-on: d > Link detected: yes > > On Fri, Aug 12, 2016 at 3:43 AM, Alfredo Cardigliano > <[email protected]> wrote: >> Please provide "ethtool -i ens192" and "ethtool ens192" >> >> Regards >> Alfredo >> >>> On 12 Aug 2016, at 05:23, GH <[email protected]> wrote: >>> >>> Everytime I start cento from nbox I get this error: >>> >>> Permanent nProbe cento S license found [/etc/cento.license] >>> 11/Aug/2016 23:13:08Built on Ubuntu 16.04.1 LTS >>> 11/Aug/2016 23:13:08Available CPU Cores: 4 >>> 11/Aug/2016 23:13:08Max flow duration set to 120 sec >>> 11/Aug/2016 23:13:08Max flow idleness set to 30 sec >>> 11/Aug/2016 23:13:08Flow hash size set to 512000 buckets >>> 11/Aug/2016 23:13:08Hashes will have up to 2000000 buckets >>> 11/Aug/2016 23:13:08WARNING: No flow export defined (missing -5/-9 >>> parameters) >>> 11/Aug/2016 23:13:08WARNING: Flows are just harvested after they are expired >>> 11/Aug/2016 23:13:08Reading packets from interface ens192... [coreId: 0] >>> 11/Aug/2016 23:13:08Created interface ens192 >>> 11/Aug/2016 23:13:08WARNING: Your cento license (S) does not allow >>> (err=2 pid=15016) to open >>> 11/Aug/2016 23:13:08WARNING: the interfaces you have specified. Please >>> review the >>> 11/Aug/2016 23:13:08WARNING: command line parameters or upgrade the >>> cento license type >>> 11/Aug/2016 23:13:08WARNING: Running in demo mode (5 min) >>> 11/Aug/2016 23:13:08Initializing ens192... >>> 11/Aug/2016 23:13:08Started packet capture on ens192... >>> 11/Aug/2016 23:13:08cento changed user to 'nobody' >>> 11/Aug/2016 23:13:09Started flow exporter for ens192 >>> >>> What am I doing wrong here? >>> _______________________________________________ >>> Ntop-misc mailing list >>> [email protected] >>> http://listgateway.unipi.it/mailman/listinfo/ntop-misc >> >> >> _______________________________________________ >> Ntop-misc mailing list >> [email protected] >> http://listgateway.unipi.it/mailman/listinfo/ntop-misc > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
