Jeremy are you using Napatech NICs perhaps? If so, you need to start the napatech services (/opt/napatech….)
Cheers Luca > On 13 Jul 2016, at 19:27, Jeremy Ashton <[email protected]> wrote: > > Recently when I tried to configure an additional interface I got the > following error: > > [zbalance_ipc] NT_ExplainError: Code=0x20000013 Error="NT Service is > not started" > NT_Init() failed: NT Service is not started > [zbalance_ipc] NT_ExplainError: Code=0x20000013 Error="NT Service is > not started" > NT_InfoOpen() failed: NT Service is not started > 13/Jul/2016 17:21:25 [zbalance_ipc.c:566] ERROR: pfring_zc_open_device > error [Socket operation on non-socket] Please check that zc:<xxx> is > up and not already used > > I get this error when running: > sudo /usr/local/bin/zbalance_ipc -i zc:<xxx> -c 50 -n 2 -m 2 -g 0 -p > > which works perfectly fine for 4 other interfaces. The only > difference being that each interface gets assigned its own clusterid. > > The box is Supermicro with XL170 NICs running Ubuntu 14.04. > > Any thoughts on how I might approach this? > > Cheers. > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc _______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
